JOHN LEWIS Reflex bench User Manual
- June 7, 2024
- John Lewis
Table of Contents
Reflex bench
Stock number : 836 21201
H45 W40 D113.5cm
Thank you for purchasing the Reflex bench. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety, and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required
Time to assemble 30 Minutes
People to assemble
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may
occur.
Reflex bench
Internal dimensions
Stock number: 836 21201
Reflex bench , overall size: H45 W40 D113.5cm
| Ref | Dimensions | Qty |
|---|---|---|
| 1 | Table Top | 1 |
| 2 | Leg frame | 2 |
Internal dimensions
Stock number: 836 21201
Reflex bench , overall size: H45 W40 D113.5cm
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref
| Description| Dimensions| Qty|
---|---|---|---|---
A| Bolt| 8mm x 25mm| 8|
B| Felt pad| Ø30mm| 4| 
C| Allen Key K4| | 2|
Product assembly
Reflex bench
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
Care guide
Care and maintenance
Wood furniture
Wood displays different grain patterns depending on which way they are cut
for example, the `medullary ray’ which can appear on oak furniture is a mark
of good quality timber-these are just characteristics of the natural beauty of
the wood. Some furniture is also deliberately aged and rustic. Wood veneers
also allow a distinctive pattern to be created on some surfaces, such as
tabletops and drawer fronts by the way slivers are arranged. All timber and
veneer surfaces will change colour and mellow over time. New furniture will
initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
Your Reflex bench furniture should be dusted or wiped over with a damp cloth.
Do not use abrasive cleaner. Spray polishes are best avoided as they contain
silicones which may spoil the furniture’s surface when building up over time.
Make sure all surface are protected from heat and liquids by mats and
coasters. Wipe up spills immediately and ensure that a mat or pad is placed
under if you are writing. Our furniture will endure most temperatures in the
home, but it is best to avoid placing furniture next to heat sources such as
radiators or fires. Be particularly careful with solid wood as the lack
humidity caused by home heating can cause damage such as warping.
How often should the piece of furniture be treated with oil?
- Preferably already before use
- The surface should be treated when necessary, and we suggest as often as every three months
How do you apply the oil to the piece of furniture?
- Apply plenty of oil with a clean cloth. Table tops must be treated underneath as well as on the top side. (Do not drop oil on the floor!)
- After 15 minutes, polish with a sandpaper sponge or fine sandpaper (no. 150) along the grains of the wood
- Polish off remaining oil with a clean, dry cloth
- Do not use the item, until the oil is completely absorbed Your piece of furniture is already oil treated from the factory. We recommend to use Woca “Worktop oil natural” item no. 527713AA (0,75 L) available at http://www.wocadenmark.co.uk
Safety instructions
Never drag furniture when moving it, always lift it. Periodically check all
fixings to ensure none have come loose and retighten when necessary. Please
take care when handling or moving the furniture as careless handling may cause
damage or injury. Furniture can be dangerous if incorrectly installed.
Assembly should be carried out by a competent person. No liability will be
accepted for damage or injury caused by incorrectly installed or assembled
furniture. Your feedback is very important to us and we would love to hear
your comments on your new furniture. Please visit our website to leave a
review. Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>