OPAL 502481824 31 Inch Tower Fan With Remote Control User Manual
- June 3, 2024
- OPAL
Table of Contents
OPAL 502481824 31 Inch Tower Fan With Remote Control
GENERAL NOTICES
- This device is intended for home use only, to ventilate rooms, and in the manner described in this manual: do not use it for any other purpose. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorised personnel.
- Do not touch the appliance with wet hands or feet.
- Do not insert any tool, or your fingers, into the grille protecting the blades.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- The appliance must be kept out of children’s reach.
- Attention: when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks and physical injury.
- Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, contact professionally qualified personnel.
- Make sure that the appliance is working correctly: if not, turn the appliance off and have it checked by professionally qualified personnel.
- Always unplug the appliance before you assemble, disassemble or make adjustments to the appliance.
- Do not move the appliance when it is operating.
- Unplug the appliance when not in use.
- Do not use the device at room temperatures above 40 °C.
- Do not move the appliance when it is in function.
- Do not leave the device exposed to the weather (sun, rain, etc.).
- Do not pull on the cord to disconnect the plug from the socket.
- If the supply cord is damaged, it must be replaced by the manufacture, its service agent or similarly qualified persons in order to avoid a hazard.
INSTALLATION
- After removing the packing materials, check the integrity of the fan; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger.
- Before connecting the appliance, check that the voltage values shown on the data plate correspond to those of the electricity supply network. In the event of incompatibility between the electric outlet and the plug of the fan, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed power of the fan. In general, the use of adapters or extension cords is not recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less that the maximum of the appliance.
- The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
- To not place the appliance near sinks or other container of liquids (minimum distance of 2 meters) to avoid the risk of it falling in.
- Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
- Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted or wrapped around the appliance.
- Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the appliance could upset).
- In the event of a breakdown or poor operation, turn the fan off and ask for professionally qualified help.
ASSEMBLY
- Attention : the fan can only be used if complete with the support base (base1 and base 2).
- Attention : always unplug the appliance before you assemble.
- To assemble it, refer to figure: positioning first the base1 (D) then the base 2 (E) on the body, making sure to lock with 4 screws supplied (F);
OVERVIEW
- A. Remote control
- B. Switch button
- C. Indicator cover
- D. Base 1
- E. Base 2
- F. Attachment screws
REMINDING : there are 2 corresponding holes at the base, the 2 pillars at
the seat need to pass through these 2 holes when assembly the base onto the
fans.
USE
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with similar qualifications, in order to avoid any risk.
Operation
The fan can be operated by the control panel located on the top of the fan (B) or by remote controller(A)
- Plug the fan into the standard domestic socket.
- Press the ON/OFF button , the fan will start running at LOW speed
- Press the SPEED button to select the desired level, Low, Medium, High, the indicator of speed level is lighted at indicator cover(C).
- Press the MODE button to set the fan as Natural or Sleep mode, the mode is lighted on the indicator cover(C) as NAT, SLE.
- Press the OSC button to allow the fan oscillate the wind direction, to stop the oscillation, press the OSC button again, the maximum angle is 86 degree.
- Press the TIMER button to set the desired auto power off time, the timer is from 1 to 7.5 hours, the interval is 0.5 hour.
- When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention : before normal cleaning, remove the plug from the socket.
- Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
- Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
- It is essential that the motor’s air holes be kept from dust and lint.
- If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its original packaging.
- Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord (after making sure you have disconnected the plug from the socket and make dangerous parts harmless if children are allowed to play with them.
CORD STORAGE
When fan will not be used for long time, the power cord can be wind at the base, the end of cord can be locked by the clip at the back, refer to below picture .
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service. Disposing of a
household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.
SPECIFICATION
- Product： Tower fan
- Model ：502481824, 502481825/PRIMO-RC Power：45W
- Voltage : 220V-240V~50/60Hz
Information requirments
Information requirments
Maximum air flow| F| 18,38| m3/min
Fan Power input| P| 39,30| L
Service value| SV| 0,47| (m3 /min)/W
Standby power consumption| Psb| 0| L
Fan sound power level| Lwa| 60,59| dB(A)
Maximum air velocity| C| 1,89| m/s
Measuring standard of service value| IEC 60879:1986 (corr. 1992)
Contact details for obtaining more information| Kesko Corporation Building and
technical trade
Disposal
Recycling: This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufactured for www.onninen.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>