CROSSROPE Wall Mount Instruction Manual
- June 3, 2024
- CROSSROPE
Table of Contents
CROSSROPE Wall Mount
Installation Instructions:
-
Measure and mark the four wall mount holds at the appropriate height and space on your wall.
Recommended mount height is 50″ – 60″ above the floor. -
Drill four pilot holes where marked.
-
Drive a drywall anchor into each pilot hole.
-
Place the wall mount against the wall and line up the holes of the wall mount with the holes on the wall. Drive a screw through each hole. Be careful to not over-tighten.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>