truke Fit Pro Power User Manual

truke Fit Pro Power – B121

User Manual

Product Description

Welcome to use truke Fit Pro Power – True Wireless Stereo Bluetooth Earbuds

This product adopts the industry’s advanced single-chip solution, with excellent sound quality and simple operation, which will bring different surprises to your life, work and journey
You can simply connect a single earbud to make a call or listen to the mobile phone navigation tone when you are driving or riding, so that the journey is safe and worry-free.It can also be used in pars (stereo) to enter the wonderful world of music.

Overview

1. Multifunction button
2. Led indicator Red/Blue
3. Charging pins
4. Type-C charging port
5. Battery capacity digital display

Instructions for First Time Use

1. Remove the protective plastic film from charging pins of the earbuds if present
2. Place earbuds back in charging case to charge for 1 hour

Pairing procedure

1. Take out the earbuds form case at same time, both earbuds will start blinking with red and blue led. In few seconds one of the earbud’s red/blue led will stop blinking and other will keep blinking
2. Turn on mobile’s Bluetooth and search for new device. Then select truke Fit pro power, now your Fit pro power earbuds will be paired with mobile and ready to use

General Functions & Operations

Power on| Press and hold the button for 2 seconds to turn it on, the red and blue lights flash
---|---
Earbuds Pairing| 1. Earbuds will automatically start & pair when it is taken out from the charging Case
2. Connected Tone is played when earbuds and mobile phone connect successful
3. Disconnected Tone is played when earbuds and mobile phone is disconnected
Power off| Earbuds turns off automatically when earbuds are placed into the charging case
Both earbuds turn off, when any earbud is pressed for more than 5 seconds
Operating language| English
Bluetooth name| truke Fit pro power
Play / Pause| Press the earbuds button
Call answering| Press the earbuds button
Disconnect incoming call| Press and hold the earbuds button for 2 seconds
Automatic redial function| Double Press Right earbuds button to call back the last call
Earbuds Remaining Battery| Earbuds Remaining Battery will be displayed on supported mobile device
Earbuds Remaining Battery will be indicated with battery capacity digital display with charging case

Low Battery Prompt| Red LED starts flashing when voltage is lower than 3.3v
---|---
Previous & next song| Previous song: Press left earbuds for 2 seconds
Next song: Press right earbuds for 2 seconds
Google Assistant / Siri| Double Press Left Earbud
Call Redial| Double Press Right Earbud
Volume adjustment| Not Supported through Earbuds
Charging indication| Earbuds Charging: The red light of Earbuds is always on while charging
When the earbuds is fully charged, the blue light will be displayed and the blue light will goes out after 30 secondsCharging Case: During the charging process of the charging Case, The Red Light of the LED in the Charging Case is always on and the battery capacity digital display will show charging state.
When the Charging Case Battery is fully charged, the red light turns always on and battery capacity display will display will show charging state

Troubleshooting

1. Unable to start
   Charge the earbuds for 30 minutes and then turn it on

2. Earbuds Cannot Pair
   Go to the mobile’s menu and forget/unpair the truke Fit Pro Power. Pair the device again.

3. Cannot Connect to Mobile Device
   Turn off the earbuds by putting them in charging case. Turn off Mobile Device Bluetooth function then turn it on again. Take out the earbuds from case and connect

4. The earbuds can’t be charged
   Press the button on the case if no led is lit or only one is blinking charge the case first Make sure earbud are placed in case with right orientation, gently press them in place

Performance Parameters

Model Number

Bluetooth version

| B121| Charging input| 5V 1A
---|---|---|---
5.0| Operating Voltage| 3.7V
Talk-Time| 4 hours| Headphone Battery| 40mAh 3.7V
Music Playback Time| 4-5 hours| Charging Case Battery| 2000mAh 3.7V
Standby duration| 72 hours| Charging Interface| Type-C
Net weight| 74 grams| Charging time| Earbuds charging time :27 minutes
Charging case charging time :150 minutes
Waterproof Level| Splash proof| Dimension| Charging Case: 774727mm
Earbuds: 262017mm

*Talk-Time, Music Playback & Charging Time are mentionectlen ideal lab conditions Under daily usage, actual time may vary

Precautions

1. Do not use this product under high temperature, high humidity, high cold, high dust, high electromagnetic radiation and lightning environment
2. Do not use non-original charging accessories to charge
3. Charging time should not exceed 3 hours
4. Recharge every 30 days when not in use for a long time
5. Do not exceed 60 decibels when used for a long time to avoid hearing damage
6. Do not disassemble by any unauthorized personnel, otherwise warranty will be void
7. After the product has expired, it can be sent to a professional recycling agency. Do not discard it at will, so as not to pollute the environment

Customer Care

For any queries/complaints, please feel free to WhatsApp us on +91-9354170767
Or
Write to us at support@eccentricindia.com

Mandatory Registration is required at www.truke.in within 10days of purchase

Thank You

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>