FORAS JR 60 Self-priming Electric Water Pump Instruction Manual
- June 12, 2024
- Foras
Table of Contents
FORAS JR 60 Self-priming Electric Water Pump
Product Information
The JJAA – JJRR elettropompe AUTOADESCANTI SELF-PRIMING electric pumps are efficient and reliable pumps designed for various applications. These self- priming pumps are suitable for both residential and industrial use. They are available in different models and power ratings to meet the specific needs of users.
Product Usage Instructions
Follow these instructions to properly use the JJAA – JJRR elettropompe AUTOADESCANTI SELF-PRIMING electric pumps:
- Choose the appropriate pump model based on your specific requirements and the desired power rating.
- Ensure that the electrical power supply matches the pump’s voltage and frequency specifications (1x230V or 3x400V, 50Hz).
- Install the pump in a suitable location, ensuring proper ventilation and accessibility for maintenance.
- Connect the pump to the water source using appropriate plumbing connections, ensuring proper sealing to prevent leaks.
- Connect the pump to the electrical power supply following local electrical codes and regulations.
- Prime the pump by filling it with water before starting it for the first time or after extended periods of non-use.
- Switch on the pump and adjust the desired flow rate using any available control mechanisms.
- Monitor the pump’s performance regularly, checking for any signs of leaks, unusual noises, or reduced flow rates.
- Maintain the pump as recommended in the user manual, including regular cleaning, lubrication, and inspection of components.
- If any issues or malfunctions occur, refer to the troubleshooting section of the user manual or contact customer support for assistance.
Always prioritize safety when using the electric pump. Follow all safety guidelines provided in the user manual and consult a professional if you are unsure about any aspect of installation or operation.
DIMENSION
A | B | C | D | E | F | H1 | H2 | DNA | DNM | I | L | M | kg | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
JR 60 | 225 | 142 | 395 | 180 | 140 | 200 | 158 | 185 | 1″G | 1″G | 440 | 200 | 225 | 14 |
JA 60 | 225 | 142 | 425 | 180 | 140 | 200 | 158 | 185 | 1″G | 1″G | 440 | 200 | 225 | 15.2 |
JR 80 | 225 | 142 | 395 | 180 | 140 | 200 | 158 | 185 | 1″G | 1″G | 440 | 200 | 225 | 14.4 |
JA 80 | 225 | 142 | 425 | 180 | 140 | 200 | 158 | 185 | 1″G | 1″G | 440 | 200 | 225 | 15.8 |
JA 100 | 225 | 142 | 425 | 180 | 140 | 200 | 158 | 185 | 1″G | 1″G | 440 | 200 | 225 | 17 |
FREQUINECY
Self-priming jet-type electric pumps suitable for suction up to 8-9 m in depth, specifically indicated for pumping water mixed with air and/or gas. Cast iron PUMP BODY; cast iron (series JR 60-80; JA 60-100) or aluminium alloy (series JR 65-85; JA 65-105) BRACKET; DIFFUSER and VENTURI SYSTEM in noryl reinforced with fiberglass (GFN2V); noryl or brass IMPELLER; stainless steel SHAFT; ceramic-graphite MECHANICAL SEAL; closed, self-ventilated induction ELECTRIC MOTOR; Insulation class F; IP44 protection. Standard manufacture: 230V – 50 Hz single-phase, with built-in thermal protection, 230/400 V – 50 Hz three-phase, with electric protection to be provided by the user. Max temperature of pumped liquid; 50°C; max working pressure: 6 bar.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>