Johan Lewis Paige Table Lamp User Manual
- June 7, 2024
- JOHAN LEWIS
Table of Contents
IL2555
Thank you for buying this Paige table lamp.
Please read the instructions and warnings carefully before use to ensure the safe and satisfactory operation of this product.
Warnings
- If the flexible cable of this product is damaged it should be exclusively replaced by the manufacturer or a similarly qualified person in order to avoid a hazard.
- To prevent electrocution switch off at the mains supply before assembling or maintaining this fitting. Ensure the plug is not connected to any power supply and read instructions before assembly.
- This product is fitted with a 3 amp fuse and is suitable for 240-volt ring mains.
- Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed the wattage stated.
- When changing the bulb, ensure the product is unplugged and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.
- This fitting is designed for use with self-shielded tungsten halogen lamps only.
Assembly Instructions
Unpack the lamp and remove all packaging. Be careful not to scratch surfaces
of the product whilst unpacking.
Step 1: Fit bulb, type, and wattage as indicated on fitting. The wattage
indicated must not be exceeded. Use only self-shielded bulbs. Do not touch
halogen bulbs with bare hands, as this will shorten their life.
Step 2: Fit the glass, remove the threaded ring from the lamp holder and place
the glass onto the lamp holder. Secure glass in position by tightening the
threaded ring up that was removed using the tool provided.
This lamp is operated by an ON/OFF touch sensor. Touch the base once to turn
on the light, touch again to turn the light off.
Please retain this information leaflet for future reference
GENERAL INFORMATION
This product is designed for internal use only
**Do not use polish or an abrasive cleaner – just a soft dry cloth.
**
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com
Issue 2 10/17