Shenzhen Chongmi Intelligent Technology CM-X1 Mofinder GPS Tracker User Guide
- June 6, 2024
- Shenzhen Chongmi Intelligent Technology
Table of Contents
Shenzhen Chongmi Intelligent Technology CM-X1 Mofinder GPS Tracker
Package Content
Overview
X1 tracker adopts unique algorithm and electromagnetic wave technology, which
can be completely separated from the mobile phone app. The relative direction
and distance of the tracked equipment are displayed on the screen of the
controller, so as to get rid of the original trouble of viewing the position
on the app map, and find the tracked equipment conveniently and quickly with
one click
Product View
- LCD
- Function keys
- LED
- Rester
- On/off key
- Cherge
- On / off key
- LED
- Rester
- Speaker
Pre-use Settings
-
Download APP
Scan QR coda to download and install Mofinoder X1 APP. You could also download it from Apple App store or Google play directly by searching Mofinder X1 -
User Registration
Open Mofinoder X1 APP click ” Register”, enterpersonal email to obtain a verification code.Check your email and enter the verificationcode you received. Finalize the registration bycreating password. -
Connect devices
- Open APP taps the menu button on the upper left and tap “+” button.
- Follow APP Guide to complete binding procedure.
- Tap “Device ” to check the connection
-
Control and view
- Through GPS positioning, the controller can view the actual distance and direction of the tracker.
- Turn on voice or light control through multi-function keys
-
Installation
Product InstallationGently press Tracker down to theconcave side of loop, Attachband to the loop as shown in thepicture and start tracking
Light indication
| Indicator | red | green | Blue |
|---|---|---|---|
| charge | Blinking Red Light | ||
| GPS positioning | Blinking Blue Light 1s\1tim | ||
| GPS positioning succeeded | Blinking Blue Light 5s\1tim |
Data communication
succeeded
| | Blinking Blue Light|
Battery capacity<10%| Blinking Red Light| |
Night light display| Blinking| Blinking| Blinking
Power on| Blinking 1s| Blinking 1s| Blinking 1s
Power off| Blinking 3s| |
Contact
Note : Please go to “Help Center” for more advanced functions, you could
also scan the following QR code for detailed video guides:
Contact:Tel ：+1-201-657-5353
Email : Mofinder@gmail.com
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment