OPAL CNH651 LED Light Strip and Rail User Manual
- June 4, 2024
- OPAL
Table of Contents
OPAL CNH651 LED Light Strip and Rail
LED Lighting Strip Operating instructions (GB)
Safety notes
- The user of the device must have read and understood these operating instructions prior to its first use in order to safely implement this device.
- The device must only be used when it functions properly. If the device or part of the device is defective, have it repaired by a specialist.
- Always keep the operating instructions within reach.
- If you sell or pass on the device, you must also pass on these operating instructions.
- Never use the unit in a room where there is a danger of explosion or in the vicinity of flammable liquids or gases.
- Main power voltage and fuse must meet the Technical data specifications.
- If the power cable or the device is damaged immediately pull out the plug. Do not use the device again and dispose of properly.
- Do not bend, crush or pull the cable, protect from sharp edges, oil and heat.
- If the device is not in use make sure the plug is pulled out.
- Do not touch the power connector with wet hands1 Always unplug by pulling the connector, not the cable.
- Do not lift the device using the cable or use the cable for purposes other than intended.
- The power cable may not be shortened.
Storage and transport
Storing
Store the device and any accessories in a dry, well-ventilated place. In case of longer periods without operation, protect the device and its accessories against soiling and corrosion.
Transport
Use the original packaging to ship whenever possible
Troubleshooting
If something stops working …
- DANGER! Danger to life and limb! Improper repairs can result in the product functioning unsafely. This endangers yourself and your environment.
- DANGER! Risk of fatal injury due to electric shock! All work to eliminate possible faults should be carried out with the fuse switch off. All work should be carried out by a qualified electrician.
The product is cuttable by 1 m, but please use a suitable glue e.g. CASCO
contact glue [EAN 7311980114964] the seal the end cap to ensure the protection
[IP requirements] Malfunctions are often caused by minor faults. You can
easily remedy most of these yourself. Please consult the following table
before contacting the vendor. You will save yourself a lot of trouble and
possibly money too.
If you can’t fix the fault yourself, contact your nearest vendor. Please be
aware that any improper repairs will also invalidate the warranty and
additional costs may be incurred.
Technical data
- illuminants 80 x LED/m Length 25m
- Rated voltaic 230V- 50Hz
- Capacity 190W
- Lm/m 668lm/m
- W/m 7.6w/m
- Protection Class II
- Degree of protection IP44 / strip IP65
- CRI >80
- Color Temperature 4000K
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>