MI Air Purifier Pro User Manual

: June 7, 2024
: Mi

Table of Contents

WARNING
Precautions
Product Overview
Instructions
How to use
Maintenance
Specification
Regulatory Compliance Information
Documents / Resources

MI Air Purifier Pro

WARNING

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.
When the power cord is damaged, it must be replaced with a genuine power cord purchased from the manufacturer or after-sales service department.

Precautions

Turn off and unplug the purifier before moving it.
The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly.
Maintain a distance of at least 20 cm between the air inlets and walls or other objects.
Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth.
Remove dust, hair, and particles from the purifier’s air inlets to prevent a reduction of air intake.
Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a long time.

To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:

Do not excessively pull, twist or bend the power cord, as this may expose or break the cord’s core.
The power cord must be plugged into a suitable electrical outlet.
Use the power cord that was provided with the purifier, do not use any third party power cords.
Always unplug the purifier before carrying out maintenance to or moving the air purifier.
Immediately stop using the purifier when it makes unusual sounds, gives off bad odors, overheats, or its fan rotates irregularly.
Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.
Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.
Do not sit on, lean on or tilt the purifier.
When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate sufficiently to avoid carbon monoxide poisoning.
Do not pour liquids, nor throw powders or other small substances into the purifier’s air outlet.

Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:

Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, multi-purpose torches, candle lighters, or fire pans.
Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers, electric stoves, electric irons.
Make sure no inflammable objects get into the purifier.
In unstable locations where the purifier can easily fall over.
In environments that are extremely hot, humid, or damp, such as bathrooms.

Product Overview

diagram

Instructions

To unsure a better purification, maintain a certain distance between the air inlets and walls or other objects.
diagram
Note: It is recommended to close your doors and windows during the purification.

Connect the power cord

Open the filter compartment panel
Take out the power cord
Connect the power cord

How to use

Power/Mode Button
Press the power/mode button to turn on the purifier, and to switch modes. Press and hold for two seconds to turn off the purifier.

Screen On-off Button
Press the screen on-off button at the back of the purifier to turn the screen on/off.

Screen Display
Information is displayed on the screen of your purifier.
diagram

Resetting the Wi-Fi
If your phone is unable to connect to the air purifier, simultaneously press and hold the mode and the light button for 5 seconds. A beeping sound indicates that Wi-Fi has been successfully reset.
diagram, schematic

Connect with Mi Home / Xiaomi Home App
This product works with Mi Home / Xiaomi Home app*.
Control your device with Mi Home / Xiaomi Home app.

qr code Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search “Mi Home / Xiaomi Home” in the app Store to download and install it.

Open Mi Home / Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.

*The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of Mi Home app might have been updated, please follow the instructions based on the current app version.

Filter Replacement
The average filter replacement period is 6 – 12 months.
When the filter needs to be replaced, the screen will display the remaining service life of the filter when the purifier is turned on.
diagram, venn diagram, circle

Please refer to the Filter Replacement label on the inside of the filter compartment panel for detailed instructions. Make sure to turn off and unplug the purifier before replacing the filter.
shape, arrow After replacing the filter turn on the purifier, and press and hold the filter reset button for 6 seconds. A beeping sound indicates that the filter has been successfully replaced, and the filter service time has been reset.

Note: Purifier with RFID label at the bottom do not require reset.

Note: When the filter is saturated by harmful gases, it may give off odors. Please place the filter in a sunny and ventilated place to eliminate odors.

Maintenance

Please make sure to turn off the air purifier and disconnect power before performing the following operations.

Clean the filter cabinet
For best performance, use a vacuum cleaner or soft cloth to remove dust clinging to air inlets or cabinet walls.

Clean laser particle sensor
Use a non-sharp tool to open the laser particle sensor cover, and use an air blow gun or hair dryer to clean the laser particle sensor and its back cover.

Note: Do not use hot air.

Specification

Name

500 m3/h *

---|---|---|---|---|---

Model

70 m3/h *

Item Dimensions

| 260 × 260 × 735 mm| Rated Power| 66 W| CCM (Particle)|

P2

Net Weight

Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

Effective coverage*

< 2.0 W

Max RF Output Power

| Wi-Fi 2.4G (2400 – 2483.5 MHz): 14.85 dBm

Calculated based on standard Q/BJZMK0001-2018

Regulatory Compliance Information

Europe — EU declaration of conformity

Hereby, Beijing Smart mi Electronic Technology Co., Ltd. declares that the radio equipment – Mi Air Purifier Pro, type AC-M3-CA is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://www.mi.com/global/service/support/declaration.html

Disposal and recycling information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzen
www.beryko.cz