dji PHANTOM 4 Pro V2.0 User Guide

dji PHANTOM 4 Pro V2.0 User Guide

Phantom 4 Pro+ V2.0

The DJI PHANTOM 4 Pro+ V2.0 is a smart prosumer flying camera capable of shooting 4K video at 60 fps and at up to 100 Mbps, and capturing 20 megapixel stills. 4 directions of obstacle avoidance allow it to intelligently avoid obstacles during flight. Using TapFly and Active Track through the DJI GO 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images.
In addition to the above features, improved propulsion system efficiency means aircraft noise is 4dB (60%) lower than on the Phantom 4 Pro+ V2.0.

1. Gimbal and Camera
2. Downward Vision System
3. Micro USB Port
4. Camera/Linking Status Indicator and Link Button
5. Camera Micro SD Card Slot
6. Forward Vision System
7. Infrared Sensing System
8. Front LEDs
9. Motors
10. Propellers
11. Aircraft Status Indicators
12. Antennas
13. Rear Vision System
14. Intelligent Flight Battery
15. Power Button
16. Battery Level Indicators

• The Vision and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorials in the DJI GO 4 app or on the official DJI website to learn more. http://www.dji.com/phantom-4-pro-v2.

Remote Controller

The powerful remote controller of the Phantom 4 Pro+ V2.0 has a transmission range extending up to 5 mi (8 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture, and video recording. Built into the remote controller is DJI’s latest long-range transmission technology OCUSYNC, providing a live HD view from the Phantom’s camera directly on the display. Dual frequency support makes the HD video downlink more stable.

1. 1. Power Button
2. Return-to-Home (RTH) Button
3. Control Sticks
4. Speaker
5. Status LED
6. Battery Level LEDs
7. Power Port
8. Display Screen
9. Sleep/Wake Button
10. Microphone
11. Antennas
12. Handle Bar
13. Gimbal Dial
14. Camera Settings Dial
15. Record Button
16. Flight Mode Switch
17. Shutter Button
18. Intelligent Flight Pause
19. C1 and C2 Buttons (customizable)
20. Micro USB Port
21. HDMI Port
22. Micro SD Card Slot
23. USB Port

The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt.

• The remote controller is able to reach its maximum transmission distance (FCC) in a wide open area with no Electromagnetic Interference, and at an altitude of about 400 feet (120 meters).

Using Phantom 4 Pro+ V2.0

1. Watch the Tutorial Videos
   Watch the tutorial videos at www.dji.com or in the DJI GO 4 app.
   
   Tutorial Video

2. Check the Battery Levels
   
   
   Press once to check the battery level. Press once, then again and hold to turn on/off.

3. Charge the Batteries
   

When charging is complete, the battery level indicators will automatically turn off.

4. Prepare the Remote Controller

5. Prepare for Takeoff
   
   First-time activation requires your DJI account and internet connection.

Black propeller rings go on motors with black dots.

Silver propeller rings go on motors without black dots.

Press the propeller down onto the mounting plate and rotate in the lock direction until secure.

Check that the propellers are secure before each flight.

6. Flight
   Ready to Go (GPS)
   Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates Ready to Go (GPS)’ orReady to Go (Vision)’ if flying indoors.

In the DJI GO 4 App:
Auto Takeoff The aircraft will take off and hover at an altitude of 4 feet (1.2 meters).

Auto Landing
The aircraft will land vertically and stop its motors.

Return-to-Home (RTH)
Bring the aircraft back to the Home Point. Tap again to stop the procedure.

Normal
You are in control of the Phantom, with satellite and Return-to-Home support.

TapFly
Tap on your screen to fly your Phantom in that direction, avoiding obstacles as it flies.

ActiveTrack
Mark an object on your screen to track it as it moves.

• Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
• Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should
  guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.

Manual Takeoff

Manual Landing

Left stick down (slowly) until you touch the ground. Hold a few seconds to stop the motors.

• Rotating propellers can be dangerous. Do not start the motors when there are people nearby.
• Always keep your hands on the remote controller so long as the motor is still spinning.
• Stop motor mid-flight: Pull the left stick to the bottom inside corner while simultaneously pressing the RTH button. Only stop motors mid-flight in emergency situations when doing so can reduce the risk of damage or injury. Refer to the user manual for details.

It’s important to understand basic flight guidelines, for the safety of both and those around you. Don’t forget to read the Disclaimer and Safety Guidelines.

Specifications

Aircraft

Weight (Battery & Propellers Included)| 1375 g
Max Ascent Speed| S-mode: 6m/s; P-mode: 5 m/s
Max Descent Speed| S-mode: 4m/s; P-mode: 3m/s
Max Speed| 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode)
Max Service Celling Above sea level| 19685 ft (6000 m)
Max Flight Time| Approx 30 Minutes
Operating Temperature| 32o to 104o F (0o to 40oC)
GNSS| GPS + GLONASS
Operating Frequency| 2.400-2.483 GHz and 5.725-5.850 GHZ
Transmitter Power (EIRP)| 2.4 GHZ: <26 dBm (FCC); <20 dBm (CE); <20 dBm (SRRC)

5.8 GHZ: <26 dBm (FCC); <14 dBm (CE) <26 dBm (SRRC)

Hoever Accuracy Range| Vertical + 0.1 m (with vision positioning); 0.5 m (with GPS Positioning)
Horizontal: +0.3 m (with vision positioning) +1.5 m (with GPS Positioning).

Gimbal

Controllable Range| Pitch -90o to + 30o

Vision System

Velocity Range| <31 mph (50 kph) at 6.6 ft (2m) above ground
Altitude Range| 0-33 ft (0-10 m)
Operating Range| 0-33 ft (0-10 m)
Obstacle Sensory Range| 2-98 ft (0.7-30 m)
Operating Environment| Surfaces with clear patterns and adequate lighting (> 15 lux)

Infrared Sensing System

Obstacle sensory Range| 0.6-23 ft (0.2-7m)
Operating Environment| Surface with diffuse reflection material and reflective

8% (such as wall, trees, humans etc(

Camera

Sensor| 1” CMOS, Effective pixels: 20m
Lens| FOV (Field of View) 84”, 8.8mm (35 mm format equivalent: 24mm) f2.8-f/11 auto focus at 1 m video 100-3200 (Auto) 100-6400 (Manual) Photo 100-3200 (Auto); 100-12800 (Manual)
ISO Range| Video: 100-3200 (Auto); 100-6400 (Manual) Photo 100-3200 (Auto) 100-12800 (Manual)
Mechanical Shutter| 8-1/2000 s
Electronic Shutter| 8-1/8000 s
Max Image size| 3.2 Aspect Ratio: 5472 x 3648 Aspect Ratio 4864 x 3648; 16.9 Aspect Ratio 5472 x 30 .78
Still Photography modes| Single Shot
Video Recording Modes| H265
Video Storage Bitrate| 100 Mbps
Supported File Systems| FAT32
Photo| JPEG, RAW
Video| MP4/MOV
Supported SD Cards| Mixro SD Max Capacity

Remote Controller

Operating Frequency| 2.400-2.483 GHZ and 5.725, 5.850 GHZ
Battery| 6000 mAh Lipo
Operating Voltage| 1.2A @ 7.4 V

Charger

Voltage| 17.4 V
Rated Power| 100 W
Intelligent Flight Battery (PH4-5870 mAh-15.2V)
Capacity| 5870 mAh
Voltage| 15.2 v
Battery Type| Lipo 4S
Energy| 89.2 wh
Net weight| 468 g
Max Charging Power| 100 W

For More Information, read the user Manual:
http://www.dji.com/phantom-4-prov.v2. 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>