MINISFORUM S100-WLP MINI PC User Manual

MINISFORUM S100-WLP MINI PC

Product Information

Specifications

• Product Model: MI NI PC S100-WLP
• Compliance: FCC RF exposure compliance requirements
• Antenna Separation Distance: At least 20 cm from all persons
• Usage: Mobile configurations

Product Usage Instructions

Installation

• Ensure that the antennas used for this transmitter are installed with a separation distance of at least 20 cm from all persons.

Operating Guidelines

• Do not co-locate or operate the antennas used in conjunction with any other antenna or transmitter to comply with FCC RF exposure compliance requirements.

FAQ

• Q: Can the MI NI PC S100-WLP be used in non-mobile configurations?
• A: No, to comply with FCC RF exposure compliance requirements, this product applies to only mobile configurations.
• Q: What is the minimum separation distance required for the antennas from all persons?
• A: The antennas must be installed to provide a separation distance of at least 20 cm from all persons.

Package Contents

Getting To Know Your Mini PC

Interfaces

Power Button

• The power button allows you to turn the Mini PC on /off. You can press the power button to put your Mini PC to sleep mode or press it for 10 seconds to force the shutdown of your Mini PC.

Reset Hole

• Please remove the power, press and hold the reset hole for ten sec­onds, and the BIOS will restore to the factory defaults.
• Important! If you encounter some problems during use, you can first try to solve them by pressing the reset hole.

USB-C Port

• Provide a transmission rate of up to 0.0 Gbps. It supports 4K@60 Hz display output as well as PD fast charging, 5Vl.SA peripheral charging, DP, and data 1/0.

USB3.2 Gen2 Port

• USB 3.2 Gen2 (Universal Serial Bus) port provides a transfer rate of up to 10 Gbit/s.lt and can be connected to keyboards, pointing devices, cam­eras, hard disks, printers and scanners.

Air Vent

• The air vents allow your Mini PC chassis to expel hot air out. Important! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions (such as Paper, books, clothes, and transmission lines ).

HDMI Port

• The HDMI port (High-Definition Multimedia Interface) is an uncom­pressed, fully digital audio/video interface that provides a common data connection channel for compatible devices, It can be used to connect external display devices and televisions.

Using Your Mini PC

Getting Started With Your Mini PC

1. Connect the display to the Mini PC’s HDMI port/ USB-C Port.
2. Connect the keyboard and mouse.
3. Connect the provided power adapter to your Mini PC.
4. Turn on the power and start the Mini PC.

Turn Off Your Mini PC

• If the Mini PC is frozen or slow to respond, press and hold the power button at least for 10 seconds to force it to shut down.

Putting Your Mini PC To Sleep

• To put your Mini PC on Sleep mode, press the Power button once.

Safety Information

• Read and follow all instructions in the documentation before you operate your system to ensure your safety.

Safety Precautions

1. Dust, moisture and drastic temperature changes will affect the product’s life, so please try to avoid placing the product in these places.
2. The suitable temperature for the Notebook PC and accessories is 0°c ~ 35°C.
3. Before you use this product, make sure you leave enough space around the system for ventilation. Please don’t block or cover these openings. Never insert objects of any kind into the ventilation openings.
4. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
5. When you use the power extension cords, the total current of all connected products should be within the rated current of cables, ensuring stable opera­tion.

Maintenance Guideline

1. Do not step on the power cord or put anything on your Mini PC.
2. Do not spill water or any other liquid over this product.
3. There’s still some current passing through even when the system is off. To avoid severe damage caused by possible electric shock, plug out all power cables from sockets temporarily before cleaning or moving this product.
4. If you encounter the following technical problems with the product unplug the power cord and contact a qualified service technician or your retailer.

• It is recommended that you install or upgrade the memory modules, wireless card, and solid-state drive (55D), under professional supervision.
• The start-up speed may be slow in the following situations: unexpected restart, BIOS reset, memory bank replacement, and 55D replacement. Gener­ally speaking, the start-up speed will return to normal after one successful power-on and power-off process.
• The core graphics card will occupy a part of the memory as a GPU-specific mem­ory.

TIPS

• A slow boot time may be caused by:
• An unexpected reboot, a BIOS reset, RAM replacement, or SSD replacement. In general, the boot time will resume after one normal reboot.

NOTE

• The power adapter and other accessories included in the box will vary depending on the model parameter or are purchased. Here you need to change it to this.

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received ed, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interfe rence to radio communications. However, there is no guarantee that interference will not occur in a partic ular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help with important announcements.

Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant applies to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Copyright @ 2022 Micro Computer (HK) Tech Limited.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>