Johan Lewis Zena Led Bar Pendant User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis Zena Led Bar Pendant User Manual
Zena Led Bar Pendant
Recommended bulb
1 x 20.9 Watt energy efficient LED (non-replaceable)
Bulb included
Specification
Max power: 20.9W
Voltage: 220~240V, 50/60Hz
IP20 Weight 1.65 Kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal house-
hold waste and it should be recycled. John Lewis does not operate in store
take back, but as members of the Distributer Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it
to your nearest collection facility or for further details contact your local
council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition. However, should any parts be damaged or missing please e-mail
lightingparts@JLPspares.co.uk
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
John Lewis partnership 171 Victoria Street London SW1E 5NN Johnlewis.com
Made in China Issue 01 04/18
Thank you for purchasing this Zena LED ceiling pendant.
Please read the instructions carefully before use to ensure safe and
satisfactory operations of this product. Please keep this instruction for
future reference.
Warnings!
This product is Class and should be fitted to a lighting Supply protected by a
5 amp fuse or equivalent circuit breaker.
For your safety, this product must be installed in accordance with local
Building Regulations. If in any doubt, or where required by the law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or phone your Local Authority.
To prevent electric shock, switch off the mains supply before installing or
maintaining this product. Ensure other persons cannot restore the electricity
supply without your knowledge. The light source of this luminaire is not
replaceable; when the light source reaches the end of its end of life the
whole luminaire shall be replaced.
For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Parts list
Assembly
Never install your appliance on a wet, freshly painted or plastered surface.
Ensure the house electricity supply is switched off at the fuse box. If
removing an existing fitting, note down all wiring connections. Check the
fixings will not touch any existing wiring before drilling and attaching the
light to the ceiling.
Ensure you thread the wall wires through the black insulating tube fixed to
the appliance.
Step 1
Detach mounting bracket from fitting by removing the retaining screws and washers, retain for later. Using the mounting bracket as a template, mark and then drill the fixing holes in the ceiling (ensure the screws are firmly fixed into a solid or other suitable mounting and not just the plasterboard.). Take care not to damage wiring. Attach mounting bracket to the mounting surface using suitable fixings. Do not attach fitting to mounting bracket at this stage. Make sure no wires are trapped in the process.
Step 2
Height adjustment: The height of the fitting is adjustable prior to electrical
installation only. To adjust the length of cable, pull the metal support wire
through into the ceiling cup until the desired height is achieved. If you wish
to lengthen the wire again simply push the small tube that the wire passes
through in on itself (it is spring loaded) and gently pull the wire back
through to the desired length, as soon as the tube is released it will
automatically lock in position again.
Ensuring that the power has been isolated, connect the electrical supply wires
to the connector blocks corresponding terminals. Wrap the terminal block in
two layers of insulating tape. Make the electrical connections as follows:
- Live (Normally brown or red) to fitting live (marked “L”)
- Neutral (blue or black) to fitting neutral (marked “N”)
NO EARTH must be connected to any part of this fitting. Please note that residential wiring can vary, if you are unsure about the correct polarity please consult a qualified electrician.
Step 3
Excess cable must be carefully located inside ceiling cup or within the
ceiling void. Carefully offer fitting over mounting bracket then secure in
place with the screws and washers removed earlier. Once installation is
complete, the house electricity may be restored at the fuse box.
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>