OPAL CNJ500 EV Charging Cable User Manual
- June 4, 2024
- OPAL
Table of Contents
OPAL CNJ500 EV Charging Cable
TYPES
TYPE 1
Chevrolet Volt, Citroen C-Zero, Fisker Karma, Ford Focus Electric, Ford C-Max Energi, Mia, Mia Electric Van, Mitsubishi-l Miev, Mitsubishi Outlander Phev, Nissan NV200 SE van, Nissan Leaf, Peugeot lon, Renault Fluence, Renault Kangoo, Smiths Edison Van, Smiths Newton, Tata Indica Vista EV, Toyota Prius, Vauxhall Ampera…
Specification
- SAE J1772 to IEC 62196-2 Male Plug
- Degree of protection: 1P66
- Color: Black
- Certificate: TUV, CE
- Current: 16A/32A
- Length: 5m (16.4ft)
- Cable: Straight/ Coiled
- voltage Range: 100V 250V
- Warranty: 1 Year
- Service Life: >50000 times
- Weight: 2.5-3kg
- Withstand Voltage: 2000V
- Insulation Resistance: >1000MO
- Terminal Temperature rise: <50K
- Material: ABS (plugl+TPU (cable)
- Working Temperature: -25C-55°C
- Sealing gasket: rubber or silicon rubber
- Vibration Resistance: Meet JD053.3 requirements
- Contact Pin: Copper alloy, silver or nickel plating
Good To know
- This is a Mode 3 EV charging cable only for EVs with Type 1/ Type 2 inlets. Don’t use it for EVs with other types of inlet.
- Do not use the charging cable if the device is damaged.
- Please follow the user manual to use this device.
- Don’t use it in the water.
- Please do not open up any part of the device by yourself. Please do not disconnect while the charging box is working.
- This product is only for EV charging. Please don’t use it for any other affair, including hauling, binding and soon.
- This cable has complicated internal structure. Any questions, please contact our Customer Service Manager at the first time. Please do not take it apart without any professional technical support.
Security Protection
- Warning and indicator Over temperature protection
- Ground protection Input overvoltage protection
- functions Short-circuit protection
- Output overcurrent protection, Input under voltage protection Charge status detection
KEY FEATURES
About Maintenance
- ln order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within the specified time; the maintenance of the equipment needs to be completed by professionals, with use of qualified and safe maintenance tools.
- The product is carefuly packed in factory. During transportation, strong impact and bumps should be avoided to prevent damage to the outer packaging of the product.
- The product should be placed at an ambient temperature of -25-+55°C with a relative humidity of less than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, it also should be away from rain, snow, wind and sand.
TYPE 2
Audi A3 e-Tron, BMW i3, BMW i8, Chevrolet Spark, Mercedes B Class E-Celi, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche Panamera S PHEv, Renault Zoe, Renault Zoe 2013, Volkswagen e-Up, Volkswagen e-Golf, Volvo V60 PHEV..
Specification
- IEC 62196-2 Female to Male Plug
- Degree of protection: IP66
- Colour: Black
- Certificate: TUV, CE
- Current: 16A/32A
- Length: 5m (16.4ft)
- Cable: Straight/ Coiled
- Voltage Range: 100V -250V
- Warranty: 1 Year
- Service Life: >50000 times
- Phase: Single/Three (Only for straight cable]
- Weight: 2.5-4kg
- Withstand Voltage: 2000V
- Insulation Resistance: >1000MO
- Terminal Temperature rise: <50K
- Material: ABS [plug}+TPU (cable)
- Working Temperature: -25C-55°c
- Sealing gasket: rubber or silicon rubber
- Vibration Resistance: Meet JDQ53.3 requirements
- Contact Pin: Copper alloy, silver or nickel plating
Good to know
- This is a Mode 3 EV charging cable only for EVs with Type 1/ Type 2 inlets. Don’t use it for EVs with other types of inlet
- Do not use the charging cable if the device is damaged.
- Please follow the user manual to use this device
- Don’t use it in the water.
- Please do not open up any part of the device by yourself. Please do not disconnect while the charging box is working.
- This product is only for EV charging. Please don’t use it for any other affair, including hauling, binding and so on.
- This cable has a complicated internal structure. Any questions,
please contact our Customer Service Manager at the first time. Please do not take it apart without any professional technical Support.
Security Protection
- Warning and indicator functions Short-circuit protection
- Output overcurrent protection Input under voltage protection
- Over temperature protection Ground protection
- Input overvoltage protection Charge status detection
KEY FEATURES
About Maintenance
- In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within the specified time; the maintenance of the equipment needs to be completed by professionals, with use of qualified and safe maintenance tools.
- The product is carefully packed in the factory. During transportation, strong impacts and bumps should be avoided to prevent damage to the outer packaging of the product.
- The product should be placed at an ambient temperature of -25-+55°C with a relative humidity of less than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, it also should be away from rain, snow, wind, and sand.
Read User Manual Online (PDF format)
Loading......