KLUS JAZ mounting Instructions
- June 7, 2024
- KLUS
Table of Contents
JAZ mounting instructions
Parts needed to mount the JAZ extrusion
| Extrusion (A)
---|---
| LED strip (B)
| Hanger (C)
| Cover (D)
| End cap (E)
Tools needed for mounting :
– drill
NOTE! All LED strips must be connected to a 12 V or 24 V power supply.
IMPORTANT: The manual presents the simplest mounting procedure.
More mounting procedures and related accessories can be found at
klusdesign.com
Drill a hole in the extrusion (A) to feed the power cable.
cross-section
top view
Mount the LED strip (B) in the extrusion.
Suspend the extrusion using the hangers (C) and a chosen suspension system. The hanger manual can be downloaded at klusdesign.com
cross-section
top view
Connect power to the LED strips. Insert the cover (D) and the end caps (E).
References
- Klusdesign.com | Manufacturer of LED Extrusions, LED Profiles, and new LED Lighting integration designs - KLUS LLC
- Klusdesign.com | Manufacturer of LED Extrusions, LED Profiles, and new LED Lighting integration designs - KLUS LLC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>