EZVIZ T2C Door Sensor User Guide

EZVIZ T2C Door Sensor

Product Information

The product is an open/close sensor manufactured by Hangzhou EZVIZ Software Co., Ltd. It is designed to be used with the EZVIZ Smart Gateway. The sensor is used to detect the opening and closing of doors or windows and send notifications to the user’s mobile phone through the EZVIZ App.

Package Contents:

• Open/Close Sensor
• Double-sided Tape
• Quick Start Guide
• RESET Button
• Detector Magnet
• LED Indicator

Basics:
The sensor is equipped with a RESET button, a detector magnet, and an LED indicator. The RESET button is used to put the sensor into device adding mode. The LED indicator provides visual feedback on the sensor’s status.

Product Usage Instructions

Get the EZVIZ App:

1. Connect your mobile phone to Wi-Fi (recommended).
2. Search for “EZVIZ” in the App Store or Google PlayTM and download/install the EZVIZ app.
3. Launch the app and register an EZVIZ user account.

Preparations:

1. Detach the cover of the sensor at the detaching groove.
2. Remove the battery insulation strip as instructed in the figure below.

Add Device:
Method One: Add by Scanning QR Code

1. Login to your EZVIZ account through the app and tap the device adding icon.
2. Scan the QR code on the inner side of the cover or on the user manual to add the sensor to the gateway.
3. Place the sensor in the desired location as shown in the figure below.
4. Replace the cover.

Method Two: Add by the Gateway
Note: When adding the sensor by the gateway, place the sensor as close to the gateway as possible.

1. Refer to the user manual of the gateway to put it into device adding mode.
2. Press and hold the RESET button on the sensor for over 5 seconds until the LED indicator flashes rapidly blue, indicating that the sensor is in adding mode.
3. The sensor will be automatically added to the gateway.

Please refer to the user manual for more detailed instructions and information about using and managing the product.

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezviz.com).

Revision Record
New release – January, 2021
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Overview

Package Contents

Basics

Name: Description

• RESET Button
  • Press and hold the button for over 5s to make the sensor enter
• LED Indicator
  • Fast-flashing Blue: Sensor enters device adding mode.
  • Fast-flashing Blue Once: Door opening/closing signals triggered.

Get the EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for “EZVIZ”.

Preparations

Detach Cover
Detach the cover of the sensor at the detaching groove.

![EZVIZ-T2C-Door-Sensor-4]](https://manuals.plus/wp-content/uploads/2023/08 /EZVIZ-T2C-Door-Sensor-4.png)

Remove Insulation Strip
Remove the battery insulation strip as instructed in the figure below.

• When the battery level is low, the low battery notification will be pushed to the EZVIZ app to remind you to replace batteries.
• If you need to replace batteries, please purchase two CR1632 batteries.
• When replacing batteries, please insert with the positive side facing up.
• Keep your hands dry and clean when touching the circuit board.

Add Device

The open/close sensor should be used along with EZVIZ Smart Gateway (afterinafter referred to as “gateway”). Please add the gateway to the EZVIZ Cloud, and then add the sensor to the gateway by the following two methods.

Method One: Add by Scanning QR Code

1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code scanning interface will be displayed.

2. Scan the QR code on the inner side of the cover or on the user manual, and then add the sensor to the gateway.

3. Place the sensor as displayed in the figure below.

4. Place the cover back.

Method Two: Add by the Gateway
When adding sensor by the gateway, place the sensor as close to the gateway as possible.

1. Make the gateway enter device adding mode as instructed by the user manual of the gateway
2. Press and hold the RESET button for over 5 seconds until the indicator on the sensor flashes rapidly blue, and then the sensor will enter adding mode.
3. The sensor will be added to the gateway automatically.

Installation

• The sensor must be placed away from magnetic field, and when doors or windows are closed, the distance between the sensor and the magnet should be less than 20mm.
• Before sticking the sensor, clean the dust on the surface of the door or window first. Do not stick the sensor on limewashed walls.
• The installation instruction grooves on the sensor and magnet should be placed together and aligned (as displayed in the figure below).
• The installation height does not exceed 1.8m.
• The working temperature range of the sensor is -10°C~55°C.

1. Select a place where the sensor can be installled.
2. Fix the sensor on the place you have selected by the double-sided tape.
3. Press the sensor for about 20 seconds.

BATTERY INSTALLATION and REPLACEMENT

1. Install Battery
   Tear off the battery insulation, put the battery into the baseplate and insert it to the end.

2. Replace Battery
   Remove the battery from baseplate and replace battery with the Lithium Battery CR1632 purchased by a regular manufacturer. Test the device for correct operation whenever the batteries are replaced after re-fitting the device onto the base plate. If the device is not working properly, please add the device and configurate the network again by following the steps in Setup part or directly contact our technical support.

3. Risk of explosion if the battery is replaced by an incorrect type.

4. Improper replacement of the battery with an incorrect type may defeat a safeguard(for example, in the case of some lithium battery types).

5. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.

6. Do not leave the battery in an extremely high temperature surrounding environment or extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.

7. Dispose of used batteries according to the instructions.

8.  identifies the battery holder itself and identifies the positioning of the cell(s) inside the battery holder.

9. “+” identifies the positive terminal(s) of device which is used with, or generates direct current, “-” identifies the negative terminal(s) of device which is used with, or generates direct current.

10. Removable Lithium ion Battery(CR1632)
    
    

Operations on the EZVIZ App

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

Homepage
Launch the EZVIZ app, open the homepage of the related gateway, you can manage your detector as needed on the page.

• Log Detection log of the detector.
• Dismiss Clear alarms of the detector.

Settings

• Parameter Description
• Device Name Customize the name of your device.
• Alarm Settings When enabled, a warning will be issued if the door contact is triggered.
• You can set the notification parameters as needed.
• Linkage Camera Select your camera to connect to the detector. Once connected, the camera will turn to the place when the detector is opened or closed.
• Related Devices You can see the gateway connected to your detector.
• Device Information You can see the device information here.
• Share Share your device.
• Delete Device Tap to delete the detector from EZVIZ cloud.

INFORMATION FOR PRIVATE HOUSEHOLDS

1. Separate collection of waste equipment: Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of waste equipment must dispose of it separately from unsorted municipal waste. In particular, waste equipment does not belong in household waste, but in special collection and return systems.
2. Batteries and rechargeable batteries as well as lamps: Owners of waste equipment shall, as a rule, separate waste batteries and rechargeable batteries that are not enclosed in the waste equipment, which can be removed from the waste equipment without being destroyed, from the waste equipment before handing them in at a collection point. This does not apply if waste equipment is prepared for reuse with the participation of a public waste management authority.
3. Options for returning waste equipment: Owners of waste equipment from private households can return it free of charge to the collection points of the public waste management authorities or to the take-back points set up by manufacturers or distributors within the meaning of the Electrical and Electronics Equipment Law. Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or on a permanent basis and make it available in the market are required to take it back. This also applies in the case of distribution using means of distance communication, if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors shall, in principle, ensure take-back by providing suitable return facilities at a reasonable distance from the respective end user. The possibility of returning waste equipment free of charge exists for distributors who are obliged to take it back, among other things, if a new similar device that essentially fulfills the same functions is delivered to an end user.
4. Privacy Notice: Waste equipment often contains sensitive personal data. This applies in particular to devices of information and telecommunications technology such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the waste equipment to be disposed of.
5. Meaning of the symbol “crossed-out wheelie bin”: The symbol of a crossed-out wheelie bin regularly depicted on electrical and electronic equipment indicates that the respective device is to be collected separately from unsorted municipal waste at the end of its service life.

References

• EZVIZ - Creating Easy Smart Homes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>