OPAL CNJ498, CNJ497 EV Charger User Manual

Table of Contents

TYPE 1 SAE J1772 North American standard Chevrolet Volt, Citroen C-Zero, Fisker Karma, Ford Focus Electric, Ford C-Max Energi, Mia, Mia Electric Van, Mitsubishi-l Miev, Mitsubishi Outlander Phev, Nissan NV200 SE Van, Nissan Leaf, Peugeot lon, Renault Fluence, Renault Kangoo, Smiths Edison Van, Smiths Newton, Tata Indica VistaEv, Toyota Prius, Vauxhall Ampera…
TYPE 2 (IEC 62196-2 EU European standard) Audi A3 e-Tron, BMW i3,BMW i8, Chevrolet Spark, Mercedes B Class E-Celi, Mercedes s50c PHEv, Mercedes SLS Ev, Mercedes Vito E-Cell an, Porsche Panamera S PHEV, Renault Zoe, Renault Zo:2013,Volkswagen e-Up, volkswagen e-Golf, volwo v60 PHEV..

Good to know

This is a Mode 2 EV charging cable only for EVs with Type 1/Type 2 inlets. Don’t use it for EVs with other types of inlet.
This cable has complicated internal structure. Any questions, please contact our Customer Service Manager at the first time. Please do not take it apart without any professional technical support.
Don’t use it in the water.
This product is only for EV charging. Please don’t use it for any other affair, including hauling, binding and so on.

Cautions

Only used for EV charging
Do not use the charging box if the device is damaged
Do not use this device with an extension cord or adapter.
Please do not open up any part of the device by yourself.
Please do not disconnect while the charging box is working.
Please follow the user manual to use this device.

High Compatibility: Available for all EVs with Type 1/Type2 inlet, 100% correctly and effectively
IP65: Its unique waterproof design ensures that you can use it at anytime.
Safety Assurance: Already passed all tests of TUV & CE. Al kinds of protective measures are taken to ensure the safety of every user.
Quick & Easy Operation: Just connect the plug to the EV’s inlet, and the charger will automatically detect the connection status and handshaking protocol, then start charging.
Rugged Enclosure: To present top notch quality, we use brand-new design and solidly build high strength ABS plastic.
The charger is proved to be able to bear the weight of a car.
Intelligent Chip: Automatically repair minor charging problems while charging. The lights will blink in different ways to indicate
different problems to help you know the charging situation right now.

In order to ensure the normal service life of the charger and reduce the risk, maintenance must be performed within the specified time; the maintenance of the equipment needs to be completed by professionals, with use of qualified and safe maintenance tools.
The product is carefully packed in factory. During transportation, strong impact and bumps should be avoided to prevent damage
to the outer packaging of the product.
The product should be placed at an ambient temperature of -40°C+50°C with a relative humidity of less than 95%. The
ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, it also should be away from rain, snow, wind and sand.

Mode 2 Charging Cable is subject to stringent quality inspections. From the day of purchase, any quality problems during using the
equipment correctly within a year can be reflected to the dealer for the after-sales service.
Any incorrectness to handle, install, misuse, repair or neglect caused by the user’s own inaccuracy or any natural damage resulting in direct damage and failure to the product cannot be cOvered by the warranty.
This quality guarantee is only for original buyers.

OPAL CNJ498, CNJ497 EV Charger-fig2

OPAL CNJ498, CNJ497 EV Charger-fig4

OPAL CNJ498, CNJ497 EV Charger-fig5

Failure to follow instructions may result in danger!
Regularly check whether the portable charger has visible damage, there may be an electric shock hazard when using the damaged product
Make sure that all safety facilities are available at all times and test then regularly to ensure safety
If a Ground Error occurs, it must be assumed that the earth wire carries voltage. Please check the circuit and make sure that there is no high-power available in the whole circuit system.
Before powering on the device, please confirm that the device is properly grounded to avoid accidents
Al metal parts should be insulated to prevent short circuit caused by the touch of the tool with the metal frame.
Do not modify, retrofit, or change any part by yourself under any circumstances.
To ensure a stable service life and operation of the charging cable, operation environment should be kept clean and with constant temperature and humidity. The charging cable must not be used in the presence of volatile gas or flammable atmosphere.
Please confirm that the input voltage, frequency, circuit breakers and other conditions of the device have already met the specifications before the device IS powered on.