MI Air Purifier 2 User Guide
- June 7, 2024
- Mi
Table of Contents
MI Air Purifier 2
Product Overview
Important Safety Instructions
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Installation & Usage
App Download
Search for “Mi Smart Home” in the App Store or scan the QR code.
Note: If you are unable to connect your phone to the air purifier, please see “Maintenance > Resetting the Wi-Fi module” .
Operation
-
Open filter door: Press to open filter housing door and make sure the filter is correctly installed.
-
Take out power cord: Take out the power cord and close filter housing door
The cable shown here is indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. -
Connect to power connector: Connect power cord to power connector at bottom of unit, then connect power cord to an electrical socket.
Use Instructions
On/Off and Mode Switch: Press power/mode switch button once to turn on
and to switch modes, press and hold for two seconds to turn off.
Light Switch: Press light switch/filter reset button on the back of the
unit to adjust light brightness. Brightness status are: strong, soft and off.
Air Quality Indicator: A green, orange or red light indicates current air
quality.
Maintenance
Notes
Please make sure to turn off the air purifier and disconnect power before replacing filters cleaning the filter housing or the dust sensor.
Filter should be replaced every 3- 6 months. When it is time, filter replacement indicator light will blink red for 30 seconds when unit is turned on.
When the filter reaches saturation absorption of harmful gases, there may be odor. Please place the filter in a sunny and ventilated place to eliminate odor.
Cleaning Filter Housing: To ensure optimum operation, use a vacuum
cleaner or soft cloth to remove any dust clinging to air holes or housing
walls.
Cleaning Dust Sensor: 1. Dust sensor’s back cover is at the top of
filter housing. Lift to open the back cover.
2. It is suggested to use a dry cotton swab and gently wipe the dust
adhering to the sensor every half year.
Replacing Filters: 1. Please refer to the “Filter Replacement” label on
the back of filter housing door for detailed instructions.
2. After filter has been replaced, turn the unit on and press and hold
the rear button for 6 seconds. A beeping sound indicates that the filter has
been
successfully replaced, and the filter replacement timer will then be reset.
Resetting Wi-Fi Module: If you are unable to connect your phone to the
air purifier, press and hold the mode switch button and light switch button
simultaneously for 5 seconds. A beeping sound indicates that Wi-Fi has been
successfully reset.
TROUBLESHOOT
Problem
| Unable to turn power on| Excessive noise during operation| Ineffective purification|
Air quality indicator light displays an error
---|---|---|---|---
Confirm the following
|
- Rear filter replacement door is properly installed;
- Power cord is properly connected
|
- Check that filter is installed;
- Filter packaging has been removed
|
- Check that filter is installed;
- Filter element packaging has been removed;
- Filter is securely fastened in place
|
- Check if dust sensor operation is impeded by excessive dust
Note: Please refer to “Maintenance – Cleaning Dust Senor” for detailed instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>