Nitecore NU05 MI Mini IR Signal Light User Manual

Nitecore NU05 MI Mini IR Signal Light User Manual

Features

• Utilizes 4 x high performance LEDs
• Available with IR light (wavelength 940nm) and green light of totally 4 modes
• Powered by the built-in Li-ion battery with a max runtime of 20 hours
• Built-in Li-ion battery charging circuit with a Micro-USB port
• Single switch design allows for one-handed operation
• A power indicator within the body indicates the remaining battery power (Patent No. ZL201220057767.4)
• Lightweight bracket included with hook-and-loop attachment on the back
• Made from durable PC materials
• Ultra light and compact design
• Impact resistant to 1 meter

Q &A:

Q: How can we tell whether the IR modes of the NU05 MI is turned on without night vision devices?
A: Short press the Power Button.

• If the red indicator slowly flashes 1-3 times (Power Indication), it indicates that the NU05 MI is
• If the red indicator quickly and continuously flashes for 3 seconds before going off, it indicates that the NU05 MI is in the IR Flashing
• If the red indicator is constantly turned on for 3 seconds before going off, it indicates that the NU05 MI is in the IR Beam mode.

Accessories

Bracket, USB Charging Cable

Specifications

Dimensions:           67.33mm×34mm×25.9mm (2.65”×1.34”×1.02”) (Bracket Included)
Weight:                   22g (0.78oz) (Bracket Included) 10.5g (0.37oz) (Bracket Not Included)

Technical Data

 | IR Flashing| IR Beam| Green Flashing| Green Beam
---|---|---|---|---
Output| ─| ─| 5Lumens| 5Lumens
Runtime| 18h| 3h15min| 20h| 6h
Impact Resistance| 1m
Water Resistance| IP66

Note: The stated data is measured using the built-in Li- ion battery (120mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Charging Function

Charging Function

NU05 MI is equipped with an intelligent charging system. Please charge the battery before the first use.
Connecting to the External Power: As illustrated, uncap the charging port and use the USB cable to connect an external power supply (e.g. a USB adapter, a computer or other USB charging device) to the Micro- USB port to begin the charging process.
Charging Indicator: While charging, the built-in charging indicator will be steadily glowing red. The battery is fully charged when the charging indicator turns green.

• The charging time is 1.5h.
• The standby time is up to 12 months if the battery has been fully charged.
• During the charging process, the NU05 MI can still be turned on. (The indicator will keep constantly on and will not indicate the selected )

Mode Indication

The NU05 MI is available with 4 modes including IR Flashing, IR Beam, Green Flashing and Green Beam. The access of IR modes is indicated by the red indicator as IR light is invisible to the naked eyes.

seconds before going off
(Short pressing the Power Button can indicate the working status again)
Turning off the IR Flashing Mode| Flashes once
Turning on the IR Beam Mode| Constantly turned on for 3 seconds before going off (Short pressing the Power Button can indicate the working status again)
Turning off the IR Beam Mode| Flashes once
Turning on/off the Green Flashing/ Beam Mode| No indication

Operating Instructions

On / Off

On: When the light is off, long press the Power Button to turn it on and access the IR Flashing Mode.
Off: When the light is on, long press the Power Button to turn it off.

Mode Switching

When the light is on, short press the Power Button to cycle through “IR Flashing – IR Beam – Green Flashing – Green Beam”. (Please proceed with the mode switching before the indicator goes off when in the IR modes)

Power Indication

When the light is off, short press the Power Button and the power indicator will flash slowly to indicate the remaining power of the battery:

1 Flashing three times indicates that the power is above 50%;
3 Flashing once indicates that the power is below 10% and near depletion.

Cautions

1. Please charge the battery before the first
2. Please recharge the product every 3 months when left unused for a prolonged time.
3. DO NOT direct the beam to the naked
4. The product contains small assembly parts. Please keep it away from children to avoid danger of choking or
5. DO NOT disassemble, modify or reconstruct the product, otherwise the warranty will be nullified, and the product might be damaged.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 24 months from the date of purchase. Beyond 24 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if

1. the product(s) is/are broken down, reconstructed and/ or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use. For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com

※ All images, texts and statements specified herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Worldwide Warranty Service

Model number                       Date of purchase

——————————     ——————————
Serial number                        Store Stamp

——————————     ——————————

This is the certificate of authenticity if this item and we confirm that it has been subjected to the most exacting quality controls by SYSMAX Innovations Co., Ltd.

NOTE: Please ensure this warranty card is fully completed by the distributor or retailer after purchasing the product. Should the product fail to operate correctly during the warranty period, it may be returned with the completed warranty card and original sales receipt to the retailer or local distributor for replacement or repair.
Customer Service Email: service@nitecore.com

SYSMAX Innovations Co., Ltd.

TEL:           +86-20-83862000
FAX:          +86-20-83882723
E-mail:    info@nitecore.com Web: www.nitecore.com

Address： Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou,

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>