KROAK K-SPE06 Semi Flexible Solar Charging Panel User Manual
- June 4, 2024
- KROAK
Table of Contents
KROAK K-SPE06 Semi Flexible Solar Charging Panel
OVERVIEW
Product usage scenarios:
- The use of products that require energy storage or continuous electric energy, such as RVs, electric vehicles, and yachts:
- It can charge 12V, 24V, 36V, 48V, and other conventional batteries through series and parallel.
- Can power household energy storage in areas without electricity or frequent power oulag0S
- The energy storage tank can be charged.
SOLAR CHARGING PANEL INSTALLATION STEPS
- Clear and clean where the roof is to be pasted
- Apply the self-purchased anti-aging adhesive evenly on the back of the solar energy or the roof position to be installed;
- Naturally press the glued solar panel with the curvature of the installation surface;
- Evenly seal the pasted solar panel with anti-aging silica gel around it
- The degree of adhesion of the solar panel depends on the characteristics of the glue, and the curing time is al least not less than 2 hours before series and parallel connections and wiring can be performed.
ELECTRICAL CHARACTERISTICS
MODEL | K-SPED5 | K-SPED6 | K-SPED8 |
---|---|---|---|
Maximum power(W) | 100 | 150 | 200 |
Working current(A)
|
4.09
|
5.55
|
7.76
Open circuit voltage(V)| 23.5| 24.2| 24.4
Short circuit current(A)| 4.45| 6.15| 8.53
Output
|
MC4 MC4
|
MC4
Panel size (mm)| 1050-346″2.7 10505052.7| *1075675.5
Net weight(KG)| 1.3| 2
Under Standard Test Conditions(STC): irradiance of 1OOOW/m2, Am1.5, and 25
C cell temperature mechanical Characteristics**
OPTIONAL ACCESSORIES
Series line: Parallel line
PRECAUTIONS
-
Allen Install Ing the semi-flexible solar panel, It should be handled gently with both hands. When bending and pasting, it should be bent naturally in the long direction, and should not be bent horizontally;
-
Solar panels should avoid collision with rocks, metal objects, and other sharp objects;
-
Do not bend the solar panel excessively to avoid breaking;
-
Keep the panel surface clean when the solar panel it is in use, and the panel needs to be cleaned from time to time to maintain the high efficiency of solar energy;
-
Solar panels should be kept away from ‘fire and heat sources, and try lo
avoid half-shading and half-exposure to sunlight; -
Strictly implement the 5eries and parallel C011ndon of solar energy: Iha
current of multiple solar panels must be the same when connected In series; the voltage of multiple solar panels must be the same when connected in parallel. The series-parallel mode is determined according to the voltage of the charging battery. In principle, the solar output voltage is 1.5 times the battery voltage -
This product cannot be In contact with strong corrosive objects. The product specifications and information mentioned in this manual are for reference only and may be updated without prior notice. Unless there Is a special agreement, this manual is only used as a guide.
WARRANTY
Product for defects in workmanship and materials within 12 months from data of purchase (excluding normal wear arid tear, alteration, misuse, neglect, accident, damage caused by other services from a non-authorized S81’Yice center. etc.).
- SCHEUFER Technologies GmbH
- Address: Hertleinstrasse 37, 91052, Erlangen, Germany
- E-mail:Mark.Zhang@scheufer.com
- VISHTEC UK Co., Ltd
- Address: Unit G25 Waterfront Studios, 1 DockRoad, London, E16 1AH
- E-mail:Vincent.feng@vish-tec.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>