legrand RT-200 Astronomical Time Switch Installation Guide

: June 13, 2024
: Legrand

Table of Contents

RT-200 Astronomical Time Switch
Specifications:
Product Information:
Installation & Wiring:
Setup:
FAQ:
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RT-200 Astronomical Time Switch

“`html

Specifications:

Voltage: 120/277VAC, 50/60Hz

Load (Single Pole): 0-800W tungsten or ballast,
1/6HP

Environment: Indoor Use Only

Product Information:

The RT-200 is an astronomic time clock and timer switch that
controls the connected light or fan either manually or through user
programmed times. It requires the user to enter longitude/latitude
coordinates, date, and local time during installation to ensure
accurate scheduling. The switch features a customizable manual
override with a default countdown of 2 hours. An amber LED
illuminates the ON/OFF button when the load is OFF for easy
visibility in the dark.

Installation & Wiring:

Prepare the switch box by turning off power at the circuit
breaker and removing the existing wall plate.
Identify the type of circuit (single pole) and wire the time
switch according to provided instructions.
Secure the RT-200 in the wall box with screws and install an
industry standard decorator wall switch cover plate.
Restore power to the circuit by turning on the breaker or
replacing the fuse.

Setup:

To access the programming buttons, use a flat head screwdriver
behind the lip at the top of the ON/OFF button. The three
programming buttons are used to set up the astronomic time switch
according to user preferences and location. The unit automatically
exits to the MAIN PAGE after 10 minutes of inactivity in SETUP
menu.

FAQ:

Q: Is it safe to install the RT-200 on a 3-way switching
circuit?

A: No, the RT-200 is only suitable for single
pole circuits. Consult with a qualified electrician if your
existing wiring does not match this description.

“`

Wattstopper ®
Astronomical Time Switch (version 2)

No: 24258 01/24 rev. 4

Installation Instructions · Instructions d’Installation · Instrucciones de Instalación

Catalog Number · Numéro de Catalogue · Número de Catálogo: RT-200
Country of Origin: Made in China · Pays d’origine: Fabriqué en Chine · País de origen: Hecho en China

SPECIFICATIONS
Voltage ……………………………………………..120/277VAC, 50/60Hz Load (Single Pole)……………. 0-800W tungsten or ballast, 1/6HP Environment ……………………………………………… Indoor Use Only
Operating Temperature ………….. 32° to 122° F (0° to 50° C) Humidity ………………………………. 95% RH, non-condensing Countdown Options……….. none, 5 min, 10 min, 15 min, 30 min, …………………………1 hr, 2 hr (default), 3hr, 4 hr, 5 hr, or 6hr Tools Needed Insulated Screwdriver Wire Strippers

DESCRIPTION AND OPERATION
The RT-200 is an astronomic time clock and timer switch that controls the connected light or fan either manually or through user programmed times. Upon installation the user enters the correct longitude/latitude coordinates, date, and local time. This ensures that once the schedules are programmed, the load turns ON/OFF at the correct local times. The button switch is a customizable manual override feature with a default countdown of 2 hours.
Lighted Switch To help locate the switch button in a dark room, an amber LED illuminates the ON/OFF button while the controlled load is OFF. When the load is ON, the LED is OFF.
WARNING DISCONNECT POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING THIS PRODUCT. ONLY CONNECT THE RT-200 TO A SINGLE POLE CIRCUIT. THE RT-200 IS NOT SUITABLE FOR 3-WAY SWITCHING.
IF THE EXISTING WIRING DOES NOT MATCH THE DESCRIPTION FOR A SINGLE POLE CIRCUIT, YOU SHOULD CONSULT WITH A QUALIFIED ELECTRICIAN.

INSTALLATION & WIRING
1. Prepare the switch box After the power is turned OFF at the circuit breaker box, remove the existing wall plate and mounting screws. Pull the old switch from the wall box.
2. Identify the type of circuit In a single pole circuit, two single wires connect to two screws on the existing switch. A ground wire may also be present and connected to a ground terminal on the old switch. A neutral wire should also be present in the wall box.
3. Prepare the wires Tag the wires currently connected to the existing switch, so that they can be identified later. Disconnect the wires. Make sure the insulation is stripped off the wires to expose their copper cores to the length indicated by the “Strip Gauge” (approximately ½ inch).

Black > HOT (power from circuit box)
TOP

Red > LOAD (power to lamp or fan)

INDOOR USE ONLY

White > NEUTRAL

Strip Gauge
1/2″ 12.7mm

Industry standard switch cover plate (not provided)

Green > GROUND Terminal

4. Wire the time switch Twist the existing wires together with the wire leads on the RT-200 as indicated in the table below. Cap them securely using the wire nuts provided.

Power wire from the circuit (hot)

to

Power wire from the lamp or fan (load) to

Neutral wires from the circuit

to

Ground wire from the circuit

to

Black wire on RT-200 Red wire on RT-200 White wire on RT-200 Ground terminal on RT-200

5. Put the RT-200 in the wall box with the display positioned above the ON/OFF button. Secure it to the wall box with the screws provided.
6. Install cover plates. Install industry standard decorator wall switch cover plate (not included).
7. Restore power to the circuit. Turn on the breaker or replace the fuse.

SETUP

To access the programming buttons, place the tip of a flat head screwdriver behind the lip at the top of the ON/OFF button and pull the button toward you. Slide the ON/OFF button down over the wallplate.

Buttons

The three

programming

buttons are used

to set up the astronomic time

Display

switch according

to the user’s

Lower Button

preferences and

Save/

location.

Select

Center Button Select/Save Menu/Raise
Slide Down ON/OFF Button

RT-200 Menu Options
Once in the SETUP menu if there is no activity for 10 minutes, the unit automatically exits out to the MAIN PAGE.

From the standard display, known as the “MAIN PAGE” press and release the button to enter SETUP menu.

DST Tue 03/31/2020
12:04PM
PROG

Press the button to move to desired SETUP menu option.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

When the option that you want to program is highlighted, press the center button.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

VIEWING SETTINGS
Once the RT-200 has been completely set up, it is possible to see the various programs without needing to enter the SETUP menu. From the MAIN PAGE press and hold the ON/OFF button. After 5 seconds the display changes to show the sunrise and sunset time. Continue to press and hold the ON/OFF button. The display will cycle through the 8 programs. Once the RT-200 has completed this cycle, it will continue to cycle through the programs as long as the button is being pressed.
MANUAL-ON
When the lights are turned ON manually, the word MANUAL appears on the bottom left corner of the display (replacing PROG). The default manual override time of the switch is 2 hours, and can be programmed to a countdown of NONE, 5, 10, 15 minutes or 1-6 hours. For example, if the countdown timer was scheduled to 2 hours, a load was scheduled to turn OFF at 10:00 PM, and a user turns the load ON at 10:15 PM, the lights will remain ON until 12:15 AM. If the load was scheduled to turn ON at 6:00 AM and the load is manually turned OFF at 9:30 AM, the load will remain OFF until 6:00 AM the following day or until manually turned ON. When the load is ON the light bulb on the lower right corner of the display on the MAIN PAGE will have light beams surrounding it. When the connected load is OFF, the light beams will disappear.
POWER FAILURE
In the event of a loss of power to the RT-200, the unit will maintain the correct time, location and settings for 72 hours. 2

SET TIME AND DATE MENU

Within the SET TIME AND DATE menu you will enter the correct time, date and Daylight Savings Time (DST) start and end days. The unit is shipped with the correct DST start and end dates already programmed.

Setting

Steps

TIME

Hour

1. From the SETUP menu highlight SET TIME AND DATE and press the center button. TIME should be highlighted.
2. Press the center button to highlight hour.
3. Press the button to decrease the hour or the button to increase the hour.
4. Press the center button to save hour setting and move highlighted cursor to minute.

Minute

1. Press the button to decrease the minute or the button to increase the minute.
2. Press the center button to save time setting.

DATE

1. Press the button to highlight DATE.

Month

1. Press the center button to highlight month.
2. Press the button to decrease the month or the button to increase the month.
3. Press the center button to save month setting and move highlighted cursor to day.

Day

1. Press the button to decrease the day or the

button to increase the day.

2. Press the center button to save day setting

and move highlighted cursor to year.

Year

1. Press the button to decrease the year or the button to increase the year.
2. Press the center button to save year setting.

DST (DAYLIGHT SAVINGS TIME)

Factory Default Setting: DST ENABLED (The unit will automatically adjust for Daylight Savings Time).
Press the button to highlight DST

DST
When enabled, DST appears in the upper right corner of the MAIN PAGE.

1. Press the center button to highlight ENABLED.
2. Press the button to switch between ENABLED and DISABLED.
3. Press the center button to save DST setting.

Start – Week (Input week when DST starts)

1. Press the button to highlight START. Press the center button to highlight 1st.
2. Press the button to decrease the week of the month or the button to increase the week of the month.
3. Press the center button to save the week and move highlighted cursor to the month.

Start Month (Input month when DST starts)

1. Press the button to decrease the start month or the button to increase the start month.
2. Press the center button to save month.

End Week 1. Press the to highlight End. 2. Follow same steps for Start Week.

End Month Follow same steps for Start – Month.

LOCATION MENU
Within the LOCATION menu you will be required to enter the local longitude/latitude coordinates and time zone. If you do not know this information, we have included a list of the major US cities on page 5. You can also find latitude and longitude lookup tools on the internet. One example is www.latlong.net.

Setting TIME ZONE
LONGITUDE LATITUDE

Steps
1. From the SETUP menu highlight LOCATION and press the center button. TIME ZONE should be highlighted.
2. Press the center button to select the time zone.
3. Press the button to decrease the time zone or the button to increase the time zone.
4. Press the center button to save time zone setting.
1. Press the button to highlight LONGITUDE. 2. Press the center button to select the
longitude
3. Press the button to decrease the longitude or the button to longitude the time zone.
4. Press the center button to save longitude setting.
1. Press the button to highlight LATITUDE. 2. Press the center button to select the
latitude.
3. Press the button to decrease the latitude or the button to latitude the time zone.
4. Press the center button to save latitude setting.

To exit the LOCATION menu, press the button to highlight PREVIOUS MENU. Press the center button to select and return to the SETUP menu. Once the location information is entered, return to the MAIN PAGE and press the left button. This will display the sunrise and sunset times. Use this as a check to validate that the location information has been entered in correctly.
COVER PLATES
Wattstopper RT wall switches fit behind industry standard decorator style switch cover plates.
TROUBLESHOOTING
Lighted switch is OFF, no load response to ON/OFF button press: · Make certain that the circuit breaker is on and functioning.
Lighted switch is ON, no load response to ON/OFF button press: · Check the light bulb and/or motor switch on the fan mechanism.
NOTE: If load does not respond properly after following troubleshooting, turn OFF power to the circuit then check wire connections or call technical support.

To exit SET TIME AND DATE menu, press the button to highlight PREVIOUS menu. Press the center button to select and return to
the SETUP menu. 3

PREFERENCES

SCHEDULING

The PREFERENCES menu allows the user to customize the unit’s features including the time/date format, sound and flash.
· Time format choose between a 12-hour or 24-hour format
· Date format choose between MM/DD/YY or DD-MM-YY
· Sound When SOUND is enabled the RT-200 will beep every 5 seconds when the load is going to be turned OFF in less than a minute. It will also beep each time the user presses the , the center, or the button. A small ear icon will appear on the MAIN PAGE when sound is enabled.
· Flash When FLASH is enabled the RT-200 turns OFF the load for 1 second and then turns it back ON to warn the user that the load is turning OFF in 1 minute. When flash is enabled, a lightening bolt icon will appear on the MAIN PAGE.
· Countdown When COUNTDOWN is enabled, the manual override to turn a load ON times out. Default countdown of manual override is 2 hours, but this can be adjusted or disabled. Available values: None, 5 min, 10 min, 15 min, 30 min, 1 hr, 2 hr, 3hr, 4 hr, 5 hr, or 6 hr.

Setting

Steps

TIME FORMAT

1. From the SETUP menu highlight PREFERENCES and press the center button. TIME FMT should be highlighted.
2. Press the center button to select time format.
3. Press the button to change format. 4. Press the center button to save time
format setting and to move highlighted cursor back to TIME FMT.

DATE FORMAT

1. Press the button to highlight DATE FMT. Press the center button to select date format.
2. Press the button to change format.
3. Press the center button to save date format.

SOUND

1. Press the button to highlight SOUND. Press the center button to select the sound setting.
2. Press the button to enable or disable sound.
3. Press the center button to save setting.

FLASH

1. Press the button to highlight FLASH. Press the center button to select the flash setting.
2. Press the button to enable or disable flash.
3. Press the center button to save setting.

COUNTDOWN

1. Press the button to highlight COUNTDOWN. Press the center button to select the countdown setting.
2. Press the button or button to select the countdown time.
3. Press the center button to save setting.

To exit the PREFERENCES menu, press the button to highlight PREVIOUS MENU. Press the center button to select and return to
the SETUP menu.

The RT-200 has 8 programs allowing the user flexibility in setting schedules to turn the connected load ON/OFF.

Setting PROGRAM
Day(s) – Set the days of the week the lights will turn ON for that particular program
ON Program the time the connected load turns ON
OFF Program the time the connected load turns OFF

Steps
From the SETUP menu highlight SCHEDULING and press the center button. PROGRAM should be highlighted.
Press the center button to select program #.
Press the button to decrease the program and the button to increase the program #.
Press the center button to save the program #.
Press the button to highlight DAY(s). Press the center button to select the days when the program will operate.
Press the to choose the day(s); choices include:
None (program is not in use).
All (program turns ON the connected load every day).
Mon Fri (program turns ON the connected load Monday through Friday).
Weekends (program turns ON the connected load Saturday and Sunday.
Each individual day of the week (choose the day of the week that the connected load should turn ON).
Press the center button to save setting.
Press the button to highlight ON. Press the center button to select what time the load will turn on.
Press the to set the ON time; choices include:
TIME (program a specific time to turn ON the load).
DUSK (program up to 99 minutes before or after dusk for the load to turn ON. Note: this is one of the reasons that it is important that the correct time zone, longitude/latitude coordinates are entered so that the time switch can determine when dawn and dusk will take place).
DAWN (program up to 99 minutes before or after dawn for the load to turn ON.
Press the center button to save setting.
Press the button to highlight OFF. Press the center button to select what time the load will turn OFF.
Press the to set the OFF time; choices are the same as for the ON time.
Press the center button to save setting.

Follow the same steps to set Programs 1-8.
NOTE: For holidays, set a schedule for each individual day of week, and then change day to “None” for holiday shutoff.
To exit the SCHEDULING menu, press the button to highlight PREVIOUS menu. Then press the center button to select and return to the SETUP menu.

4

HOLIDAY OFF

The HOLIDAY OFF menu allows the user to set specific dates and duration that loads will be turned Off, There are 16 memory settings, allowing for programmming of up to 16 different holidays.
· Holiday Valus of 1 through 16. · Status choose between DISABLED or ENABLED · Start Date Set the date to beigin the HOLIDAY OFF function. · Duration The number of days the Holiday Off function will be active. Values of 1 though 99, default setting is 1.

Setting HOLIDAY
STATUS START DATE DURATION

Steps
1. From the SETUP menu highlight HOLIDAY OFF and press the center button. HOLIDAY should be highlighted. 2. Press the center button to select the program#. 3. Press the or buttons to increase the program #. 4. Press the center button to set the selected program # as the one being edited.
1. Press the button to highlight STATUS. Press the center button to select date format. 2. Press the button to enable or disable the status. 3. Press the center button to save the status.
1. Press the button to highlight START DATE. Press the center button to select the days, months, and years. 2. Press the or buttons to increase or decrease the months, days, or years value. 3. Press the center button to save the date.
1. Press the button to highlight DURATION. Press the center button to select number of days the load will turn OFF beginning when START DATE occurs (provided the STATUS is enabled).
2. Press the or buttons to enable or increase or decrease the DURATION value. 3. Press the center button to save setting.

To exit the PREFERENCES menu, press the button to highlight PREVIOUS MENU. Press the center button to select and return to the SETUP menu.

PRODUCT RESET

TOP MAJOR US CITY LOCATIONS

The RT-200 has a reset button located under the ON/OFF button. If the unit has lost power for an extended period of time (more than 72 hours) and the unit appears to be functioning abnormally (the display is not on or lights are not turning ON/OFF according to the appropriate schedule), it may be necessary to reset the unit. Press and release the reset button. The display will reset so that the Legrand logo appears as it does upon initial power up. At this point, the user will be able to set the date, time and location and reset the programs.
Reset Button
Save/ Select

CITY, STATE

GMT

Albuquerque, NM

-7

Arlington, TX

-6

Atlanta, GA

-5

Austin, TX

-6

Baltimore, MD

-5

Boston, MA

-5

Charlotte, NC

-5

Chicago, IL

-6

Cleveland, OH

-5

Colorado Springs, CO -7

Columbus, OH

-5

Dallas, TX

-6

Denver, CO

-7

Detroit, MI

-5

El Paso, TX

-7

Fort Worth, TX

-6

Fresno, CA

-8

Honolulu, HI

-10

Houston, TX

-6

Indianapolis, IN

-5

Jacksonville, FL

-5

Kansas City, MO

-6

Las Vegas, NV

-8

Long Beach, CA

-8

Louisville, KY

-5

Los Angeles, CA

-8

5

LAT LONG CITY, STATE 35 -107 Memphis, TN 32 -97 Mesa, AZ 34 -84 Miami, FL 30 -98 Milwaukee, WI 39 -77 Minneapolis, MN 42 -71 Nashville, TN 35 -81 New Orleans, LA 42 -88 New York, NY 41 -82 Oakland, CA 38 -104 Oklahoma City, OK 40 -83 Omaha, NE 33 -97 Philadelphia, PA 40 -105 Phoenix, AZ 42 -83 Portland, OR 32 -106 Raleigh, NC 33 -97 Sacramento, CA 37 -120 Salt Lake City, UT 21 -158 San Antonio, TX 30 -95 San Diego, CA 40 -86 San Francisco, CA 30 -82 San Jose, CA 39 -95 Seattle, WA 36 -115 Tucson, AZ 34 -118 Tulsa, OK 38 -86 Virginia Beach, VA 34 -118 Washington, DC

GMT -6 -7 -5 -6 -6 -6 -6 -5 -8 -6 -6 -5 -7 -8 -5 -8 -7 -6 -8 -8 -8 -8 -7 -6 -5 -5

LAT LONG 35 -90 33 -111 26 -80 43 -88 45 -94 36 -87 30 -90 41 -74 38 -122 35 -98 41 -96 40 -75 33 -112 46 -123 36 -79 39 -121 41 -112 30 -98 33 -117 38 -122 37 -122 47 -122 32 -111 36 -96 36 -75 39 -77

NAVIGATION, USER OPTIONS & PROGRAMMING

RT-200 Menu Options

When first powered up, the Legrand logo appears.

Standard display, aka: MAIN PAGE when the RT-200 is powered and running:

DST Tue 03/31/2020
12:04PM
PROG

Press and hold the button to see sunset, sunrise, software version and date:

DST Tue 03/31/2020
12:04PM
PROG

RISE TIME:
06:40
SET TIME:
19:34
VER: 2.0
Mar 31 2020

From the MAIN PAGE, press and release the button to enter SETUP menu.
DST Tue 03/31/2020
12:04PM
PROG

Press the button to move to desired SETUP function.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

NOTE: Once in SETUP menu, the button moves to the previous menu or decreases the value, the button moves to next menu or increases the value. The center button confirms the selected variable.

SET TIME AND DATE Setting the TIME

Press the center button to highlight TIME.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

01:00 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the center button to highlight the hour.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

01 : 00 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to decrease or
increase the hour.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 00 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Once the hour is set, press the center button to highlight minutes.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 00 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to decrease or
increase the
minutes.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Once time format is set, press the center button to save the setting.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Setting the DATE

Press the button to highlight DATE.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the center button to highlight the month.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 03/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to change
the month.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/31/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the center button to move to day.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to change the day.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the center button to move to year.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to change the year.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Once the DATE values are set, press the center button to save the setting.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Setting the DST (Daylight Savings Time)

Enter the DST start and end days.
NOTE: The unit is shipped with the correct DST start and end dates already programmed.

Press the button to move to highlight DST.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the center button to highlight ENABLED.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to choose ENABLED or
DISABLED.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Once DST is enabled or disabled, press the center button to save the setting.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

6

Setting the DST START DATE

Press the button to move to
highlight START.

Press the center button to move to Week in the month.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to choose the week.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 DISABLED 2nd Sun Mar 1st Sun Nov

PREVIOUS MENU

Once the week is selected, Press the center button to highlight month.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

01 : 00 am 04/01/20 ENABLED 2nd Sun Mar 1st Sun Nov

PREVIOUS MENU

Press the or the button to choose the month.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/20 ENABLED 2nd Sun Apr 1st Sun Nov

PREVIOUS MENU

Once the month is set, press the center button to save the setting.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/20 ENABLED 2nd Sun Apr 1st Sun Nov

PREVIOUS MENU

Setting the DST END DATE
Repeat the same process as setting the DST start date for setting the DST end date. Once the DST end date is set, press the button to highlight PREVIOUS menu. Press center button to return to the SETUP menu.

Location

Within the LOCATION menu you will be required to enter the local longitude/latitude coordinates and time zone. See pages 4 and 5 for

details on finding latitude and longitude.

Press the

Press the center Press the or

Once time zone

Setting the TIME ZONE Press the

center button to

button to highlight the button to

is set, press the

button to highlight highlight TIME

time zone values. decrease or

center button to

LOCATION.

ZONE.

increase the value. save the setting.

SETUP

LOCATION

SET TIME AND DATE
LOCATION
PREFERENCES
SCHEDULING HOLIDAY OFF
MAIN PAGE

TIME ZONE: -08 LONGITUDE: -121º LATITUDE: +37º
PREVIOUS MENU

TIME ZONE: -05 LONGITUDE: -121º LATITUDE: +37º
PREVIOUS MENU

Setting the LONGITUDE

Press the button to highlight LONGITUDE.
LOCATION
TIME ZONE: -05 LONGITUDE: -122º LATITUDE: +37º
PREVIOUS MENU

Press the center button to highlight Longitude values.
LOCATION
TIME ZONE: -05 LONGITUDE: -122º LATITUDE: +37º
PREVIOUS MENU

Press the or the button to decrease or increase the value.
LOCATION
TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +37º
PREVIOUS MENU

Once Longitude is set, press the center button to save the setting.
LOCATION
TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +37º
PREVIOUS MENU

Setting the LATITUDE

Press the button to highlight
LATITUDE.

Press the center button to highlight Latitude values.

LOCATION

TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +37º

PREVIOUS MENU

Press the or the button to decrease or increase the value.
LOCATION
TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +35º
PREVIOUS MENU

Once Latitude is set, press the center button to save the setting.
LOCATION
TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +35º
PREVIOUS MENU

Press the button to highlight PREVIOUS MENU.
LOCATION
TIME ZONE: -05 LONGITUDE: -81º LATITUDE: +35º
PREVIOUS MENU

Once PREVIOUS menu is highlighted press the center button to return to SETUP menu.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

Preferences
Setting the TIME FORMAT
Press the button to highlight PREFERENCES.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

Press the center button to highlight TIME FMT.
PREFERENCES TIME FMT: 12 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the center button to highlight the time setting.
PREFERENCES TIME FMT: 12 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the or the button to switch between 12 hours and 24 hours.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Once time format is set, press the center button to save the setting.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

7

Setting the DATE FORMAT
Press the button to highlight DATE FMT.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the center button to highlight date setting.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the or the button to choose the date setting. (MM/DD/YY or DD/MM/YY)
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Once date format is set, press the center button to save the setting.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Setting the SOUND
Press the button to highlight SOUND.

Press the center button to highlight ENABLED.

PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the or the button to choose ENABLED or DISABLED.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: DISABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Once sound preference is set, press the center button to save the setting.
LOCATION TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: DISABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Setting the FLASH
Press the button to highlight FLASH.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the center button to highlight DISABLED.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the or the button to choose ENABLED or DISABLED.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: DISABLED FLASH: ENABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Once flash preference is set, press the center button to save the setting.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: DISABLED FLASH: ENABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Setting the COUNTDOWN

Press the button to highlight
COUNTDOWN.

Press the center button to highlight 2 HOURs.

PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 2 HOURs PREVIOUS MENU

Press the or the button to choose a countdown value.
PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: DISABLED FLASH: ENABLED COUNTDOWN: 15 Min PREVIOUS MENU

Once countdown value is set, press the center button to save the setting.

Press the button to highlight
PREVIOUS MENU.

Once PREVIOUS MENU is highlighted press the center button to return to SETUP menu.

PREFERENCES TIME FMT: 24 HOURs DATE FMT: MM/DD/YY
SOUND: ENABLED FLASH: DISABLED COUNTDOWN: 15 Min PREVIOUS MENU

SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

Schedule

Setting the PROGRAM

There are 8 different programs that can be set.

Press the button to highlight
SCHEDULING.

Press the center button to enter the PROGRAM menu.

SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

SCHEDULING

PROGRAM:

1

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press the center button to highlight the program #.

SCHEDULING

PROGRAM:

1

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press the or the button to decrease or
increase program #.

Once the program is set, press the center button to save and edit the program.

SCHEDULING

PROGRAM:

2

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

SCHEDULING

PROGRAM:

2

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Setting the DAY(s)
This refers to the days of the week when the program will be initiated.
Options include: None, All, Mon Fri, Weekends, Sun, Mon, Tue, Wed, Thu, Fri, Sat.

Press the button to highlight
DAY(s)

SCHEDULING

PROGRAM:

2

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press the center button to highlight the day(s) options.

SCHEDULING

PROGRAM:

2

DAY(s):

None

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press the or the button to choose the day(s) options.

SCHEDULING

PROGRAM:

2

DAY(s):

Mon – Fri

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press center button to save the setting.

SCHEDULING

PROGRAM:

2

DAY(s):

Mon – Fri

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

8

Setting ON/OFF
This sets when the program will come on. The options for this setting are DUSK, DAWN, or TIME. The DAWN or DUSK option will program the number of minutes before or after dawn or dusk that program should take effect. Dusk and Dawn are based on the Longitude and Latitude settings. If you choose Time, then the time parameters are enabled.

Press the button to highlight ON.

SCHEDULING

PROGRAM:

2

DAY(s):

Mon – Fri

ON: DUSK OFF: DUSK

+00 Min

PREVIOUS MENU

Press the center button to highlight the DUSK options.

SCHEDULING

DAY(s):

Mon – Fri

ON: TIME

OFF: TIME

17: 30

24: 00

PREVIOUS MENU

Follow the same steps for setting the OFF options as you did for setting the ON options. The same process is used for setting the
DAWN and DUSK options that was used for setting the TIME option. Once the DST end date is set, press the button to highlight PREVIOUS menu. Press center button to return to the SETUP menu.

Holiday Off

Setting the HOLIDAY

There are 16 different memory locations for specifying holidays in which the loads will be turned Off.

Press the button to highlight
HOLIDAY OFF.

Press the center button to enter the HOLIDAY menu.

Press the center

Press the or the

button to highlight the button to decrease or

holiday #.

increase holiday #.

Once the program is set, press the center button to save and edit the holiday.

SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

HOLIDAY OFF HOLIDAY: #1
STATUS: ENABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Setting the STATUS
Each Holiday location can be enabled or disabled. If disabled, the memory location will retain the Date and duration settings but will not turn off the loads.

Press the button to highlight STATUS
HOLIDAY OFF HOLIDAY: #5
STATUS: DISABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the center button to highlight the status options.
HOLIDAY OFF HOLIDAY: #5
STATUS: DISABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the or the button to choose the status options.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press center button to save the setting.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Setting the START DATE

Press the button to highlight
STARTDATE.

Press the center button to highlight the month.

HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 01/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the or the button to change the month.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the center button to move to day.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/01/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the or the button to change the day.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the center button to move to year.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the or the button to change the year.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05 : 30 am 04/01/23 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

Once the STARTDATE values are set, press the center button to save the setting.

SET TIME AND DATE

TIME: DATE:
DST: START:
END:

05:30 am 04/01/23 ENABLED 1st Sun Mar 1st Sun Nov

PREVIOUS MENU

9

Setting the DURATION Select the number of days the holiday will last.

Press the button to highlight STATUS
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the center button to highlight the status options.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 1 Day(s)
PREVIOUS MENU

Press the or the button to choose the status options.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 2 Day(s)
PREVIOUS MENU

Press center button to save the setting.
HOLIDAY OFF HOLIDAY: #5
STATUS: ENABLED STARTDATE: 07/04/2023
DURATION: 2 Day(s)
PREVIOUS MENU

Navigating Back to the MAIN PAGE

Press the button to highlight PREVIOUS MENU.
HOLIDAY OFF
HOLIDAY: STATUS:
STARTDATE: DURATION:
PREVIOUS MENU

Press the center button to return to SETUP menu.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

Press the button to highlight MAIN PAGE.
SETUP
SET TIME AND DATE LOCATION
PREFERENCES SCHEDULING HOLIDAY OFF
MAIN PAGE

Press the center button to return to the MAIN PAGE.
DST Tue 04/01/2020
13:15
PROG

10

11

WARRANTY INFORMATION

INFORMATIONS RELATIVES À LA GARANTIE

INFORMACIÓN DE LA GARANTÍA

Wattstopper warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Wattstopper for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation.

Wattstopper garantit que ses produits sont exempts de défauts de matériaux et de fabrication pour une période de cinq (5) ans. Wattstopper ne peut être tenu responsable de tout dommage consécutif causé par ou lié à l’utilisation ou à la performance de ce produit ou tout autre dommage indirect lié à la perte de propriété, de revenus, ou de profits, ou aux coûts d’enlèvement, d’installation ou de réinstallation.

Wattstopper garantiza que sus productos están libres de defectos en materiales y mano de obra por un período de cinco (5) años. No existen obligaciones ni responsabilidades por parte de Wattstopper por daños consecuentes que se deriven o estén relacionados con el uso o el rendimiento de este producto u otros daños indirectos con respecto a la pérdida de propiedad, renta o ganancias, o al costo de extracción, instalación o reinstalación.

800.879.8585 www.legrand.us/wattstopper