cameracd Webcam User Guide

: June 7, 2024
: cameracd

Table of Contents

Cameracd X4 Webcam Quick Start Guide
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cameracd X4 Webcam Quick Start Guide

Cameracd X4 Webcam

X4 WEBCAM Manual

Product Brief:

Thank you for choosing our WEBCAM. This is Webcam for real-time data transmission to PC via USB port. It has the advantages of high resolution, fast transmission rate, beautiful appearance, easy to carry etc.

System Requirements

Hardware requirements: Desktop and laptop computers with USB ports, Pentium 200 or higher CPU

Operation system:

Windows XP/ VISTA/ Win7/ Win8/ Win10
Linux 2.6.24 and above/ Ubuntu
Mac OS 10.6 and above/ Android5.1 and above
Over 500MB available hard disk space
4GB or higher RAM memory; CPU processor 2.0GHz or higher frequency
Supports Direct X VGA graphics card

Product diagram

❶ Light Mode control button(Three modes: warm light, white light, warm white light)

‘a’ button: Short press this button to switch the fill light mode in turn(Long press to turn off light).
‘b’ button: Short press this button to switch the light brightness, 5 brightness modes are available(20%, 40%, 60%,80%,100%).

❷ Fill light

❸ 360 ° Omnidirectional dual MIC

❹ Status indicator

❺ 4MP Full HD camera

❻ Universal rotating base

❼ Tripod Screw Hole

❽ Adjustable universal clip / base

❾ USB Cable

❿ User Manual

Product information and parameters

Full HD COMS color sensor, maximum resolution is 4MP, but the real output depends on the application

Interface: USB 2.0 port(Compatible USB3.0)

Image focus: 50cm to infinity

LED light: Warm light, white light, warm white light

Status indicator: Yes

Microphones: Omni Directional Microphones

Specification of tripod screw hole: 1/4″ standard screw hole

Webcam Installation

Place the camera
Place the camera where you want it on the computer monitor, desktop or tripod.

Note: This product does not include a tripod, please purchase separately if necessary.
Place on monitor to install:
Open the camera mounting clip, follow the steps and methods shown in the figure to place the camera above the display, make sure the camera is securely installed.
Connect Webcam
Connect camera to computer via USB interface.
Tips:
When using a desktop computer, highly recommend connect the camera to the back side USB port.
When installation is completed, you can start using.
NOTE:
Do not use in hot, cold, dusty or humid environments.
Avoid touching the lens with your hands, sharp or rough objects, please use a clean and soft cloth for cleaning.
Try to avoid dropping the product. Severe falls may cause damage to the lens, old seals or scratched surfaces.
If your computer (laptop) has a built-in camera, you need to change the default camera settings. For example, change the default camera in the chatting software setting!