JOHN LEWIS Bankers Table Lamp User Guide
- June 7, 2024
- John Lewis
Table of Contents
John Lewis Bankers Table Lamp User Guide
Introduction
Thank you for purchasing this Bankers Table Lamp.
Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
This fitting should be fitted in accordance with IEE Regulations and the Building Regulations. If in any doubt, or where required by law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority.
Always use the correct type and wattage bulb. Never exceed the wattage stated. The flexible cable on this luminaire, if damaged, shall only be replaced by the manufacturer or his service agent or a similar qualified person.
It is the installer’s responsibility to ensure that the fixings and plugs used are suitable for the surface you are fixing your product on.
Caution! The bulb and surrounding parts can become hot during use.
Do not cover. Keep away from curtains, bedding etc.
Always route mains cable so it does not present a hazard (entrapment, tripping etc.);
Ensure that there are no twists or snags in the cable.
Plug into the mains supply; switch on using the inline cord switch provided. If moving this lamp, always carry by holding the stand part (and not the glass.)
Parts list
Product assembly
Step 1
Carefully unpack the carton, making sure all parts are present before assembly. Place lamp on a flat surface
Step 2
This is fully assembled product. Attach the correct type and wattage bulb to
the lamp holder (bulb not included).
The maximum power indicated must not be exceeded.
Step 3
Insert the plug into the power supply and turn on the switch.
Caring for your product
Indoor use only
Non-Dimmable
Replace bulbs from John Lewis or established brand of the same type and
compatibility
Recommended the fitting should be cleaned with a soft dry cloth.
Aftercare and Troubleshooting
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or John Lewis & Partners Technical Support on 03301 230106.
Specification
Recommended bulb: SES Candle LED bulb
Rated power: 4W LED Max
Bulb not included
Voltage: 220 –240V, 50Hz
IP rating: 20
Weight: 1.5kg
5 year guarantee
AtJohn Lewis&Partners we test every light to high quality standards so we are able to offer you a 5 year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate in store take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made inChina
Please retain these instructions for future reference.
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>