NITECORE All Round Flashlight Expert User Manual
- June 7, 2024
- Nitecore
Table of Contents
NITECORE All Round Flashlight Expert
Features
- Premium CREE XM-L2 (U2) LED
- Maximum output of 960 lumens
- Integrated “Precision Digital Optics Technology” provides extreme reflector performance
- Boasts a peak beam intensity of 20,900cd and a throw distance of up to 289 meters
- High efficiency circuit board provides up to 520 hours runtime
- Side switch interface provides one-handed operation and easy access to all flashlight functions
- Side switch features a power indicator light displays remaining battery power (Patent No.ZL201220057767.4)
- Power indicator’s secondary function displays battery voltage (accurate to 0.1V)
- Intelligent memory function stores preferred brightness setting
- Integrated impact resistance mechanism with reverse polarity protection (patented)
- Flashlight head retaining ring protects the core components from damage
- Toughened ultra-clear mineral glass with anti-reflective coaling
- Constructed from aero grade aluminum alloy with HAIII military grade hard anodized finish
- Waterproof in accordance with IPX8 (two meters submersible)
- Impact resistant to 1 meter
- Stainless steel titanium-plated two-way clip included
- Tail stand capability
Dimensions
- Length: 151 mm (5.94″)
- Head Diameter: 40mm (1.57″)
- Tail Diameter: 25.4mm (1 “)
- Weight: 136grams (4.80oz)(without battery)
Accessories
- Quality holster
- Clip
- Tactical ring
- Lanyard
- Spare tail cap
- Spare 0-ring
Battery Options
|
SIZE
| Nominal voltage|
Compatible
---|---|---|---
Primary Lithium battery
| CR123| 3V|
Y (Recommended)
18650 Rechargeable Li-ion battery
| 18650| 3.7V| Y (Recommended)
Rechargeable Li-ion battery| RCR123| 3.7V|
y
Brightness & Runtime
FL 1 STANDARD
| HIGH| MID| LOW| LOWER| STROBE| SOS|
Location Beacon
---|---|---|---|---|---|---|---
|
960
LUMENS
| 230
LUMENS| 65
LUMENS| 1
LUMEN| 960
LUMENS| 960
LUMENS|
960
LUMENS
****|
1h45min
| 5h30min| 26h| 520h| –| –|
–
****|
289m
| 137m| 64m| 9m| –| –|
–
****|
20900cd
| 4710cd| 1000cd| 23cd| –| –|
–
**| 1m (Impact Resistant)
**| IPX8, 2m (Waterproof AND Submersible)
NOTICE
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL 1 using one x 3. 7V 2600mAh 18650
battery under laboratory conditions. The data may vary slightly during real-
world use due to battery type, individual usage habits and environmental
factors.
Operation instructions
Battery installation
Insert one 18650 battery or two CR123 batteries with the positive pole pointing forward (toward the light head).
WARNING
- Ensure batteries are inserted with the positive ( +) end pointing to the head. The P16 will not operate with incorrectly inserted batteries.
- Ensure when turning the P16 on, the beam is directed away from the eyes of people or animals.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second lime until a “click”
is heard.
General Operations
With the light turned on, press the side switch in quick succession to cycle
through the following brightness levels: ultra-low, low, medium and high. Once
a desired setting is displayed, ii may be saved by turning the light off at
the tail switch.
Note: For user safety and to prevent overheating/ failure, the P16 will
automatically switch to a lower mode after three minutes of use at its highest
level of output.
Special Modes
With the light turned on, press and hold the side switch lo activate Strobe
mode. Press and hold once again to access Location Beacon mode and repeat once
more for SOS mode. To exit any one of these modes simply press the side switch
lo be returned lo your previously used brightness level.
NB: Strobe mode is the default special mode and is the only special mode that
has a memory function. If the light is turned off at the tail switch while in
strobe mode, strobe will resume when the light is next turned on. SOS and
Location Beacon modes have no memory function.
Power Tips
- With the light switched on, the power indicator will blink once every two seconds when power levels reach 50%.
- With the light switched on, the power indicator will blink rapidly when power levels are low.
- With the light turned off, press and hold the side switch while simultaneously pressing the tail switch lo display the battery voltage (accurate lo ±0.1V) with a series of blinks. For example, when the battery voltage is at a maximum charge of 4.2V, the power indicator will blink 4 times in quick succession, followed by a one second pause and two more blinks, indicating a total battery voltage of 4.2V.
Changing Batteries
When the power indicator blinks rapidly this indicates the batteries need to be replaced. Alternatively if the light becomes dim or unresponsive to adjustment this also indicates batteries need to be replaced.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service.
Should any problem covered under warranty occurs, customers can contact their
dealers or distributors in regards to their warranty claims, as long as the
product was purchased from an authorized dealer or distributor. NITECORE’s
Warranty is provided only for products purchased from an authorized source.
This applies to all NITECORE products.
Any DOA/ defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all
defective / malfunctioning NITECORE® products can be repaired free of charge
for a period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor and
maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed
and/or modified by unauthorized parties, or damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact
a local NITECORE® distributor or send an email to
service@nitecore.com.
AII images, text and statements specified herein this user manual are for
reference purpose only. Should any discrepancy occurs between this manual and
information specified on www.nitecore.com. Sysmax Industry Co., Ltd. reserves
the rights to interpret and amend the content of this document at any time
without prior notice.
SYSMAX Industry Co., Ltd. TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District,
Guangzhou, 510623, Guangdong, China
Thanks for purchasing NITECORE!
Documents / Resources
|
NITECORE All Round Flashlight
Expert
[pdf] User Manual
All Round Flashlight Expert, P16 Flashlight Expert
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>