dji Mavic Pro Quadcopter with Remote Controller User Guide

dji Mavic Pro Quadcopter with Remote Controller User Guide

Aircraft

The DJITM MAVICTM Pro is DJI’s smallest flying camera, featuring a fully stabilized camera, Intelligent Flight Modes and Obstacle Avoidance inside a revolutionary folding design. It captures 4K videos and 12 megapixel photos, and is capable of both ActiveTrackTM and TapFlyTM making complex shots effortless.
Mavic Pro boasts a maximum flight speed of 40 mph (65 kph) and a maximum flight time of 27 minutes*.

1. Gimbal and Camera
2. Downward Vision System
3. Forward Vision System**
4. Micro USB Port
5. Motors
6. Front LEDs
7. Propellers
8. Antennas
9. Link Button
10. Linking Status Indicator
11. Camera Micro SD Card Slot
12. Control Mode Switch
13. Intelligent Flight Battery
14. Battery Level LEDs
15. Power Button
16. Aircraft Status Indicator

• Maximum flight time was tested in 0 wind at a consistent 5 mph (25 kph). This value should be taken for reference only.

• The Forward Vision System is affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorial in the DJI GOTM 4 app or on the Official DJI website to learn more. http://www.dji.com/mavic

Remote Controller

Built into the Remote Controller is DJI’s latest long-range transmission technology OCUSYNCTM, offering a maximum transmission range of 4.3 mi (7 km). An on-board LCD screen keeps you updated on aircraft data, and video from the aircraft to the DJI GO 4 app on your mobile device at up to 1080p at close range, and 720p at longer ranges.
The Mavic Pro can also be flown by phone only. Maximum run-time: 2.5 hours*

1. LCD Screen

2. 5D Button

3. Control Sticks

4. Antennas

5. Power Button

6. Flight Mode Switch

7. Mobile Device Clamp

8. USB Port

9. Flight Pause Button

10. RTH Button
    

11. Gimbal Dial

12. Camera Settings Dial

13. Record Button

14. Shutter Button

15. Power Port (Micro USB)

16. C1 Button (customizable)

17. C2 Button (customizable)

• The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic Interference, and at an altitude of about 400 feet (120 meters). The maximum run-time is tested under laboratory environment, only for your reference.

Specifications

• Aircraft
  Weight                                             1.62 lbs (734 g)
  Weight (including gimbal cover)1.64 lbs (743 g)
  Max Ascent Speed                          16.4 ft/s (5 m/s) in Sport Mode Max Descent Speed           9.8 ft/s (3 m/s)
  Max Speed                                      40 mph (65 kph) in Sport Mode without wind
  Max Service Ceiling Above
  Sea Level                                        16404 feet (5000 m)
  Max Flight Time                             27 minutes (0 wind at a consistent 15.5 mph (25 kph))
  Max Hovering Time                       24 minutes (0 wind)
  Max Flight Distance                       8 mi (13 km, 0 wind)
  Operating Temperature                  32° to 104° F (0° to 40° C) Satellite Positioning Systems   GPS/GLONASS
  

• Gimbal
  Controllable Range                         Pitch: -90° to +30°, Roll: 0°or 90° (Horizontally and vertically)

• Forward Vision System
  Sensing Range                                 Precision measurement range: 2 ft (0.7 m) to 49 ft (15 m)
  Detectable range:                            49 ft (15 m) to 98 ft (30 m)
  Operating Environment                  Surfaces with clear patterns and adequate lighting (lux > 15)

• Downward Vision System
  Velocity Range                               ≤ 22.4 mph (36 kph) at 6.6 ft (2 m) above ground
  Altitude Range                               1 – 43 feet (0.3 – 13 m)
  Operating Range                            1 – 43 feet (0.3 – 13 m)
  Operating Environment                 Surfaces with a clear patterns and adequate lighting (lux > 15)
  Velocity Range                               ≤ 22.4 mph (36 kph) at 6.6 ft (2 m) above ground
  Altitude Range                                1 – 43 feet (0.3 – 13 m)
  Operating Range                             1 – 43 feet (0.3 – 13 m)
  Operating Environment                  Surfaces with a clear patterns and adequate lighting (lux > 15)

• Camera
  Sensor                                            1/2.3” CMOS Effective pixels:12.35 Megapixels (Total pixels: 12.71 M)
  Lens                                               78.8° FOV, 28 mm (35 mm format equivalent) f/2.2 Distortion <1.5% Focus from 0.5 m to ∞
  ISO Range                                     100 – 3200 (video), 100 – 1600 (photo) Electronic Shutter Speed                    8 s to 1/8000 s
  Max Image Size                              4000×3000
  Still Photography Modes                Single shot
  Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB):
  3/5 bracketed frames at 0.7EV Bias Interval HDR

• Video Recording Modes       C4K: 4096×2160 24p, 4K: 3840×2160 24/25/30p 2.7K: 2720×1530 24/25/30p FHD: 1920×1080 24/25/30/48/50/60/96p HD:  1280×720 24/25/30/48/50/60/120p
  Video Storage Bitrate                       60 Mbps
  Supported File Systems                    FAT32 (≤ 32 GB), exFAT (> 32 GB) Photo  JPEG, DNG
  Video                                               MP4, MOV (MPEG-4 AVC/H.264)
  Supported SD Cards                        microSDTM. Max capacity: 64 GB Class 10 or UHS-1 rating required

• Remote Controller
  Operating Frequency                        2.4 GHz to 2.4835 GHz Max Transmission Distance  FCC Compliant: 4.3 mi (7 km); CE Compliant: 2.5 mi (4 km) Unobstructed and free of interference.
  Operating Temperature                    32° to 104° F (0° to 40° C)
  Battery                                              2970 mAh
  Transmitter Power (avg. EIRP) FCC: ≤ 26 dBm; CE: ≤ 20 dBm Operating Voltage 950 mA @ 3.7 V Supported Mobile Device Size Thickness supported: 6.5 – 8.5 mm, Max length: 160 mm Supported USB port types: Lightning, Micro USB (Type-B), USB Type-CTM

• Charger
  Voltage                                             13.05 V
  Rated Power                                     50 W

• Intelligent Flight Battery
  Capacity                                            3830 mAh

Voltage                                              11.4 V

Battery Type                                      LiPo 3S

Energy                                               43.6 Wh

Net Weight                                         Approx. 0.5 lbs (240 g) Charging Temperature Range 41° to 104° F (5° to 40° C) Max Charging Power 100 W

2. Check the Battery Levels

Press once to check the                              Press once to check the battery level on
battery level. Press once, _ then                    LCD screen. Press once, then again and
again and hold to turn _on/off.                  hold to turn on/off the remote controller

2. Charge the Batteries

4. Prepare the Remote Controller

• Choose an appropriate RC Do not twist the RC cable.
• The RC cable slider must be replaced if using a USB Type-C RC Refer to the User Manual for RC Cable connection.

5. Prepare the Aircraft

• Unfold the front arms and the propellers before the rear All arms and propellers must be unfolded before takeoff.
• The gimbal cover is used to protect the gimbal. Remove it when necessary

6. Prepare for Takeoff

Use your DJI account to activate the aircraft. Activation requires an internet Internet connection

• The Mavic Pro can be controlled using the Remote Controller or Virtual Joysticks. Select control modes by toggling the Control Mode Switch. Only toggle this switch when the aircraft is powered off

7. Flight

The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.

Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app or on the Remote Controller LCD screen displays ‘Ready to Go’.

• The motors can only be stopped mid-flight when the flight controller detects critical error.

Controlling flight with Virtual Joysticks on your mobile device via Wi-Fi

1. Toggle the Control Mode Switch to turn on Wi-Fi
2. Power on the aircraft
3. Launch the DJI GO 4 app and tap the icon on the top right of your screen, then scan the Wi-Fi QR Code on the front arm to start connection
4. Tap Auto Takeoff
5. Fly the aircraft with touch control

• Turn on your mobile device’s Wi-Fi and enter the Wi-Fi password shown on the front arm to connect to the Mavic network if for any reason you cannot scan the QR
• When using Wi-Fi in a wide open area with no Electro-Magnetic Interference, transmission distance is approximately 262 ft (80 m) at an altitude of 164 ft (50 m)
•  The Wi-Fi frequency of your mobile device can be set to 4 Ghz or 5 Ghz. Set your Wi-Fi to 5 Ghz for less interference. Once connected to the Mavic Pro, you can change your Wi-Fi password or reset your Wi-Fi connection. (Refer to the User Manual for more information)

In the DJI GO 4 App

• Watch the tutorial in the DJI GO 4 app or on the Official DJI website to learn more.
• Always set an appropriate RTH altitude before When the aircraft is returning to the Home Point, you should guide it with the control sticks.

8. Fly Safe

Avoid flying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.

DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass.

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and wind speeds exceeding 10 m/s or 22 mph.

It’s important to understand basic flight guidelines, for the safety of both you and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>