WOLF Gourmet Stand Mixer User Guide

: June 7, 2024
: Wolf

WOLF Gourmet Stand Mixer User Guide

Welcome

Thank you for your purchase of this Wolf Gourmet product. We look forward to being part of your kitchen for years to come. Wolf is a third-generation family-owned company that has a personal stake in the preparation of your food. With family ownership comes a great attention to detail and an uncompromising dedication to creating exceptional products. Wolf built its business and reputation on helping home cooks to achieve the best results possible. With Wolf Gourmet’s precise control, the dish you envisage will be the dish you serve.

Register your product

We strongly encourage you to register your Wolf Gourmet appliance. It is important to us that you get the most out of your products. By registering you will

Become a Wolf Gourmet culinary insider and receive occasional emails and recipes to help you maintain and enjoy your Wolf Gourmet products.
Have ongoing support from Wolf Gourmet.
Activate your warranty and record your purchase.
Be alerted to any service updates.To register, visit wolfgourmet.com/registration.

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following:

Read all instructions. Failure to follow these instructions, or any misuse of this appliance will cause the potential for fire, electric shock and/or injury to persons.
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
This appliance should not be used by children. Keep the appliance and its cable out of the reach of children.
Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
Cleaning and user maintenance must not be performed by children unless they are supervised.
To protect against risk of electric shock, do not put cable, plug or mixer body in water or other liquid.
Turn the appliance OFF ( ), then unplug from the socket when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull from the socket. Never pull from the power cable.
Avoid contact with moving parts. Keep hands, hair and clothing, as well as spatulas and other utensils, away from attachments during operation to reduce risk of injury to persons and/or damage to mixer.
Remove attachments from mixer before washing.
Do not let the cable hang over edge of the table or worktop or touch hot surfaces, including the hob.
Do not operate any appliance with a damaged power cable or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Power cable replacement and repairs must be conducted by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Contact Customer Service for information on examination, repair or adjustment as set forth in the Limited Warranty.
The use of attachments not recommended or sold by the appliance manufacturer for use with this model may cause fire, electric shock or injury.
Do not use outdoors.
Do not place on or near a hot gas burner or electric ring, or in a heated oven.
Check that the appliance is OFF ( ) before plugging it in. To disconnect,turn the control to OFF ( ); then remove plug from power outlet. To unplug, grasp the plug and pull from the socket. Never pull from the power lead.
Do not use appliance for other than its intended purpose.
CAUTION! In order to avoid a hazard due to the inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the network supplier.
If your plug is provided with a fuse approved by ASTA to BS 1362, it must be replaced with the same colour-coded carrier with the same markings. Fuse covers and carriers can be obtained from approved service agents.
Do not leave the stand mixer unattended while it is operating.
(SAVE THESE INSTRUCTIONS)

Other consumer safety information

This appliance is intended to be used for household and similar applications such as staff kitchen areas in shops, offices and other working environments; farmhouses; by clients in hotels, motels and other residential-type environments; and bed and breakfast-type environments.

WARNING

Electric shock hazard: This appliance is provided with an earthed (3-prong) plug to reduce the risk of electric shock. Do not defeat the safety purpose of the plug by modifying it in any way or by using an adapter. If the plug does not fit into the socket, a qualified electrician should replace the socket.

The length of the lead used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer lead. If a longer lead is necessary, an approved extension lead may be used. The electrical rating of the extension lead must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension lead so that it does not hang over the edge of the counter top or tabletop where it could be pulled on by children or accidentally tripped over.

WARNING Moving parts hazard. To reduce the risk of personal injury, always unplug the mixer before inserting or removing attachments.

Recycling the product at the end of its service life

Dustbin Icon The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in order to reduce any impact on the environment. The user is responsible for returning the product to the appropriate collection facility, as specified by your local regulations. For additional information regarding applicable local laws, please contact the council facility and/or local distributor.

Wolf Gourmet stand mixer parts and features

Wolf Gourmet stand mixer
Behind removable magnetic accessory cover

PARTS AND FEATURES

Mixer head
Removable magnetic accessory cover
Splash/pouring shield
Attachment coupling
Speed control
Bowl lift
Mixer base
Bowl
Accessory lock release button (behind magnetic accessory cover)
Speciality attachment area
Flat beater
Whisk
Dough hook

GETTING STARTED

Before first use

Wash bowl and attachments in warm, soapy water; rinse and dry. Always unplug stand mixer from electrical socket before inserting or removing attachments. Dry
thoroughly. Wipe base with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER. Refer to cleaning recommendations in ‘Care recommendations’.

WARNING : Entanglement hazard. Unplug mixer before inserting or removing attachments. Failure to do so can result in broken bones or cuts.

Using attachments

Before inserting or removing attachments, always make sure stand mixer is unplugged and speed control is set to OFF .

FLAT BEATER

Use the flat beater for most of your mixing needs, from normal to heavy consistency. The flat beater should be used for items such as cake batters, biscuits, pastries, icing, fudge, biscuit batter and potatoes.

DOUGH HOOK

The dough hook should be used for heavy pastries and heavier doughs that require kneading.

WHISK

The whisk is designed to whip liquids, such as egg whites, cream and light cake batters. Use the whisk to incorporate air for whipped cream and meringues. Do not use the whisk for mixing thick mixtures, such as dough, fudge or mashed potatoes, as these could damage the whisk.

Your stand mixer is designed to whisk a minimum of 2 large egg whites or 120 ml (1/2 cup) of cream. Mixing performance is enhanced as the tip of the whisk is immersed into the liquid.

Using the stand mixer

WARNING : Entanglement hazard. Unplug mixer before inserting or removing attachments. Failure to do so can result in broken bones or cuts.

Before inserting or removing attachments, always make sure stand mixer is unplugged and speed control is set to OFF .
Place the bowl into the bowl lift. Rotate the handle anti-clockwise until it lowers into place.
Select desired attachment for recipe. See ‘Mixingguide’ on page 9. Insert the attachment into the attachment coupling and press upwards. Turn the attachment anti-clockwise until it locks into place on the attachment coupling.
To raise the bowl, rotate the bowl handle clockwise until it lifts and locks into the raised, mixing position.
Attach the splash/pouring shield to the bowl by positioning the open end around the attachment and placing it securely on the bowl.
Plug stand mixer into power outlet.
Rotate the speed control dial to the desired setting.
Use pulse to incorporate unmixed ingredients or to loosely disperse dried fruits, chocolate chips, sweets or nuts in a batter or dough. The pulse feature can also be used to slightly move the attachment when needed to thoroughly scrape down the sides ofthe mixing bowl.
When you have finished mixing, rotate the speed control to OFF . Unplug from the power outlet.
Lower the bowl by rotating the bowl handle anti-clockwise until it lowers and stops. Remove the splash/pouring shield. Remove the attachment by pushing upwards into the coupling and turn clockwise to unlock. Pull down to remove.
To remove the bowl, lift the bowl out.

MIXING GUIDE

The following mixing guide is a suggestion for selecting mixing speeds. Begin on setting 1 and increase to desired speed, depending on the recipe consistency.

ATTACHMENT

|

FOOD

|

SETTINGS

---|---|---

Dough hook

|

Bread

|

1–3

Flat beater

|

Cakes (mixes and from scratch)

|

2–5

Flat beater

|

Biscuit batter

|

2–5

Flat beater

|

Mashed potatoes

|

4–6

Flat beater

|

Butter icing

|

4–6

Whisk

|

Egg whites (for meringues, etc.)

|

8–10

Whisk

|

Whipped cream

|

10

STAND MIXER TIPS

GENERAL MIXING TIPS

Place liquid ingredients into bowl first and then add dry ingredients.
Always stay near stand mixer during use.
To begin mixing, use the lower speed settings until the ingredients are thoroughly combined. This will reduce splattering.
Always add ingredients as close to the sides of the bowl as possible, not directly into the moving attachment.
Mixtures containing large amounts of liquid ingredients should be mixed at lower speeds to avoid splashing. Increase speed only after the mixture has thickened.
When mixing thin batters, use medium speeds and frequently stop the mixer to scrape the sides of the bowl with a spatula.
Ensure butter or margarine is at room temperature before adding to the mixer.
Add ingredients one at a time, thoroughly mixing after each addition.
Add flour a bit at a time.
If a spoon or other tool is accidentally caught in an attachment or the motor stalls, turn the speed control to OFF ( ), then unplug.

EGG WHITES

Place egg whites in a clean, dry mixing bowl. Attach bowl and whisk. To avoid splashing, gradually turn speed control to desired speed. See chart below.

AMOUNT	SETTING
2 to 8 egg whites	up to 10
10 or more egg whites	up to 8

Your stand mixer beats egg whites quickly. Watch it carefully to avoid overbeating. Here is what to expect:

Frothy: Large, uneven air bubbles.
Begins to hold shape: Air bubbles are fine and compact; product is white.
Soft peaks: Tips of peaks fall over when the whisk is removed.
Almost stiff: Sharp peaks form when whisk is removed, but whites are still soft.
Stiff but not dry: Sharp, stiff peaks form when whisk is removed. Whites are uniform in colour and glisten.
Stiff and dry: Sharp, stiff peaks form when whisk is removed. Whites are specked and dull in appearance.

WHIPPED CREAM

Pour cold whipping cream into chilled bowl. Attach bowl and whisk. To avoid
splashing, gradually turn to designated speed and whip to desired thickness. See chart below.

AMOUNT	SETTING
up to 946 ml (2 pints)	up to 10
946+ ml (2+ pints)	up to 8

Your stand mixer whips cream very quickly. Watch cream closely during whipping because there are just a few seconds between whipping stages. Look for these characteristics:

Begins to thicken: Cream is thick and custard-like.
Holds its shape: Cream forms soft peaks when whisk is removed. Can be folded into other ingredients when making desserts and sauces.
Stiff: Cream stands in stiff, sharp peaks when whisk is removed. Use for topping on cakes or desserts, or filling for cream puffs.

Care recommendations

WARNING : Electric shock hazard. Do not immerse mixer, cable or plug in water or any other liquid.

BEFORE CLEANING

Make sure stand mixer is unplugged and speed control is set to OFF .
Remove the attachment by pushing it upwards into the attachment coupling. Turn the attachment anti-clockwise until it unlocks. Pull down and remove.

CLEANING|
---|---
Base, control panel, lead| Wipe with a damp cloth or sponge. Do not use abrasive or corrosive cleaners.
Bowl| For best results, we recommend hand-washing the bowl. Rinse and dry thoroughly.
Flat beater, dough hook, whisk, splash/ pouring shield| These items can be washed in a dishwasher.

NOTE: The splash/pouring shield is dishwasher-safe, in the top rack only. DO NOT use the high temperature/intensive setting when washing in the dishwasher. A high temperature/intensive cycle could damage the product. Parts may also be washed with hot, soapy water. Rinse and dry thoroughly.

Troubleshooting

Food is not mixed.

Place liquid ingredients in the bowl before adding dry ingredients.
Stop stand mixer and scrape sides of bowl.
Increase speed.

Food splatters during mixing.

Mixtures containing large amounts of liquid ingredients should be mixed at lower speeds to avoid splashing. Increase speed only after the mixture has thickened.

Stand mixer ‘walks’ (moves) on worktop during mixing.

Reduce speed.
Reduce quantity of ingredients in bowl.
Make sure worktop is clean. This allows the mixer feet to grip the worktop and reduce stand mixer movement.

Stand mixer shuts off during use.

There is a 30-minute auto shut-off feature.
Stand mixer has overheated. Turn off, unplug and wait for 15 minutes before using.
Mixing implements have become obstructed. Turn off, unplug and remove obstruction.

Wolf, Wolf & Design, Wolf Gourmet, W & Design and the colour red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great America Kitchens, The Fine Art of Kitchen Design and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. All other trademarks or registered trademarks are the property of their respective owners in the United States and other countries.

Wolf Gourmet residential limited warranty

FOR RESIDENTIAL USE

APPLIANCES, COOKWARE AND CUTLERY PURCHASED AND USED OUTSIDE OF MEXICO

To obtain a copy of the written warranty for your Wolf Gourmet product, please visit our website at wolfgourmet.com/warranty.

Accessories

GENERAL INFORMATION

The Wolf Gourmet stand mixer and Wolf Gourmet stand mixer accessories are designed to work exclusively with each other. The attachments are all designed with a keyed coupling and locked with a steel pin. This prevents any incorrect assembly, slipping or binding of the accessory once it is locked in place. It also ensures that there is no change in performance even after multiple uses.

The power for ALL accessories comes from the Wolf Gourmet stand mixer. No other coupling or power source is recommended when running any of the accessories.

Removable magnetic accessory cover
Remove cover to access speciality attachment area
Behind removable magnetic accessory cover

GENERAL INSTRUCTIONS

WARNING : Moving parts hazard. To reduce the risk of personal injury, always unplug the mixer before inserting or removing attachments.

To attach:

Before inserting or removing attachments, always make sure the stand mixer is unplugged and the speed control is set to OFF .
Remove the magnetic accessory cover on the Wolf Gourmet stand mixer to access the speciality attachment area.
Insert the gear end of the housing at an angle, aligning the tabs with the hub of the speciality attachment area. Turn the housing anti-clockwise until it locks into place.

To remove:

Press the release button and turn the housing clockwise to remove from the stand mixer.
Hold the housing, turning the collar clockwise to remove.
Replace the magnetic accessory cover.