Johan Lewis Mizar 5lt Semi Flush User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
User Manual
Mizar
5lt Semi Flush
Care and cleaning
Finish – We recommend cleaning with a soft dry cloth. Do not use abrasive
materials as these will damage the finish.
Glass parts – Remove and wash in warm water or just use a damp cloth. Do not
use abrasive materials as these will damage the finish.
Recommended bulb
5 x 40W
SES Golf
or
5 x 5-7W
SES LED Energy Efficient Golf Ball Clear
or
5 x 28W
SES Eco Halogen Golf Ball
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling. Use a soft cloth to handle halogen bulbs, avoid directly touching the bulbs as this will shorten their life. Dispose of used bulbs carefully. Do not exceed the wattage stated or use a different shape bulb from that indicated on the fitting.
Specification
Maximum wattage: 40W
Voltage: 240V, 50Hz
IP Rating: 20
Weight: 1.24kg 
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis do not operate instore take back, but as members of the Distributor Trade Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please contact our Product Helpline on (01202) 690945.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China 02/02/2021
Thank you for purchasing this Mizar light fitting. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Please keep these instructions for future reference.
Warnings!
This is a Class 1 product and must be earthed.
Please read these instructions carefully before commencing any work. It is
recommended that this fitting is installed by a qualified electrician.
Install in accordance with the IEE Wiring regulations and the Building
Regulations.
To prevent electrocution switch off at mains supply before installing or
maintaining this fitting.
Ensure other persons cannot restore the electrical supply without your
knowledge.
If you are in any doubt, please consult a qualified electrician.
This light fitting should be connected to a 5 amp fused circuit.
If replacing an existing fitting, make a note of the connections.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
When changing a bulb or adjusting the heads, always switch off at the mains
and allow to cool down. Dispose of used bulbs carefully.
This product is suitable for indoor use only.
This product is suitable for installation on surfaces with normal flammability
e.g. wood, plasterboard, masonry. It is not suitable for use on highly
flammable surfaces (e.g. polystyrene, textiles).
Fixing Instructions
Make sure you have the following items which are required to install this
light fitting:
Small electrical screwdriver, cross head screwdriver & insulation tape.
The installation of this fitting will be much easier with the help of an
assistant.
Parts List
Light
fitting|
| 1
---|---|---
Screws|
| 2
Glass Shades|
| 5
Tool| 
| 1
Wall plugs|
| 2
Installation Instructions
Refer to assembly diagrams. Carefully unpack the carton, making sure all the
parts are present before assembly. Fold the arms out on the light fitting.
Step 1
Existing ceiling roses must be completely removed before installation of a new
product. Before removing the existing fitting or ceiling rose, carefully
note the position of each set of wires.
Step 2
Remove the fixing bracket (A) from the ceiling cover by removing side screws
(B) and attach to the ceiling using the screws provided. Ensure there is a
joist at the point of fixing to support the weight of the product. Take care
to avoid damaging any concealed wiring and pipes.
Step 3
Having identified the household wiring from your existing light fitting,
connect to the connection block inside the product in the following way:
Check that…..
You have correctly identified the house wires.
The connections are tight.
No loose strands have been left out of the connection block.
Step 4
When completed, ensure that there are no bare or loose strands of wire
exposed, and cover all exposed areas of the connection block with 2 layers of
insulation tape.
Step 5
This product has “L” shaped fixing slots to allow easy fixing to the ceiling
strap. Locate the “L” slots (C) around the small screws (B) on the ceiling
strap (A) (see diagram in step 2). Rotate the ceiling cover to attach the
product to the strap. Tighten the screws to secure. Take care not to trap any
wiring.
Attaching the shades
To attach the glass shades remove shade ring (A) from threaded body (B), place
glass over threaded body (B) and replace the shade ring (A), tighten with
light pressure. A tool is supplied for fixing the shade ring. Please keep this
for future use.
Step 6
Fit the recommended bulb as per the details on the back.
Step 7
Replace fuse or circuit breaker and switch on. Your light is now ready for
use.
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>