CRYSTORAMA 524-SA Palla 3 Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
524-SA Palla 3 Light Ceiling Mount
Instruction Manual
524-SA Palla 3 Light Ceiling Mount
ASSEMBLY INSTRUCTION MODEL #524-SA
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes. You will need 3-Candelabra Base Bulb 40 Watts Recommended 60
Watts Max.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED.
How to install
- Remove the frame by rotating it clockwise.
- Insert recommended bulbs (not included).
- Put the frame back by rotating it counter clockwise.
Crystal Sets
A.4 Pieces ………………………………50mm
B.17 Pieces …………………………….40mm **Capiz Shell Sets
** C.4 Pieces……………………. 80mm
D.12 Pieces……………….. 60mm
E.4 Pieces …………………..40mm
F.16 Pieces …………………30mm
WARNING:This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part number
A. (1) – Mounting Hardware
B. (1) – Canopy(W7.87″,H0.98″) #XRE524SACAN7.87IN
C. (2) – Hex Nut
D. (2) – Ball Nut
E. (1) – Center Stem(4.33″,9.53mm) #XRE524SASTEM4.33IN
F. (1) – Frame