MSR ELIXIR 3 Instructions
- June 7, 2024
- MSR
Table of Contents
81-245-2
ELIXIR™ 3
Assembly Instructions
PACKAGE INCLUDES:
Frame assembly, tent body, rainfly, stakes, MSR® Footprint
1 PREPARE FOR SETUP
- Spread tent out and stake out four corners tightly.
- Assemble poles.
2 ASSEMBLE TENT
- Insert each red pole tip of main poles into grommets on the stake loops with red webbing.
- Insert each gray pole tip of main poles into grommets on the stake loops with gray webbing.
- Attach color-coded clips to like-color pole along entire length of frame assembly.
3 ATTACH RIDGE POLE
- Insert red ridge pole into grommets above doors, making sure ridge pole rests on top of main poles.
4 ATTACH RAINFLY
- Lay rainfly over tent. Attach rainfly’s midpoint grommets to ridge pole.
- Clip and tighten all buckles at all stake loops, connecting red webbing with red stake loops, gray webbing with gray stake loops.
- Stretch out vestibules until taut and stake down, making sure seams align with frame.
USE TIPS: All tents require staking; unsecured tents are susceptible to wind damage. In some conditions, additional stakes and cord may be required. Re-adjustment of stakes and rainfly may be necessary to keep tent tight and weatherproof. For complete care and use instructions, refer to the Owner’s Manual (available at www.msrgear.com/Elixir3).
© 2016 Cascade Designs, Inc.
4000 First Avenue South
Seattle, WA 98134 USA
1-800-531-9531
1-206-505-9500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>