PHILIPS ANDERIC Master Instruction Manual

PHILIPS ANDERIC Master

Introduction

We want to thank you for purchasing this Universal Hospitality remote by Anderic®. With the purchase of this remote you should receive a screw for the battery cover. Battery cover screw is optional; battery cover does not need screw to hold it in place. This remote requires two AAA size batteries, not included.

Optional Security Cable Attachment
Optional Security Cable available from anderic.com, Part number: CBL01. This cable easily adheres under the battery cover for a secure and flush appearance.

Pre-programmed Codes

This remote is pre-programmed by default to LG and VIZIO TVs under TV mode and DirecTv under STB Mode (Set-Top-Box). If the TV or STB is not one of the brands above, you must program the remote using the directions below:

NOTE: If [S] key is not present on your remote, note that it is the unmarked button to the right of the [POWER] key.

Programming the remote: Direct Code Input Method

1. Turn on the device you want to control, and find the corresponding brand code from attached code list.
2. Press and release the device mode key you would like to program ([TV] or [STB]).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
4. Input the four digits code. If remote successfully saved code, indicator light will go out. If error, indicator light will blink slowly three times and go out, repeat steps 1-4.
   a. Check if most keys of remote control can control the device, if not, please restart step 1-4 using a different code.
   b. After trying all codes for your brand without success, please try “Programming the remote – Code Search” method below.

Note: During the programming mode, pressing any button other than number buttons or not pressing any button for 10 seconds will cause remote to exit programming mode.

Programming the remote: Code Search Method

Note: use this method if your brand is not listed in the codes attached, or if all the codes you tried does not work. This method scans through each code in the database.

Manual search

1. Turn on the device you want to control.
2. Press and release the device mode key you would like to program ([TV] or [STB]).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
4. Repeatedly Press [CH+] to search forwards or [CH-] to search backwards; remote will send the code of POWER one by one.
5. When device is turned off, immediately press [S] button to save and exit. Check if most keys of remote can control the device, if not, please restart from step 1, remote will pick up where it left off in code database.

Auto search

1. Turn on the device you want to control.
2. Press and release the device mode key you would like to program ([TV] or [STB]).
3. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
4. Press and release [POWER] key, mode indicator light will blink one time and continue to blink every 2 seconds. Remote is sending codes of POWER one by one. If to press [CH+] / [CH-] can change the searching direction.
5. When device is turned off, immediately press [S] button to save and exit. Check if most keys of remote can control the device, if not, please restart from step 1, remote will pick up where it left off in code database.

Code Display

About: use this method to display the code that is currently programmed.

1. Press and release the device mode key ([TV] or [STB]) in which you want to display programmed code for, then follow steps below:
   a. Press and release keys [MUTE] and [1] simultaneously, then release. The LED flashing times represents the first digit of code. Note: If digit is 0, the LED will not flash.
   b. Press and release keys [MUTE] and [2] simultaneously, then release. The LED flashing times represents the second digit of code.
   c. Press and release keys [MUTE] and [3] simultaneously, then release. The LED flashing times represents the third digit of code.
   d. Press and release keys [MUTE] and [4] simultaneously, then release. The LED flashing times represents the fourth digit of code.

Note: If digit is 0, the LED will not flash.

Single Press Combined POWER Key

About: This allows for powering on/off both your TV and STB (Set-top-box) with one press of the [POWER] button. If enabled, pressing [POWER] key will send code for power for both units. If disabled, pressing [POWER] key will only send code for TV. See steps below.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Device mode indicator light will light. It doesn’t matter which mode lights.
3. Input code [9] [9] [9] [5].
   a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “one key power-off all devices” was successfully Enabled;
   b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits, this indicates that “one key power-off all devices” was successfully Disabled.

Note: After one key power-off all devices successfully enabled, press [POWER] key, it will send STB Power immediately followed by TV Power code.

STB (set-top-box) Punch-Through Function

About: When enabled, this feature allows assigning the STB related keys to always send codes programmed under STB mode, no matter what mode the remote currently resides. This feature has been enabled by default. Keys affected are: 0 thru 9, Enter, Prev CH, CC, CH+ and CH-. Follow steps below to enable or disable this feature.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Device mode indicator light will light. It doesn’t matter which mode lights.
3. Input code [9] [9] [9] [0].
   a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “STB punch-through” was successfully enabled;
   b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits; this indicates that “STB punch-through” was successfully disabled.

TV Punch-Through Function

About: When enabled, this feature allows assigning all TV related keys to always send codes programmed under TV mode, no matter what mode the remote currently resides. This feature has been enabled by default. Keys affected are Power, VOL+, VOL-, Mute, Input and Sleep. Follow steps below to enable or disable this feature.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Device mode indicator light will light. It doesn’t matter which mode lights.
3. Input code [9] [9] [9] [1].
   a. Enabled – (0 blinks): If LED turns off directly after inputting the four digits, this indicates that “TV punch-through” was successfully enabled;
   b. Disabled – (2 blinks): If LED blinks 2 times after inputting the four digits; this indicates that “TV punch-through” was successfully disabled.

Individually assign key Punch-through Lock

Note: Before proceeding; the following features must be first DISABLED: “TV Punch-through Function,” “STB punch-through Function,” and “Single Press Combined Power Key.”
About: This allows for individually assigning keys to “punch-through” to the mode of your choosing. After enabling punch-through, the key will always send code for assigned mode no matter what mode the remote currently resides.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light nlights and remains on, release both keys.
2. Input the 2 digits code [9] [8].
3. Press the button you want to lock.
4. Press the device mode button you want assign it to (e.g. [TV] or [STB])
   a. If successful, LED will turn off directly after pressing the Mode button. Repeat steps 1 – 4 for each button lock.

Notes: Applicable to all buttons except for: [S], [TV], [STB]. To re- assign a key to different mode, you first unlock the key using steps from Individually Assign Punch-through Unlock section below, then repeat steps 1-4 to reassign it to correct mode.

Individually Assign Punch-through Unlock

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Input the three digits [9] [0] [0],
3. Press the button you want to unlock the punch-through, the LED will blink one time & turn off.

Device Mode Lock

About: This is used to lock the code for the device so they cannot be re- programmed. After device is locked, the current code cannot be changed, and any other operation is invalid unless you repeat steps 1- m3 to unlock first.

1. Press and release the device mode key you would like to lock code for ([TV] or [STB]).
2. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
3. Input code [9] [9] [9] [9],
   a. Locked – If LED turns off directly after 4 digits input, it indicates mode successfully locked.
   b. Unlocked – If LED blinks 2 times and turns off after 4 digits input, it indicates mode successfully unlocked.

Reset to Factory Default Status

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Input code [9] [7] [6] [0]. Indicator light will turn off, indicating that the remote has been reset to factory default status.

Advanced Option: Shift remote to 1-Device; TV only remote.

Note: This feature allows remote to switch from a 2-Device remote to a 1-Device; TV only remote. STB mode will be deactivated. Remote will be reset to factory defaults for 1-Device.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Input code [9] [7] [6] [1]. Indicator light will blink 3 times, indicating that the remote has successfully been reset to factory default status and converted to a 1-Device remote.

Advanced Option: Shift remote to 2-Device; TV/STB remote.

Note: This feature allows remote to switch from a 1-Device remote to a 2-Device; TV and STB enabled remote. Both modes will be activated. Remote will be reset to factory defaults for 2-Device.

1. Press and hold [S] and [ENTER] keys simultaneously for about three seconds until indicator light lights and remains on, release both keys.
2. Input code [9] [7] [6] [2]. Indicator light will blink 3 times, indicating that the remote has successfully been reset to factory default status and converted to a 2-Device remote.

LEGAL: Anderic® is a registered trademark of Dan’s Electronics Etc., Inc. All rights reserved. This document is copyrighted.

TV CODES

2169 2170
 | 2171
Dynex| 1974 2030 2038 2085 2086 2116 2117 2118 2119
Electroband| 1911
Electrograph| 2009
Electrohome| 1927 1998
Element| 2001 2023 2037
Emerson| 1922 1923 1926 1927 1967 1996 1997 2019 2026
Emprex| 1969
Envision| 1964 1985 2029 2032
ESA| 1939 1922 2026
Funai| 1911 1922 2026
Gateway| 2009
GE| 1910 1913 1923 1926 1971 1981
GFM| 1922 1997 2026 2036
Gibralter| 1912
GoldStar| 1923
Haier| 2007 2008 2050
Hallmark| 1923
Hannspree| 1962
Harman/|
---|---
Kardon| 1915
Havermy| 1917
Hello Kitty| 1926
Hisense| 1931 1995 2033 2058 2089 2090 2091 2092 2093 2126 2127 2128 2129 2130 2131
 | 2172 2173 2174 2175
Hitachi| 1994 1919
iLo| 1967 1997 2000
Infnity| 1915
Insignia| 1970 1983 1927 1922 1995 2002 2024 2026 2030 20942095 2096 2097 2098 20992101
 | 2102 2103 2104 21052106 2107 2108 2109 21102111 2132 2133 2134 2135 2316 2137
 | 2318 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2167 2176
Inteq| 1912
JBL| 1915
JCB| 1911
Jensen| 1933
JVC| 1914 1927 1955 1987 2013 2045
KDS| 1977 2001
KLH| 1934
LG| 1970 1971 1912 1923 2059 2066
LXI| 1910 1915 1921 1923
MAG| 1977 2001
Magnavox| 1913 1915 1922 1937 1964 1972 2018 2009 2020 2026 2062
Marantz| 1972 1915
Matsushita| 1924
Maxent| 2009
MB Quart| 2021
Megatron| 1919 1923
Memorex| 1920 19231927 1998 2024
MGA| 1920 1923
Midland| 1910 1912 1913
Mitsubishi| 1917 1920 1923 1954
Motorola| 1917
MTC| 1916
NAD| 1921 1923
NEC| 2015
NetTV| 2009
Nexus|
Electronics| 2037
Nikko| 1923
Norcent| 1931 1964 1985
Olevia| 1953 1961 1989
Optimus| 1924
Optoma| 1962
Optonica| 1917
Orion| 1927 1974
Panasonic| 1913 1924 1959 1973 1975 2045
---|---
PARK| 2034 2041
Penney| 1910 1921 1913 1916 1923
Petters| 1979
Philco| 1915 1922 1967 1997 2026
Philips| 1915 1972 2020 2006 2018 2062 2063
Pioneer| 1973
Polaroid| 1934 1958 1977 1979 2001 2011 2012 2035
Portland| 1926 1996
Prima| 1933
Prism| 1913
Proscan| 1910 1971 2044
Proton| 1923
Proview| 1977 2001
Pulsar| 1912
Quasar| 1913 1924
RadioShack| 1910 1923
RCA| 1910 1913 1917 1971 1981 1996 2014 2040 2042 2067
Realistic| 1923
Runco| 1912
Sampo| 2009
Samsung| 1916 1923 1930 1939 1948 2031
Sansui| 1922 1927 1998 2024 2025
Sanyo| 1915 1950
Sceptre| 1945 1952 1963 1986 2081
Scotch| 1923
Scott| 1923 2003
Sears| 1910 1915 1921 1923 1922
Sharp| 1917 1940
Sheng Chia| 1917
Signature| 1915
Sony| 1911 1938
Soundesign| 1923
Soyo| 2017
Spectroniq| 1977 2001
Squareview| 1922
Superscan| 1917
Supreme| 1911
SVA| 1931 2026
Sylvania| 1915 1922 1967 1997 2019 2023 2026
Symphonic| 1922
Syntax| 1953 1961 1989
Tandy| 1917
Technics| 1913 1924
Techwood| 1913
Teknika| 1915 1916 1920
Telefunken| 1930
---|---
TMK| 1923
TNCi| 1912
Toshiba| 1916 1921 1959 1980 2025 2028
TVS| 1927
Victor| 1914
Vidikron| 1915
Vidtech| 1923
Viewsonic| 1946 1960 1964 1984 1991 1993 2005 2009 2029 2032 2046
Viore| 2000 2034 2057 2112 21502151 2152 2153 2154
Vizio| 2010 1946 2314
Wards| 1910 1911 1912 1913 1915 1916 1921 1923
Waycon| 1921
Westinghouse| 1926 1946 1952 2004 2113 2114 2115 2156 2155 2157 2158 2159 2160 2161 2162
 | 2163 2155 2164 2165 2166 2177 2178
White|
Westinghouse| 1927 1996
Wyse| 1964
Zenith| 1910 1911 1912 1919 19231927 1970 1996

LG Hospitality Codes

Note : These codes work with LG TVs and the STB-2000 set to boxes.

Digital TV Converter Boxes

Note: These codes can only be programmed under STB mode.

CABLE

Note: These codes can only be programmed under STB mode.

0848 0948

COMCAST| 0752 1965 2022 2027 2082 2254 2275
COMTRONICS| 0049 0149
CONTEC| 0249
Cox| 1965 2022
DIGITAL MUSIC|
EXPRESS| 0053
Diego| 1951 2040 2270
Director| 2265
DirecTV| 2276 2277 2278 2279 2286
EASTERN| 0349
EVERQUEST| 0049
GARRARD| 0748
CG|
ELECTRONICS

General Instrument

| 0548

2256 2262 2265

GEMINI| 0255 0549
GE| 0556 2286
GI| 0048 0053 0148 0453 05520654 0747 0752 0754 0952 0947
HAMLIN| 0649 0747 0749 0849 2258 2261
HITACHI| 0947
ILLICO| 0252
i3 Micro| 1988
Insight| 1965 2022
Knology| 2022
JASCO| 0748
JERROLD| 0552 0747 0148 0453 0947 0048 0653 0254 2256 2262 2265
MAGNAVOX| 0150
Mediacom| 1965 2022
MEMOREX| 0250 2255
MOTOROLA| 0552 0148 0952 0453 0654 0754 0048 0752 0254 0947 1965 1951 2027 2262 2265 2270
 | 2271 2273
MOVIE TIME| 0350
Myrio| 1988 2016
NSC| 0350
---|---
OAK| 0249
 | 0550
PACE| 0854 1965 2022 2027 2257 2260 2274
PANASONIC| 0647 0452 2027 2255 2259 2275
PARAGON| 0250 0450 2255
PHILIPS| 0748 0549 0150 0650 0750 0850 2264 2272
PHILIPS-|
MAGNAVOX| 0152 0055
PIONEER| 0051 0252 0449 0950 2022 2267 2274
Proscan| 2286
PULSAR| 02502255
Quasar RADIO SHACK| 2255

0152 0055 0154

RCA| 0647 0748 0352 1956 2286
REALISTIC| 0548
REGAL| 0849 2261 2263
REGENCY| 0349
REMBRANDT| 0947
ROGERS| 0252 2022
RUNCO| 0250 2255
SAMSUNG SCIENTIFIC ATLANTA| 0049 0051

0451 0351 0252 0155 0852 0248 0251 2022 2257 2274

Sejin| 1988
SHAW| 0752 1965
SIGNAL| 0049
SIGNATURE| 0947
SLMARX| 0049
Sony| 1947 2269
SPRUCER| 0647
STANDARD| 0551
STARCOM| 0453 0747 2256
STARGATE| 0049
STAR SIGHT| 0352
STAR TRAK| 0253
Suddenlink| 1965 2022
Supercable| 2262
TANDY| 0651
TELEVIEW| 0049
TEXSCAN| 0551
Thomson| 1956 2027
TIME WARNER| 0252 1965 2022 2040
Tivo| 2082
TOCOM| 0048 0751 0952 0653
Torx| 2256
---|---
TOSHIBA| 0250 2255
TV86| 0350
UNIKA| 0448 0548 0748
UNITED CABLE| 0747
UNIVERSAL| 0054 0448 0548 0648 0748 0851
VIDEOWAY| 0052
VIEWSTAR| 0149 0150 0350 0651
VIDEO TECH| 0656
VIDEOTRON| 0252
WideOpenWest| 2022
ZENITH| 0154 0250 0748 0753 0853 0951 0953 2255 2266 2268
ZENITH|
NETWORK| 0354

DEVICE SAT/DTV/WEBTV

Note: Can only be programmed under STB mode.

0664 0065
 | 0265 0465 0765 0866 0966 0367 0567 0362 0563 0765
DISH NETWORK| 0167 0366 0464 0862 0067 0460 0560 0660 2310 2311
DISHPRO| 0460 0560 0660 0067
DX ANTENNA| 0458 0859
ECHOSPHERE| 0464
ECHOSTAR| 0167 0366 0464 0862 0067 0460 0560 0660
EXPRESSVU| 0067 0366 0167 0464
FORTEC STAR| 0558 0157 0257 0357 0457 0557
FUJISTSU| 0760 0860
GE| 0265 0566 0365 0863 0966 0666 0766 0866
GEMINI| 0161
GI| 0466 0665 0166 0058 0158 0258 0960 0364 0865 0965 0066
GLOBECAST| 0057
GO VIDEO| 0662
HITACHI| 0465 0564 0664 0864 0765 0362
HUGHES|
NETWORK| 0763 0765 0362 0659 0465 0564 0644 0864
JVC| 0464 0862
---|---
KENWOOD| 0461
LUXOR| 0561
MAGNAVOX| 0259 0862 0565
MACOM| 0661
MITSUBISHI| 0765 0864 0465 0564 0664 0362
MOTOROLA| 0466 0463
NORSTAT| 0761
PACE| 0063 0163 0266
PANSAT| 0060 1406
PANASONIC| 0264 0260 0261
PRIMESTAR| 0364 0665
PHILIPS| 0259 0862 0763 0564 0664 0864 0465 0765 0565 0362
PHILIPS-|
MAGNAVOX| 0259 0862 0565
PIONEER| 0062
PROSAT| 0957
PROSCAN| 0265 0365 0666 0966 0766 0866
RCA| 0265 0566 0365 0863 0467 0966 0666 0766 0866 0411
REALISTIC| 0358 0961
SAMSUNG| 0061 0959 0962 0263 0563
SHARP| 0062
SKY NETWORK| 0063 0163 0266
SIERRA I II III| 0757
SONY| 0963 0367 0567 0160 0861
STARCHOICE 0665 0166 0364
STAR SIGHT| 0964
STAR TRAK| 0462
STS| 0458 0658 0758
SUPER GUIDE| 0562
SYLVANIA| 0759
TOSHIBA| 0765 0864 0465 0564 0664 0362 0858 0064 0164 0764
ULTIMATE TV| 0966 0567
UNIDEN| 0964 0958 0762
UNITED| 0361
VIDEO CIPHER II| 0059
WEB TV| 0862 0160
ZENITH| 0363 0065 0267 0161 0266 0857 0059 0360 0165

PROGRAM CODES

Note: This is a quick reference guide for all the programming codes.

References

• Anderic Official Site | Home | North Carolina

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>