Paulmann 946.86 Gartenspot Plug and Shine Pike Instruction Manual
- June 12, 2024
- Paulmann
Table of Contents
Paulmann 946.86 Gartenspot Plug and Shine Pike
Product Information
Product Name: Unknown (not mentioned in the text) Product
Code: 946.86 PH07/22 IP
Rating: IP65 Energy
Efficiency Rating: A++
Compliance: 874/2012, 2019/2015 Maximum Load
Capacity: 150W
Control Box: Included Remote
Control: Not included
Additional Accessories:
- Paulmann Art.-Nr. 180.11 Control Box
- Paulmann Art.-Nr. 939.99 ZigBee Control Box (not included) –
- Paulmann Art.-Nr. 500.67 ZigBee Remote Control (not included)
Product Usage Instructions
-
Installation: – Before starting the installation, ensure that the product is suitable for the intended use and location. – Refer to the symbols guide available at www.paulmann.com/symbols for additional information. – Install the product according to the provided installation instructions.
-
Connecting the Control Box: – Locate the control box included with the product. – Connect the control box to the power supply according to the provided instructions. – Ensure that the control box is securely connected.
-
Powering On: – Once the control box is connected to the power supply, turn on the power source. – The product will enter standby mode.
-
Controlling the Product: –
To control the product, use the remote control (not included) or any compatible ZigBee remote control. – If using the included remote control, ensure that it is within the recommended operating range. -
Additional Accessories: – If desired, you can enhance the functionality of the product by using additional accessories such as the Paulmann Art.-Nr. 939.99 ZigBee Control Box and Paulmann Art.-Nr. 500.67 ZigBee Remote Control (not included). 6.
Maintenance and Safety:
Regularly inspect the product for any damage or signs of wear. – Follow the recommended maintenance procedures provided in the user manual. – Ensure that the product is used in compliance with all applicable safety regulations. For more detailed information and troubleshooting, please refer to the complete user manual available at www.paulmann.com/symbols.
WHAT IS IN THE BOX
INSTALLATION
Replaceability
(1) Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire. (2) Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire. (3) Light source or (6) operating device is not replaceable, the luminaire must be replaced.
This product contains a light source with energy efficiency class
Paulmann Licht GmbH Quezinger Feld 2 31832 Springe Germany
www.paulmann.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>