Johan Lewis House 5lt Semi Flush User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
Johan Lewis House 5lt Semi Flush User Manual
House 5lt Semi Flush
Recommended bulb
5 x 3-6 Watt E27 energy efficient LED or 5 x 28 Watt E27 eco halogen capsule
Bulb not included
Specification
Max power: 40W Voltage: 220~240V, 50/60Hz IP20 Weight 0.9Kg
Please retain these instructions for future reference.
This symbolindicates that this product should not be treated as normal house-
hold waste and it should be recycled. John Lewis does not operate in store
take back, but as members of the Distributer Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it
to your nearest collection facility or for further details contact your local
council or visit www.recycle-more.co.uk.
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly Check the bulb is
still in working order.
John Lewis partnership 171 Victoria Street London SW1E 5NN Johnlewis.com
Made in China Issue 1 09/19
Thank you for purchasing this House semi flush ceiling light. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product. Please keep this instruction for future reference.
Warnings!
For your safety, this product must be installed in accordance with local
Building Regulations. If in any doubt, or where required by the law, consult a
competent person who is registered with an electrical self-certification
scheme. Further information is available online or phone your Local Authority.
To prevent electric shock, switch off the mains supply before installing or
maintaining this product. Ensure other persons cannot restore the electricity
supply without your knowledge. Always use the correct bulb type with the
correct wattage as indicated in the specification table. This product is Class
II = and should be fitted to a lighting Supply protected by a 5 amp fuse or
equivalent circuit breaker. When changing the bulb, always switch off at the
mains and allow the old bulb to cool down before handling. Dispose of used
bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use. For indoor
use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Replace bulb from John Lewis or established brand of the same type and
compatibility.
Parts list
Assembly
Never install your appliance on a wet, freshly painted or plastered surface. Ensure the house electricity supply is switched off at the fuse box. If removing an existing fitting, note down all wiring connections. Check the fixings will not touch any existing wiring before drilling and attaching the light to the ceiling. Ensure you thread the ceiling wires through the black insulating tube fixed to the appliance.
Step 1
Remove mounting bracket from fitting by removing the retaining screws and any washers, retain for later. Using the mounting bracket as a template, mark and then drill the fixing holes in the ceiling (ensure the screws are firmly fixed into a solid or other suitable mounting and not just the plasterboard.) Take care not to damage wiring. Attach mounting bracket to the mounting surface using suitable fixings. Do not attach fitting to mounting bracket at this stage. Make sure no wires are trapped in the process.
Step 2
Attach the main stem of the fitting into the central hub section by rotation
into place. Once the stem has been fully tightened, lock the stem in place by
tightening the small hex screw located on the receiving collar using the hex
key provided.
Step 3
Ensuring that the power has been isolated, connect the electrical supply wires to the connector blocks corresponding terminals. Make the electrical connection as follows:
- Connect the supply live (normally brown or red) to fitting live (marked “L”) on the terminal block housing.
- Connect the supply neutral (normally blue or black) to fitting neutral (marked “N”) on the terminal block housing.
NO EARTH must be connected to any part of this fitting. Please note that residential wiring can vary, if you are unsure about the correct polarity please consult a qualified electrician. Ensure electrical connections are tight and no loose strands of wire protrude from the terminal block then close connector block cover by snapping back together.
Step 4
Excess cable must be carefully located inside the ceiling cup or within the ceiling cavity itself. Carefully offer fitting over mounting bracket then secure in place with the screws and any washers removed earlier. Fit the bulb: type and wattage as indicated on the fitting. The wattage indicated must not be exceeded. Once installation is complete, the house electricity may be restored at the fuse box.
Read More About This Manual & Download PDF:
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>