Centerm P12 Mini POS Terminal User Guide

Centerm P12 Mini POS Terminal

Technical Specs

ATTENTION

Warning

• Read all instructions and safety information before use to avoid injury.
• The limit operating ambient temperature of the device declared by the manufacturer is -10~45°C.

Battery Safety

• Charge the battery only at ambient temperatures ranging from 0-40°C.
• Dispose of used batteries according to the manufacturer’s instructions.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type of battery recommended by the manufacturer.

Statement

• The equipment damage caused by natural disasters, falling, self disassembly and non-compliance with the operation specifications is not covered by the free warranty.
• Some details of this document may be inconsistent with the real object due to the update iteration of the product. Please take the real object as the standard, and our company reserves the right to interpret this document.

Product Diagram

• NFC Card Reader
  NFC antenna locates at the bottom of the screen. It’s used to sense chips and acquire data in a contactless way.

• IC Card Reader
  Used for inserting the bank chip card and getting information securely.

• Front Camera
  Used to take photos or videos needed or complete commercial paymer through a camera base on a third-party app

• Display
  Set for merchants to complete business settlements and for customers to input the password to finish the payment.

• Power Button
  Used for changing the running states of the device, such as pressing 2 3 seconds to power on/off or screen capture and pressing 10 seconds to restart automatically when the device is crashed.

• Card Slot
  The card slot is on the right side of the device and can be pushed out by holding the card pin like in smartphones.

• USB type-C
  Used for device charging and plugging in the peripheral device which supports OTG.

• Pogo Pin
  The 2-pin expanded interface is severed as the channel to connect the charging cradle for a better power supply.

Card Selection Instruction

Package List

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the Body with the minimum separation distance of Omm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This product is in compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2A2UU-P12 All transmission frequencies of U-NII-1,U-NI1-2A and U-NI1-3 comply with 47 CFR FCC Part15.407(g) and the manufacturer declares that their transmission is maintained within the U-NII-1, U-NI1-2A and U-NII-3 bands.

References

• FCC OET Authorization Search

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>