NITECORE Emargency Electronic Whistle User Manual

June 7, 2024
Nitecore

NITECORE Emargency Electronic Whistle User Manual

Features

  • Emergency Electronic Whistle with a buzzing output of 120dB
  • Omnidirectional sound diffraction system
  • Smart sensor beacon flashing automatically in the dark with a brightness output of 2,000 lumens
  • Utilizes 4 x Luminus SST-20-W LEDs with a cylindrical PC diffuser to emit 360° beacon flashing
  • Powered by 1 x CR123A battery with a max runtime of 72 hours
  • Ultra compact, lightweight and durable design with a simple user interface
  • Rating in accordance with IP68 (2 meters submersible)
  • Impact resistant to 1 meter

Specifications

Diameter 25mm (0.98”)
Height 67mm (2.64”)
Weight 35 (1.23oz)

Accessories

Key Clasp, Spare O-ring, CR123A Battery

Battery Options

  Type Norminal Voltage Compatibility
Primary Lithium Battery CR123A 3V Y (Recommended)
Rechargeable Li-ion Battery RCR123A 3.6V/3.7V Y (Recommended

Battery Installation

Operating Instructions

  1. Battery Installation Insert the battery with the negative end towards the spring.
  2.  Activating the Whistle The NWE30 has a twist-and-buzz interface. Tighten the tail cap to turn it off and loosen the tail cap to turn it on. When it is on, it will buzz once every 10 seconds. (It is normal that the product starts working once the tail cap is in contact with the battery.)

Warnings:

  1. . Due to the loud buzzing of 120dB and the beacon flashing of 2,000 lumens, it is recommended to cover the PC shell with the hand to avoid getting startled before tightening the tail cap.
  2. Ensure the battery is inserted with the negative end towards the spring. The product will not work if the battery is incorrectly inserted.
  3. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
  4. Please DO NOT put it close to the ears to avoid harm to the hearing when the product is working.
  5. The standby time is approx. 6 months when a 1,600mAh CR123A battery is inserted.

Smart Sensor Beacon Flashing

The NWE30 has a smart sensor beacon flashing function. When it is turned on in the dark, it will automatically activate the beacon flashing and cycle through the following modes: “Buzzing ­ Off ­ Beacon Flashing ­ Off ­ Beacon Flashing ­ Off”

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECORE® products can be repaired free of charge for a period of 12 months (1 year) from the date of purchase. Beyond 12 months (1 year), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified if the product(s) is/are:

  1.  broken down, reconstructed and/or modified by unauthorized parties
  2. damaged from wrong operations (i.e. reverse polarity installation)
  3. damaged by batteries leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com.

All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore. com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Worldwide Warranty Service

Model Number|
---|---
Date of Purchase|
Serial Number|
Store Stamp|

This is the certificate of authenticity if this item and we confirm that it has been subjected to the most exacting quality controls by SYSMAX Innovations Co., Ltd.

NOTE:
Please ensure this warranty card is fully completed by the distributor or retailer after purchasing the product. Should the product fail to operate correctly during the warranty period, it may be returned with the completed warranty card and original sales receipt to the retailer or local distributor for replacement or repair.
Customer Service Email: service@nitecore.com

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou, 510623, Guangdong, China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals