SOL-EXDEDT Speed Controller User Manual
- June 7, 2024
- SOL-EXDEDT
Table of Contents
USER MANUAL
ER105 SPEED CONTROLLER
Order No.: ER105
Conrad No. 248760
www.1zu87modellbau.de
CONTROLLER FORWARD / REVERSE
Technical data | RE 105 |
---|---|
Operating current in V | 2,7 – 5,5 |
Motor current continuous in mA | 1800 * |
Motor current impulse in A | 8* |
Weight excluding cable in g | 0,32 |
Dimensions in mm (l x b x h) | 12,8 x 9 x 2,5 |
Automatic zero-point recognition | yes |
(*) The output stage should be cooled in an appropriate manner that corresponds to the loading of the controller!
Wiring diagram
ER105 Functions and instructions
This speed controller stands out on account of its state-of-the-art
functionality in the smallest possible space.
With a continuous current of 1900 mA and an impulse current of 8 A, the ER105
is not only suitable for 1:87 scale modelling, but also for considerably
larger scales, such as 1:32. The stored linear characteristic line guarantees
a convenient control of DC motors.
Switching on the transmitter and receiver unit.
First, the transmitter is switched on, then the receiver. The control knobs
must not be moved until approx. 3 seconds.
Now the precise zero points are registered.
Safety instructions to ensure long service from the ER105
Before first using the ER105, the following checks should be made to prevent
any damage being caused to the controller:
– check on the polarity of the operating current
– check that there is no short-circuit at the motor outputs.
In case of faults or malfunction of the ER105, please read our suggested hints
for suggested solutions under
www.1zu87modellbau.de here you will also find
tips for correcting faults.
– Subject to modification / E&OE / As of June 2009 / Christian Reply © –
CEO: Christian Reply
SOL-EXPERT group
Dept. 1zu87modellbau.de
Mehlisstrasse 19
D- 88255 Brandt
vertrieb@1zu87modellbau.de
Phone: +49.7502.94115.0
Fax: +49.7502.94115.99
www.1zu87modellbau.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>