DENVER Smart Watch Instruction Manual
- June 7, 2024
- Denver
Table of Contents
DENVER Smart Watch Instruction Manual
Thank you for choosing our product. Please read the instructions carefully before use.
Get started
1. Turn On
Automatic turn-on after charging.
2. Download and Install Denver SW-350 APP
Download “Denver SW-350” app from App Store or Google Play, and install it on
your smartphone.
Note: System requirements are as below
iOS 9.0 and above
Android 4.4 and above
Bluetooth 4.2
3. Connect to smartphone correctly.
4. Bind the Watch
Slide down on the home screen of the app to display the binding request. Select the product model, and tap “Confirm Binding” to complete binding.
Use Instructions
1. Activate Sports
Enter the Sports interface, slide up or down to select a sports item, and tap the icon to start sports.
2. Start Sports
When Sports is activated, the Watch will show sports countdown. Sports starts after the countdown
3. Operations during Sports
4. Reminder about heart rate during sports
During sports, the Watch will continuously detect current heart rate. If the current heart rate exceeds the maximum heart rate, the Watch will remind you to reduce sports intensity or stop sports through vibration and alarm information. Set your safe heart rate reminder through More > Heart rate zone
User defined max. heart rate in the mobile app
5. Pause or stop Sports
Pause sports
In the screen unlocking state, press and hold the UP button to pause sports.
Tap the Continue icon to resume sports
In the pause state, slide the screen up to view the current sports data
Stop sports
In the pause state, select the stop icon to stop sports
After sports, the Watch will keep details of the sports. View sports details in sports records.
Other Functions
1. Health Data
2. Notifications
Turn on smart reminder.
When it is in use, you need to turn on “Smart Reminder” on the app. Select your desired notification types for activation. This function requires the connection between the Watch and your smartphone.
View message
When receiving message, the Watch will vibrate for reminder.
If the message is not immediately viewed after being received, slide the screen down to view the message.
Delete message
The Watch can save the most recent 12 notifications. Beyond the limit, the
earliest notice will be automatically deleted once a new notification is
received.
When the notification contents exceed one screen, it will be displayed
continuously on the message list interface. Slide left a single message box to
display the Delete icon, and tap the Delete icon to delete the message.
Slide down from the top of message list, and tap the Clear icon to clear all messages.
3. Heart Rate
The Watch supports heart rate detection. Slide to the heart rate interface,
hold down the interface screen for two seconds, the Watch will
automatically detect your heart rate. Stand still during the detection, so
that the Watch can output more accurate heart rate data
Note: To improve the accuracy of heart rate detection, wear the Watch correctly and keep clean the part in contact with your skin.
4. Weather
Weather function allows you keep track of the weather in your city. Weather data is obtained through mobile phone network, so it requires the connection between the Watch and the phone to timely update weather data.
5. More functions
Stopwatch
You can record multiple times of stopwatch.
Timer
You can set count-down. The Watch vibrates for reminder after the count-down
is over.
Alarm
You can set alarm through the mobile app.
When the alarm time comes, the Watch vibrates for reminder. The vibration will last 20 seconds if the alarm is not switched off. The vibration occurs again as alarm after 5 minutes. Press the UP/DOWN button to pause the alarm, and after 5 minutes the alarm will remind again. Press UP/DOWN button to turn off the alarm reminder
Call reminder
Call reminder can be set through the mobile app. Turn on Call Reminder function and keep the connection between the Watch and the phone. When there is an incoming call, the Watch will vibrate for reminder.
Close the call pop-up by pressing the UP/DOWN button. Press UP/DOWN button to reject the call.
6. Control center
DND mode
Slide up once on the dial interface to enter the control center interface. Tap the
DND icon lighten the icon ( ). DND mode is on. Tap the DND icon again to
dim the icon ( ). DND mode if off
Brightness adjustment
Slide up once on the dial interface to enter the control center interface.
Brightness level is set as Level 2 by default. Tap the brightness icon ( ) to toggle brightness levels among Level 1, Level 2 and Level 3.
System settings
Slide up once on the dial interface to enter the control enter interface, and tap
the System Setting icon ( ) to enter the System settings.
You can make the following settings through the System settings.
Dial settings: Tap and enter this function to switch different dialing ways.
Pressing and holding UP button: tap and enter this function to set sports
style through pressing and holing UP button.
Factory data reset settings: tap to enter the factory data resetting
procedure.
Firmware information: tap and enter to view firmware information and Bluetooth
address.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
http://www.denver-electronics.com/
Electric and electronic equipment and included batteries contains materials,
components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric and
electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol, seen above. This symbol signifies that
electric and electronic equipment and batteries should not be disposed of with
other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at
recycling stations and other collection sites, or be collected from the
households. Additional information is available at the technical
department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type SW-350 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: http://www.denver-
electronics.com/ and then click the search ICON on topline of website. Write
model number: SW-350. Now enter product page, and red directive is found under
downloads/other downloads.
Operating Frequency Range:
Max Output Power:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics