Johan Lewis Scandi marble Floor lamp User Manual

June 7, 2024
JOHAN LEWIS

Johan Lewis Scandi marble Floor lamp User Manual

Johan Lewis Ribs Frosted Glass Pendant User Manual

Scandi marble Floor lamp

Recommended bulb
1 x 9-11 Watt ES energy efficient LED GLS
or
1 x 42 Watt ES eco halogen GLS
Bulb not included

Specification
Max power: 42W
Voltage: 220~240V, 50Hz
IP20 Weight 10.7Kg

Please retain these instructions for future reference.
This symbolindicates that this product should not be treated as normal house- hold waste and it should be recycled. John Lewis does not operate in store take back, but as members of the Distributer Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please e-mail [email protected]

Trouble shooting:

Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
John Lewis partnership
171 Victoria Street
London SW1E 5NN Johnlewis.com
Made in China Issue 2 04/18User manual Scandi marble Floor lamp

Thank you for purchasing this Scandi marble floor lamp. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product.
Please keep this instruction for future reference.

Warnings!

The supply cable runs through the inside of this product. Take care not to place undue stress on the cable whilst unpacking to prevent the possibility of a poor connection.
If you are in any doubt consult a person competent to give advice on the assembly of electrical equipment. If the external flexible cable of the lamp is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
To prevent electrocution switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly. Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed the wattage stated. When changing the bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully. Caution! The bulb and surrounding parts can become hot during use. For indoor use only.
Care instructions We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and compatibility.

Parts list

diagram

Assembly

Ensure fitting is not plugged into the mains supply before assembling or maintaining this fitting.

Step 1

Unpack the product and remove all packaging. Be careful not to scratch the surface of the product whilst removing the wrapping.
Carefully pull any slack cable through the stem until the upper stem section meets the lower stem.
Insert the upper stem section into the lower stem section ensuring the holes on the outside of the lower stem are aligned with the indents on the inside of the upper stem. Insert the grub screws into the stem and fully tighten using the hex key provided.

Step 2

Insert the lower stem section into the base stem section ensuring the indents on the outside of the centre stem are aligned with the holes on the outside of the base section. Insert the grub screws into the base section and tighten using the hex key provided. Stand the floor lamp upright and ensure all the assembled parts are fully tightened.

Step 3

To fit shade: Remove the shade ring from lamp holder, fit the shade and replace shade ring to secure in place. Take care not to overtighten as this may cause damage to the fitting. Fit the bulb, type and wattage as indicated on the fitting (bulb not supplied). The wattage indicated must not be exceeded. Floor lamp is now ready for use.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

JOHAN LEWIS User Manuals

Related Manuals