Installation of Radiator Thermostat Adapters Print
- June 7, 2024
- Aeotec
Table of Contents
This page shows how to install the enclosed adapters of [Radiator Thermostat] correctly and forms a part of the larger Radiator Thermostat user guide.
Table of Contents.
1. Remove the old thermostat.
2. RA Adapter.
3. RAVL Adapter.
4. RAV Adapter.
5. Installing Aeotec Radiator Thermostat.
6. Adapter list.
1. Remove the old thermostat.
1.1 Remove the old thermostat according to the manufacturer’s instructions.
1.2 Now you can see which valve you have and which adapter you need.
Supplied Adapters
- Section 2 – RA Adapter
- Section 3 – RAVL Adapter
- Section 4 – RAV Adapter
An overview of which adapter you need and how you can install them can be found in sections 2 – 4 below.
2. RA Adapter
Picture 1. Danfoss RA Valve
Picture 2. RA Adapter
2.1. Spread the RA Adapter and push it on , the adapter is to be inserted behind the bead into the engage notches.
2.2. Mount the locking screw and screw it tight as you see in the image below (picture 3).
Picture 3. Installed RA Adapter
Picture 4. Cross-section cut RA Adapter for view
3. RAVL Adapter
Picture 5. Danfoss RAVL Valve
Picture 6. RAVL Adapter
3.1 Spread the adapter and slide it over the valve to the rear.
Note: If the controller does not find sufficient support on the valve, we recommend the use of brass adapters.
Picture 7. Installed RAVL Adapter
4. RAV Adapter
Picture 8. Danfoss RAV Valve
Picture 9. RAV Adapter and Pin
4.1 Spread the adapter and slide it over the valve to the rear. The adapter must engage audibly. (click)
4.2 Install safety screw if necessary.
Note: The locking screw only secures the adapter against slipping down and therefore does not have to be fully tightened. Overtightening compresses the adapter and reduces its external thread size (M30 x 1.5).
4.3 Push the pin onto the valve stem as far as it will go.
Note: If the pin is too long, it can be shortened.
Picture 10. Installed Adapter
5. Installing Aeotec Radiator Thermostat.
5.1 Now screw the Aeotec Radiator Thermostat onto the valve using the metal ring.
6. Adapter list.
Manufacturer
|
Mounting
|
Adapters
|
Order number
|
Description
---|---|---|---|---
Armalbjkhg
|
Thread M 24 x 1,5
| unavailable|
|
BRV| Thread M30 x 1,5| unavailable|
|
Circo|
|
|
| see Vaillant
Comap| Thread M 30 x 1,5| not required|
|
Comap (Diana)| Thread M 28 x 1,5| available|
700 100 007
|
Danfoss RA
|
20 mm or 23 mm
with 4 notches
|
enclosed (plastic)
|
|
RAW
Danfoss RA
|
20 mm or 23 mm
with 4 notches
|
available (brass)
|
700 100 005
|
Danfoss RAV
|
34 mm with 4 notches
|
enclosed (plastic)
|
|
is used by Buderus among others
Danfoss RAV
|
34 mm with 4 notches
|
available (brass)
|
700 100 008
|
Danfoss RAVL
|
25,5 mm with 4 notches
|
enclosed (plastic)
|
|
Danfoss KV-Ventil, too
Danfoss RAVL
|
25,5 mm with 4 notches
|
available (brass)
|
700 100 003
|
Diana
|
|
|
|
➔ see Comap
Fratelli Pettinaroli
|
Thread M 28 x 1,5
|
unavailable
|
|
Gampper
|
27 mm with 12 notches
|
unavailable
|
|
Gampper
|
M 20 (6) up to 10 mm depth
|
available
|
700 100 012-1
|
Gampper
|
M 20 (2) up to 10 mm depth
|
available
|
700 100 012-2
|
Gampper
|
M 22 (1) up to 10 mm depth
|
available
|
700 100 012-3
|
Giacomini
|
ca. 22,6 mm
|
available
|
700 100 009
|
Heimeier| Thread M 30 x 1,5
| not required
|
|
Herz| Thread M 28 x 1,5
| available
| 700 100 004|
Honeywell-Braukmann| Thread M 30 x 1,5
| not required
|
|
Idmar| Thread M 30 x 1,5
| not required
|
|
Ista|
Thread M 32 x 1,0| available
| 700 100 013|
Jaga| Thread M 30 x 1,5
| not required
|
|
Junkers| Thread M 30 x 1,5
| not required
|
|
Kosmia| Thread M 28 x 1,0
| unavailable
|
|
Landis&Gyr “Duodyr”| Thread M 30 x 1,5
| not required
|
|
Markaryds| Thread M 28 x 1,5 MMA
| available
| 700107 |
Meges
| Thread M 38 x 1,5
| available
| 700 100 014|
Mertik Maxirol| Thread M 30 x 1,5
| not required
|
|
MNG| Thread M 30 x 1,5
| not required
|
|
MNG-Pin| plastic cap
| available| 700 100 018|
Ondal| Thread M 38 x 1,5
| available
|
|
Ondatherm|
|
|
| see Ondal
Orkli| Thread M 28 x 1,0
| unavailable|
|
Oventrop
| Thread M 30 x 1,5
| not required
|
|
Oventrop
| Thread M 30 x 1,0
| available
| 700 100 002| 15 Years old
Oventrop Winkeladapter
| Thread M 30 x 1,5
| available
| 700 100 017|
Oventrop „maxi/mini“
| Thread M 40 x 1,5
| unavailable
|
|
Polytronic
| Thread M 34 x 1,5
| unavailable|
|
R.B.M.
| Thread M 30 x 1,5
| not required
|
|
Remagg
| Thread M 28 x 1,5
| unavailable|
|
Rossweiner| Thread M 33 x 2,0
| available
| 700 100 016
|
Rotex| approx. 25.8 mm plastic
| unavailable
|
|
Rotex, Rieger
| Plastic thread M 30 x 1,0| unavailable
|
|
SAM btw. Slovarm
| Thread M 28 x 1,5
| unavailable|
Schlösser
| Thread M 30 x 1,5
| not required
|
|
Siemens| Thread M 30 x 1,5
| not required
|
|
Simplex| Thread M 30 x 1,5
| not required
|
|
TA| Thread M 28 x 1,5
| available| 700 100 006|
Tiemme| Thread M 30 x 1,5
| not required
|
|
Valliant| 30,5 mm | available
| 700 100 001|
Valf Sanayii
| Thread M 30 x 1,5
| not required
|
|
Valvex| Thread M 30 x 1,5
| unavailable
|
|
Vama| Thread M 27 x 1,0
| available
| 700 100 015|
VEB Mertik| Thread M 33 x 2,0
| unavailable|
|
Watts| Thread M 30 x 1,5
| not required
|
|
Wingenroth (Wiroflex)
| Thread M 30 x 1,5
| not required
|
|
Zehnder (new)| Thread M 30 x 1,5
| not required
|
|
Zehnder| Thread M 30 x 1,0
| not required
|
| 15 Years old
Zentra| Thread M 40 x 1,5
| unavailable|
|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>