Royalcraft Kingston 6 Seat Set with Lazy Susan-Table Instructions
- June 7, 2024
- Royalcraft
Table of Contents
Kingston 6 Seat Set with Lazy Susan-Table
Assembly Instructions
*Product size: D150.5H73.5 cm
All diagrams are for assembly reference only.**
This product is for Domestic use only!
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE READ CAREFULLY
See enclosed instructions for assembly, safety, and care information. Failure
to follow the warnings could result in serious injury. Handle heavy parts with
care. Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground. Keep small parts out
of reach of children. Do not stand or climb onto this product. This product is
intended for domestic use only.
Furniture can be dangerous if incorrectly used. No liability will be accepted
for damage or injury caused by the incorrect use of this product.
Dos
When you are ready to start, make sure that you have the right tools, plenty
of space, and a clean, dry area for assembly. Removing all packaging and
banding and place the components carefully on suitable surfaces to prevent
damaging or scratching them. Check the pack and make sure you have all of the
parts listed. Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all-year outdoor use. However to prolong its life
we recommend that during severely bad weather and during the winter months, it
is stored in a cool, dry place. Before storage, ensure that the product is
clean and dry. To clean, wipe down with a sponge and warm soapy water and wipe
with a clean, dry cloth. sponge and warm soapy water and wipe with a clean,
dry cloth.
Don’ts
Do not use scourers, abrasives, washing powders, chemical cleaners or any
other substances containing abrasives since these substances can damage the
product.Do not use power tools to construct this product. Do not use this
product if parts are missing, damaged or worn. Do not sit or lean on this
product. Do not stand or climb onto the product and do not use it as a ladder,
as this could lead to it unbalancing and overturning. Never drag furniture
when moving it, always lift it.
Number of people required for assembly
Two people
Time to assemble
30 Minutes
Tools required
Tips: Do NOT fully tighten bolts/nuts before all components are connected. Only fully tighten once you are satisfied with the alignment of all components. Do not over-tighten the bolts.
Components, fixtures & fittings (not actual size)
Parts List
Part No.
| Diagram| Qty.| Part No.| Diagram|
Qty.
---|---|---|---|---|---
A|
Table Top| 1 PC| B|
Table Leg| 4 PCS
C|
Connecting Panel| 4 PCS| D|
Bolt| 4 PCS
F3|
Flat Washer| 12 PCS| F4|
Spring Washer| 12 PCS
G|
Nut| 12 PCS| F2|
Bolt/Nut Cap| 12 PCS
S1|
Spanner| 1 PC| | |
Step by step assembly instructions
All Bolt Head/Nut Caps should not be attached before finally tightening all
Bolts/Nuts with Spanner.
Step One
With the help of another person, open the packaging and place the Table Top
(A) upside down on a flat, non-abrasive surface to avoid scratching the table
surface or rim.
Step Two
Screw the Bolts (D) into the holes, tighten them using Screw Driver (not
provided).
Step Three
Loosely attach the Table Legs (B) to the Table Top (A) using Nut Caps (F2),
Nuts (G), Spring Washers (F4) and Flat Washers (F3).
Step Four
Loosely attach the Connecting Panels (C) to the Legs (B) using Nut Caps (F2),
Nuts (G), Spring Washers (F4) and Flat Washers (F3).
Step Five
Once you are satisfied with the alignment of the components carefully tighten
all Bolts/Nuts using Spanner (S1). Do not over-tighten. Cover each Bolt/Nut
with Cap (F2). With the help of another person, carefully turn the table in
the upright position. Level the table by adjustable feet screws. Your table is
now ready for use.
Note : Always use a suitable base weight when using a parasol with this
table.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
www.royalcraft.co.uk