Bissell Cleanview Connect Robotic Vacuum User Manual
- June 7, 2024
- Bissell
Table of Contents
- Bissell
- What’s in the Box?
- Product View
- Setting Up Your Robot
- Connecting to the App
- Manual Cleaning
- Automatic Cleaning
- Activating Low Power Mode
- Cleaning the Dirt Bin
- Cleaning the Brush Roll
- Replacing the Edge Cleaning Brushes
- Cleaning the Sensors
- Replacing the Battery
- Storing Your Robot
- Status and Error Notifications
- Error Notifications
- Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Bissell
Cleanview® Connect Robotic Vacuum
User Manual
Model: 2908N
What’s in the Box?
Product View
WARNING
Do not plug in your robot until you are familiar with all instructions and
operating procedures.
- Power Switch
- Start/Pause Button
- Contact Points (for automatic charging)
- Cliff Sensors
- Bumper
- Edge Cleaning Brushes
- Front Wheel
- Rear Wheels
- Dirt Bin Release Button
- Dirt Bin (filters inside)
- Brush Roll
- DC Port
- Removable Battery
- LED Light Ring
Setting Up Your Robot
Place the back of Docking Station firmly against a wall. Ensure there is at least 1 meter to one side, 1 meter to the opposing side and no obstructions in front of the Docking Station.
Insert the Docking Station Power Adapter plug into the port on the side of the Docking Station, then plug the other end into the wall outlet. Turn the robot’s Power Switch ON and put on the Docking Station. The first charge will take 4-5 hours.
Connecting to the App
Downloading the BISSELL Connect App means you can change your robot’s cleaning mode, start, pause, or stop your robot, schedule cleanings, view notifications, track your cleaning history, and troubleshoot all from the palm of your hand.
Manual Cleaning
Automatic Cleaning
You can designate a day and time for your robot to run automatically using the BISSELL Connect App. Once the robot is connected to the app, go to the Schedule tab and follow the on-screen prompts.
Activating Low Power Mode
Cleaning the Dirt Bin
Cleaning the Brush Roll
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect
plug from electrical outlet before performing maintenance or troubleshooting
checks.
Replacing the Edge Cleaning Brushes
A Phillips-head screwdriver is required for this task.
NOTE: After being used for a period of time, the Edge Cleaning Brushes need to be cleaned to work more effectively. Once removed, the Edge Cleaning Brushes can be rinsed or soaked in water. Be sure they are completely dry before returning to the machine.
Cleaning the Sensors
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect
plug from electrical outlet before performing maintenance or troubleshooting
checks.
After repeated use, debris can accumulate on the sensors of the robot and the robot’s performance could be affected.
To ensure the best efficiency, the sensors should be cleaned off periodically by brushing any debris from them.
Before cleaning the sensors, ensure the Power Switch on the robot is in the OFF (0) position.
Replacing the Battery
A Phillips-head screwdriver is required for this task.
DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK.
Storing Your Robot
Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged.
Status and Error Notifications
Status Notifications
Error Notifications
©2020 BISSELL Inc. All rights reserved.
Part Number 1625231 07/20
Documents / Resources
|
Bissell Cleanview Connect Robotic
Vacuum
[pdf] User Manual
Cleanview Connect Robotic Vacuum, 2908N
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>