GPO Brooklyn 1980S Style Portable Boombox User Manual
- June 17, 2024
- GPO
Table of Contents
- GPO Brooklyn 1980S Style Portable Boombox
- Product Information
- Product Usage Instructions
- FAQ
- INTRODUCTION
- Control Locations
- Power
- Battery
- Volume, Bass, Treble and Balance Controls
- Radio
- FM Radio
- Tape
- CD
- USB
- Bluetooth
- AUX IN
- Headphones
- Microphone
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GPO Brooklyn 1980S Style Portable Boombox
Product Information
Specifications
- LED Display
- FM Radio Tuner Display
- Info Button
- Mode Select Knob
- Output Level Switch
- Playback Controls
- Play/Pause
- Previous
- Rewind
- Stop
- Fast Forward
- Next
- Record
- Search Knob (External Ring)
- Search Knob (Central Control)
- Menu Button
- Mode Switch
- Tape Counter
- Balance Knob
- Treble Knob
- Cassette Slot
- Volume Knob
- Bass Knob
- Power Button
- Tape Playback Controls
- Record
- Play
- Rewind
- Fast Forward
- Stop/Eject
- Pause
- Headphone Jack
- Speakers
- Microphone Jacks
- AUX IN Jacks
- AUX OUT Jacks
- LINE IN Jack
- USB Slot
- LED Charging Indicator
- Power Jack
- Handle
- Aerials
- CD Slot
- CD Eject Button
Product Usage Instructions
Power
To reconnect the battery, refer to the battery diagram provided in the user
manual. Ensure that the battery is properly connected to the unit. To change
the battery, follow these steps:
- Open the battery compartment located on the rear of the unit.
- Remove the old battery.
- Insert a new battery, ensuring proper alignment.
- Close the battery compartment.
Battery
Please note that if the unit is being charged and the battery is less than
75% charged, there may be interference on the DAB radio channels. To resolve
this, fully charge the battery before use. If the battery isn’t charging,
follow these steps:
- Ensure that the battery is connected properly as per the battery diagram provided in the user manual.
- Check that the unit is properly connected to the mains.
- If using a 240V power cable, ensure it is connected correctly. The LED light on the rear of the unit should glow solid red when connected properly.
- Once the battery is fully charged, the LED light will glow solid blue.
If the battery drains too quickly, ensure that it is fully charged before use. It takes approximately four hours to fully charge the battery.
Volume, Bass, Treble and Balance Controls
Please note that the volume, bass, treble, and balance levels should be
referred to on the LED screen located on the front of the unit, not the
markers on the control knobs. If no sound is coming from the unit, follow
these steps:
- Ensure that the unit is turned on and fully charged.
- Check that the selector is in the correct position for your chosen function.
- Set the volume properly by rotating the volume knob clockwise to increase the volume. Rotating the knob more than 360 degrees will set the unit to maximum volume, displayed as “MAX” on the LED screen.
- Refer to the specific sections of the user manual for further information on your chosen function.
FAQ
Q: What should I do if I am still experiencing problems?
A: If you are still experiencing problems, please contact our customer
service team at 0330 024 0383 for further assistance.
INTRODUCTION
Thanks for purchasing the GPO Brooklyn Boombox. This iconic 1980s design combines classic styling with a range of modern functionality. Featuring built-in speakers and a range of playback modes, the Boombox will allow you to enjoy Radio, CD, USB, and Bluetooth sound anywhere inside or outside your home! For that real authentic 80s feel, the Brooklyn Boombox also features cassette tape playback. If you’re having trouble getting the most from your Brooklyn Boombox, please consult this Troubleshooting guide and the product manual.
Control Locations
FRONT
-
LED Display
-
FM Radio Tuner Display
-
Info Button
-
Mode Select Knob
-
Output Level Switch
-
Playback Controls
- Play/Pause
- Previous
- Rewind
- Stop
- Fast Forward
- Next
- Record
-
Search Knob (External Ring)
-
Search Knob (Central Control)
-
Menu Button
-
Mode Switch
-
Tape Counter
-
Balance Knob
-
Treble Knob
-
Cassette Slot
-
Volume Knob
-
Bass Knob
-
Power Button
-
Tape Playback Controls
- Record
- Play
- Rewind
- Fast Forward
- Stop/Eject
- Pause
-
Headphone Jack
-
Speakers
SIDE -
Microphone Jacks
-
AUX IN Jacks
-
AUX OUT Jacks
-
LINE IN Jack
-
USB Slot
REAR -
Battery Compartment –
NOTE, DO NOT OPEN -
LED Charging Indicator
-
Power Jack
TOP -
Handle
-
Aerials
-
CD Slot
-
CD Eject Button
Power
The unit won’t turn on
To switch on the unit, press the Power button on the front of the unit. If the
unit will not switch on, ensure that the battery is fully charged. The first
time charge will take around four hours. Once this charge has been completed,
the LED light on the rear of the unit will turn blue. If you wish to use the
unit without fully charging the battery, disconnect the white connector from
the connection point within the battery compartment. You can now run the unit
directly from the mains
Reconnecting the battery
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Battery
Please note: If the unit is being charged and the battery is less than B75% charged, there will be interference on the DAB radio channels. To correct this issue, please fully charge the battery before use.
The battery isn’t charging
First, ensure that the battery is connected properly as per the “reconnecting
the battery” image on the previous page. Now, ensure that the unit is properly
connected to the mains. If the 240V power cable is connected correctly, the
LED light on the rear of the unit will glow a solid red. Once the battery is
fully charged, the light will glow a solid blue.
The battery drains too quickly
Once fully charged, the GPO Brooklyn Boombox will provide you with up to six
hours of playback, depending on the features which you use. If your unit cuts
out during play back, ensure that the battery is fully charged before use.
Fully charging the battery will take approximately four hours.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Volume, Bass, Treble and Balance Controls
Please note: refer to the volume, bass, treble and balance levels on the LED screen located on the front of the unit, not the markers on the control knobs.
No sound is coming from the unit
Ensure that the unit is turned on and fully charged. Ensure that the selector
is in the right position for your chosen function. Ensure that the volume has
been set properly. Rotating the volume knob clockwise turns up the volume.
Rotating the knob more than 360o will set the unit to maximum volume, and the
LED screen will display “MAX.” For further information, consult the sections
of this guide which cover your chosen function.
Sound is only coming from one speaker
Adjust the balance control so that the LED screen displays “00”.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Radio
There is no sound coming from the unit
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to DAB. Ensure that the
volume has been set correctly.
The DAB reception is poor
Adjust the unit’s aerials to see if this improves reception.Ensure that the
unit’s battery is not charging, as this many generate interference as detailed
above. Change the unit’s location. Nearby appliances with amplifiers or moving
parts can generate interference. Ensuring that the unit is as far as possible
from televisions, hi-fi amplifiers and mechanical appliances such as washing
machines can help to reduce interference. If relocating the unit does not
help, a full factory reset of the unit may be required: To perform a DAB
Factory Reset, press the Menu Button, then use the Search Knob to select
System, then Reset. You will be asked to confirm your decision by using the
Search Knob to select “Y” on the LED before pressing the Search Knob a final
time. Once a full reset has been completed, you will need to re-scan for DAB
channels:
- To scan automatically, press the Menu button and then use the external part of the Search Knob to select Full Scan
- Push in the central part of the Search Knob to begin the automatic DAB station scan
- To scan manually, use the central part of the Search Knob to select Manual Scan
- Push in the central part of the Search Knob to begin the manual DAB station scan
- Select your chosen station by pushing in the central part of the Search Knob. The station will now be added to the DAB station list
FM Radio
There is no sound coming from the unit
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to FM Radio. Ensure that
the volume has been set correctly.
The radio reception is poor
Fine-tune the radio to ensure you are receiving the strongest signal. Adjust
the unit’s aerials to see if this improves reception. Ensure that the unit’s
battery is not charging, as this many generate interference as detailed above.
Change the unit’s location. Nearby appliances with amplifiers or moving parts
can generate interference. Ensuring that the unit is as far as possible from
televisions, hi-fi amplifiers and mechanical appliances such as washing
machines can help to reduce interference.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Tape
There is no sound coming from the unit
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to tape. Ensure that the
volume has been set correctly. Ensure that the tape has been inserted
correctly and that the unit’s tape door is firmly closed. Ensure that the tape
has been rewound fully before beginning playback. Nothing is recording to the
tape cassette Ensure the unit is fully charged or plugged into the mains.
Ensure that the unit is turned on and that the selector has been set to the
correct mode (eg. DAB if you wish to record from DAB radio). Ensure that the
tape has been inserted correctly and that the unit’s
The tape door is firmly closed.
Ensure that the tape has been rewound fully before recording. Ensure that you
are using an empty tape that is able to record. Remember – if a cassette has
holes in the top corners, these need to be blocked with sticky tape or paper
to allow for recording.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
CD
The CD is not playing
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to CD. Ensure that the
volume has been set correctly. Ensure that the CD has been inserted correctly
with the label facing towards the rear of the unit. Ensure that the CD is free
from scratches and damage. If the CD is still not playing, remove and re-
insert the CD.
The CD is not reading
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to CD. Ensure that the
volume has been set correctly. Ensure that the CD has been inserted correctly
with the label facing towards the rear of the unit. Ensure that the CD is free
from scratches and damage. If the CD is still not reading, remove and re-
insert the CD.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
USB
The USB is not playing
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to USB. Ensure that the
volume has been set correctly. Ensure that the USB has been inserted
correctly. If the USB is still not playing, remove and re-insert the USB.
USB is not reading
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to USB. Ensure that the
volume has been set correctly. Ensure that the USB has been inserted
correctly. Ensure that the USB contains the correct files in an MP3 format If
the USB is still not reading, remove and re-insert the USB.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Bluetooth
There is no sound coming from the unit
Ensure the unit is fully charged or plugged into the mains. Ensure that the
unit is turned on and that the selector has been set to Bluetooth. Ensure that
the volume has been set correctly.
The unit will not pair with the chosen device
First, turn the unit off and on using the power button. Ensure that the unit
is turned on and that the selector has been set to Bluetooth. Check that your
device is not already paired with a different device. Attempt to pair with the
GPO Brooklyn again. If prompted, enter the key 0000.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
AUX IN
There is no sound coming from the unit Ensure the unit is fully charged or plugged into the mains. Ensure that the unit is turned on and that the selector has been set to AUX IN. Ensure that the volume has been set correctly. Ensure that the cables have been connected properly, using the colors on the units and cables as a guide. Check to ensure that the cables are undamaged. Ensure that the device you are attempting to connect is powered on and working.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Headphones
There is no sound coming from the headphones Ensure the unit is fully charged or plugged into the mains. Ensure that the unit is turned on and that the selector has been set to the correct function. Ensure that the volume has been set correctly. Ensure that the headphones are connected to the headphone port and that this port is free of debris. Please note – headphones with built-in microphones may not work correctly.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
Microphone
The microphone input is not making a sound Ensure the unit is fully charged or
plugged into the mains. Ensure that the unit is turned on and that the
selector has been set to the correct function.
Ensure that the volume has been set correctly. Ensure that the microphone is
connected to the microphone port and that this port is free of debris. Please
note – headphones with built-in microphones may not work correctly.
Further, help
If you are still experiencing problems, contact our customer service team on
0330 024 0383.
IMPORTED AND DISTRIBUTED BY:
ProTelX Ltd, Unit 6, Park 17 Industrial Estate, Moss Lane,
Whitefield, Manchester, M45 8FJ UK
References
- Manual-Hub.com - Free PDF manuals!
- GPO Retro - Official Manufacturer of Stylish Retro Products.
- Manual-Hub.com – Free PDF manuals!