NITECORE MT22C Compact Tactical Flashlight User Manual

MT22C User Manual

Features

• Infinitely variable brightness compact flashlight
• Utilizes a CREE XP-L HD V6 LED · Max output up to 1000 lumens
• Integrated “Precision Digital Optics Technology” provides unparalleled reflector performance
• Boasts a peak beam intensity of 8600cd and a max throw of 185 meters
• Tail switch for tactical application
• Infinite variable brightness adjustment from 0.5 to 1000 lumens
• High-efficiency constant circuit provides unwavering output with runtime up to 500 hours
• Advanced Temperature Regulation module
• Integrated full metal tactical ring
• Two-way titanium plated stainless steel clip included
• Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
• Waterproof in accordance with IPX8 (two meters submersible) · Impact resistant to 1 meter
• Tail stand capability

Dimensions

Accessories

Clip, lanyard, spare O-ring×2, holster, spare tail switch cover, tactical ring

Battery Options

| SIZE| Nominal voltage| Compatible
---|---|---|---
18650 Rechargeable Li-ion battery| 18650| 3.6V/3.7V| Y (Recommended)
Primary Lithium battery| CR123| 3V| Y (Recommended)
Rechargeable Li-ion battery| RCR123| 3.6V/3.7V| Y

Technical Parameters

NOTICE:
The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 1×18650 Li-ion battery (3500mAh). The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.

• Infinite variable brightness adjustment varies from 0.5 to 1000 lumens and is manually adjustable by rotation of the rotary switch. Subsequently, the runtime will vary anywhere from 1 hour to 500 hours depending on chosen level of output. (The runtime for Turbo mode is the testing result before starting temperature regulation.)

Operating Instructions

Battery Installation
Install batteries as shown in the diagram:
NOTE:

1. Ensure the batteries are inserted correctly. The MT22C will not operate if batteries are incorrectly inserted.
2. Avoid direct eye exposure.
3. When the flashlight is kept in a backpack, loosen the tail cap to prevent accidental activation of the flashlight; When it is left unused for extended periods of time, please remove all batteries to prevent battery leakage.
   

Momentary Illumination

When the light is turned off, half-press and hold the tail switch to turn on the light momentarily. Release the switch to turn off the light.

On/Off
To switch ON: Press the tail switch until a “click” sound is heard. To switch OFF: Press the tail switch again until a “click” sound is heard.

Adjusting brightness levels and special mode

When the light is on, rotate the rotary switch in a counterclockwise direction, the MT22C will cycle through Ultralow-TurboStrobe; These modes may be cycled through in reverse by rotating the rotary switch in a clockwise direction. Brightness level from Ultralow to Turbo is infinitely variable.

ATR (Advanced Temperature Regulation)

With Advanced Temperature Regulation module, the MT22C regulates its output and adapts to the ambient environment, maintaining optimal performance.

Changing Batteries

Batteries should be recharged or replaced if any of the following occurs: output appears to be dim or the flashlight becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA/defective products can be exchanged for replacement through a local distributor/dealer within the 15 days of purchase. After 15 days, all defective/malfunctioning NITECORE® products will be repaired free of charge for a period of 60 months from the date of purchase. After 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

1. The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use. (i.e. reverse polarity installation)
3. The product(s) is/are damaged by leakage of batteries.
   For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com

All images, text, and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: Web: info@nitecore.com www.nitecore.com
Address Rm 2601-06, Central Tower, No.5 Xiancun Road,
Tianhe District, Guangzhou,510623, Guangdong, China

Thanks for purchasing NITECORE!
Please find us on Facebook : NITECORE Flashlight
MT020822C19

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>