Royalcraft Seychelles Set-Chair Instruction Manual
- June 7, 2024
- Royalcraft
Table of Contents
Seychelles Set-Chair
Assembly Instructions
Product size:
W63D63H79.5 cm
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Before you start
This product doesn’t need any assembly work.
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
See enclosed instructions for safety and care information. Failure to follow
the warnings could result in serious injury. Handle heavy parts with care.
This product is intended for Domestic Use only.
This product should only be used on firm, level ground. Ensure the product is
always placed on level ground.
Furniture can be dangerous if used incorrectly or maintained poorly. Keep your
furniture in a good condition at all times. No liability will be accepted for
damage or injury caused by failure to follow the the care and maintenance
guidelines.
Dos
Unwrap ail packaging materials and place the components on suitable surface to
prevent scratching your product.
We recommend the use of furniture covers to protect your product when not in
use.
During bad weather or in winter months, the product should be stored in a
cool, dry place. Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and wipe with a clean,
dry cloth.
This product is suitable for all year outdoor use, but we recommend that a
furniture cover be used to add additional protection to your product when not
in use.
PLEASE NOTE -All cushions should be stored indoors after use. The
cushions are not waterproof. To clean the chairs or sofa, a pressure washer or
jet wash on a wide spray can be used at a minimum distance of lm from the
product. Do not aim this directl at the joints of the furniture. Alternatively
it can simply be wiped down by hand with a damp sponge and a weak solution of
soap and water.
The feet on our all-weather wicker products are made from recycled PE
materials. We would however still recommend lifting the products to move the
items instead of dragging them which may cause some damage to either the
product or the area in which you choose to use them.
Don’ts
Never drag furniture when moving it, always lift it. Never tilt the product
during use. Do not stand or climb onto the product. Do not sit or lean onto
the arms/rims of this product. Never use scourers, abrasives or chemical
cleaner.
Do not use this product as a ladder as this could lead t unbalance and
overturning.
Use Instruction
Ensure the product is always placed on level ground. We recommend that the cushions are stored indoors or under waterproof cover in wet weather.
Never tilt the product during use. Ensure product is always placed firmly on
the ground.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Product Size:
Dia 121.5*H80 cm
This product is for Domestic Use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
See enclosed instructions far assembly, safety and care information. Failure
to follow the warnings could result in serious injury. Handle heavy parts with
care, Ensure that this product is fully assembled as illustrated before use.
his product should only be used on firm, level ground. Keep small parts out of
reach of children. Co not stand or climb onto this product. This product is
intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be accepted
for damage or injury caused by incorrect use of this product.
Dos
When you are ready to start, make sure that you have the right tools,
plenty of space, and a dean, dry area for assembly.
Removing all packaging and banding and place the components carefully on
suitable surfaces to prevent damaging or scratching them.
Check the pack and make sure you have all of the parts listed. Check all
screws and bolts are tightened and inspect regularly. This product is suitable
for all year outdoor use.
However to prolong its life we recommend that during severely bad weather and
during the winter months, it is stored in a cool, dry place. Before storage,
ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and wipe with a clean,
dry cloth. sponge and warm soapy water and wipe with a clean, dry cloth.
Do not use scourers, abrasives, washing powders, chemical cleaners or any
other substances containing abrasives since these substances can damage the
product, including the glass panel.
Do not place very hot or very cold items on the glass surface unless
adequately thick table-mats are used to prevent such items from coming into
contact with the glass.
Do not use the glass as a chopping surface. Do not strike the glass with hard
or pointed items. Do not use power tools to construct this product. Do not use
this product if parts are missing, damaged or worn. Do not sit or lean on this
product. Do not stand or climb onto the product and do not use A as a ladder,
as this could lead to it unbalancing and overturning. Never drag furniture
when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
15 Minutes
Tools required
Tips:
Do NOT fully tighten bolts before all components are connected. Only fully
tighten once you are satisfied with the alignment of all components. Do not
over-tighten the bolts.
Components, fixtures & fittings (not actual size)
Parts List
Step by step assembly instructions
All Bolt Head Caps should not be attached before finally tightening all Bolts with Spanner.
Step One
Open the packaging, leave the glass on the carton until the rest of the table
is fully assembled.1 With the help of another person, place Table Top Frame
(A) upside down on a flat, non-abrasive surface to avoid scratching the table
surface or rim.
Step Two
Do NOT assemble the Legs (B) to the Table Top Frame (A) while it is still resting on the Glass Top (D). Loosely attach the Table Legs (B) to the Table Top Frame (A) using Bolt Head Caps (F2), Bolts (W20), and Flat Washers (F3).
Step Three
Loosely attach the Connecting Cross (C) between the Table Legs (B) using Bolt Head Caps (F2), Bolts (W20), and Flat Washers (F3). Only tighten the bolts when all bolts and washers are in place. Once you are satisfied with the alignment of the components carefully tighten all bolts using Spanner (S1). Do not over-tighten. Cover each bolt with Bolt Head Cap (F2).
Step Four
With the help of another person, carefully turn the table in the upright
position. Level the table by adjustable feet screw. Carefully place the Glass
Top (0) on the Table Top Frame (A) and make sure it is fully rested inside the
frame. Your table is now ready for use.
PLEASE KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE
www.royalcraft.co.uk
Produced in China for A.Mir & Co. Ltd.
©A.Mir & Co.Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>