ANALOG DEVICES LT8304-1 Precision High Voltage High Common-Mode Current Measurement Highest Initial Accuracy User Guide
- June 3, 2024
- Analog Devices
Table of Contents
ANALOG DEVICES LT8304-1 Precision High Voltage High Common-Mode Current
Measurement Highest Initial Accuracy
This document is interactive. You can click on any underlined text to navigate through the document.
Power Solutions for Precision Technology Signal Chains
For the resources
For the individual pages
Non-isolated
Multichannel
PART # DESCRIPTION
- LT8304 1 100VIN Micropower No Opto Isolated Flyback Converter with 150V/2A Switch
- LT3471 Dual 1.3A, 1.2MHz Boost/Inverter in 3mm × 3mm DFN
- LT8570 Boost/SEPIC/Inverting DC/DC Converter with 65V Switch, Soft Start and Sync.
- LT8604 High Efficiency 42V/120mA Synchronous Buck
- ADP7118 20V, 200mA, Low Noise, CMOS LDO Linear Regulator
- ADP7182 – 28V, −200mA, Low Noise, Linear Regulator
POWER REQUIREMENTS
- Note 1: The supply currents indicated are the maximum quiescent current of the supply rails. For overall full load or short circuit current specifications, refer to the datasheets of the signal chain components.
- Note 2: The supply voltages indicated are the values for typical applications.
- Note 3: Consult the corresponding datasheets for details on power dissipation if needed.
- Note 4: The actual supply current requirement shall be multiplied depending on the number of channels on the signal chain.
References
- ADP7118 Datasheet and Product Info | Analog Devices
- ADP7182 Datasheet and Product Info | Analog Devices
- AD7606C-18 Datasheet and Product Info | Analog Devices
- ADHV4702-1 Datasheet and Product Info | Analog Devices
- LT3471 Datasheet and Product Info | Analog Devices
- LT6375 Datasheet and Product Info | Analog Devices
- LT8304 LT8304-1 Datasheet and Product Info | Analog Devices
- LT8570 Datasheet and Product Info | Analog Devices
- LT8604/LT8604C Datasheet and Product Info | Analog Devices
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>