TECHKO SG-816 Solar Spotlight User Manual
- June 13, 2024
- TECHKO
Table of Contents
TECHKO SG-816 Solar Spotlight
Product Information
The Solar Spotlight is a solar-powered light that automatically turns on at night using the power stored in its battery. It features a photosensor that detects light and a solar panel for charging the battery during the daytime. The product is made of ABS/Resin material and has a waterproof performance rating of IP65. The package includes a solar box, spot light, unit, and user manual. The product comes with a 1-year limited warranty.
Product Usage Instructions
- Before using the Solar Spotlight, please fully charge the product. Ensure that you charge it outdoors or in a place where direct sunlight can reach the solar panel for proper charging.
- During the daytime, the light will automatically turn off and start charging the battery.
- At night, the light will automatically turn on using the power stored in the battery. You can also cover the solar panel with your hand to simulate night mode.
- Do not look directly at the LED light to avoid damaging your eyes.
- Do not attempt to disassemble or remodel the product, as it can be dangerous and will void the warranty.
- Keep the product away from flammable items to prevent explosions or injuries.
- If the product will not be used for a long period of time, switch it off.
For further information or assistance, please visit our website at www.techkogroup.com or contact us at 1-888-883-2456 or support@techkogroup.com.
SAFETY INSTRUCTION
- Carefully read this manual before using the product.
- Keep the manual with you for reference as needed.
PLEASE FULLY CHARGE THE PRODUCT BEFORE USING
- Do not charge the solar light indoors or any place where direct sunlight cannot reach the solar panel. Otherwise, the product will not charge properly.
- Charging time may vary depending on weather, temperature, and seasons. Please keep the solar panel clean to make sure the product can properly charge.
- Frequently clean solar panel as needed. Avoid scratching on the panel or it may lower charging efficiency.
- Ensure that the soil where the spike is to be placed is soft enough to insert to prevent any damage to the spike/pole when installing.
- This can be done by adding water to the soil to help soften the installati on site or gently breaking up soil with a tool before installation.
How to Operate
- Adjust the solar panel and light using the adjustable knobs for optimal positioning.
- Connect Contact-01 to Contact-02. Secure the cover from Contact-01 by twisting the cover onto Contact-02.
- Slide the ON/OFF switch located behind the solar panel to the left to turn the unit to the ON position.
- Slide the ON/OFF switch located behind the solar panel to the right to turn the unit to the OFF position.
- Adjust the distance between of unit and spot light. (approximate 40 inches), to shine the unit.
HOW THE SOLAR POWERED LIGHT WORKS
- In the daytime the light will automatically turn off and begin to charge the battery.
- The solar panel has a photosensor to detect light . At night, the light automatically turns on using the power stored (you also can cover the solar panel with your hand to simulate night made.）
WARNING & NOTICE
- Do not look directly at the LED light, or it may damage your eyes.
- Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
- Keep the product away from flammable items, or explosion or injuries may occur.
- Switch OFF the product when it is not in use for a long period of time.
PRODUCT SPECIFICATION
This product has a 1-year limited warranty. For further information, please visit our website at www.techkogroup.com
CONTACT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>