Johan Lewis Emilia Crystal Wall Light User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
John Lewis Emilia Crystal Wall Light
Thank you for purchasing this John Lewis Emilia crystal wall light. carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference.
Warnings!
The fitting is class II.
This fitting should be fitted in accordance with IEE Regulations and the
Building Regulations. If in any doubt, or where required by law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or from your Local Authority.
To prevent electric shock switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity
supply without your knowledge.
If you are in any doubt, please consult a qualified electrician. If replacing
an existing fitting, make a note of the connections. Always use the correct
type and wattage bulb. Never exceed the wattage stated. When changing a bulb,
always switch off at the mains and allow the old bulb to cool down before
handling. Dispose of used bulbs carefully.
CAUTION! The bulb and surrounding parts can become hot during use.
Care instructions
- We recommend cleaning with a soft dry cloth.
- Do not use abrasive materials as these will damage the finish.
- Indoor use only.
- Replace bulbs from John Lewis or established brand of the same type and compatibility.
Parts list
Assembly
Ensure the house electricity supply is switched off at the fuse board.
Step 1
Ensure that the bracket (supplied is fixed to a wall which will support the
weight of the fitting.
Step 2
Connect cables or terminals as shown below:
Check all wires are tight in the terminal block, and no loose strands are left
out. Cover with insulating tape (not included).
Step 3
Attach wall light to bracket, then attach crystal chain to main frame. Fit the
light bulb into the lamp holder. The maximum power indicated must not be
exceeded
Step 4
Attach aluminium rods to main frame as shown. Switch on the electricity supply
at the fuse board.
Recommended bulb:
1 x 28W G9 bulb eco halogen capsule bulb
Bulb not included
Dimmable
Specifications
Max. power: 33W
Voltage: 220~240V, 50/60Hz
Weight: 0.4kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate instore
take back, but as members of the Distributor Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it
to your nearest collection facility or for further details contact your local
council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition. However, should any parts be damaged or missing please e-mail
[email protected]
Trouble Shooting:
Why is the light not working when switched on? Check your power supply is
switched on
Turn off light and check that the bulb is inserted correctly Check the bulb is
still in working order.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- 📧[email protected]
- Everything you need to know to Recycle More
- Everything you need to know to Recycle More