Mi Temperature and Humidity Monitor 2 LYWSD03MMC User Manual
- June 7, 2024
- Mi
Table of Contents
Mi Temperature and Humidity Monitor 2 LYWSD03MMC User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Front
Note:
Do not obstruct the ventilation holes when installing or using the monitor
Note:
To use the lanyard hole, remove the back cover of the monitor first.
Rear
Note:
Do not obstruct the ventilation holes when installing or using the monitor.
Accessory
Installation
Installing the Battery
Remove the cover from the cover opening of the monitor, and place a CR2032
battery with the positive (+) side facing upwards, then reinstall the cover.
Note: Battery is not included and sold separately.
You can use and install your monitor in the following ways
- Placing: Directly place the monitor on the surface of the furniture such as table, bookshelf.
- Using the adhesive sticker: Remove the release liner from one side of the adhesive sticker to stick it on the back of the monitor, then remove the release liner from the other side to stick it atthe desired place on the wall.
- Hanging: Remove the back cover of the monitor, and lead the lanyard’s loop through the hole and around the hook. Reinstall the back cover, then hang the monitor.
Note: Lanyard is not included and sold separately.
Display Description
Symbol Instructions
Temperature
Humidity
|
Less than 19°C
|
Between 19°C and 27°C
|
More than 27°C
---|---|---|---
Less than 20%
| | | ****
Between 20%
and 85%
| | | ****
More than 85%
| | |
Low Battery Notification
When the battery is at a low level, this symbol appears on the display. Please
replace the battery
Smart Connection
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and
interact it and other smart home devices with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search “Mi
Home/Xiaomi Home” in the app store to download and install it.
http://home.mi.com/do/index.html?model=miaomiaoce.sensor_ht.t2
Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow
prompts to add your device.
The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note
The version of the app might have been updated, please follow the
instructions based on the current app version.
Connect with Other Devices
Make sure your temperature and humidity monitor is connected with Mi
Home/Xiaomi Home app. Tap ” ” on the upper right corner of the monitor’s user
interface, then follow the on-screen instructions to connect with other smart
devices.
Note
The monitor can only connect with these devices supporting the function of
Mi Bluetooth Gateway. Please contact the customer service for detailed
information.
Restoring Factory Settings
Remove the back cover when the monitor is working normally, and use a
conductive material to connect the two contact points above the battery for
about 5–8 seconds. Once the monitor restarts, the factory settings have been
restored and previously saved data has been cleared.
Daily Care & Maintenance
- Please prevent water from getting into the monitor when cleaning it.
- When the surface of the monitor is dirty, it can be wiped clean using a damp so cloth with some neutral detergent.
Precautions
- Do not immerse the ventilation holes into any liquid.
- Do not remove the monitor from a wall with force if it is attached with the adhesive sticker, so as to avoid damage to the wall or the monitor.
- This monitor is not suitable for use in environments with temperatures below 0°C. Please keep it away from harsh environments with high temperatures or high humidity.
- This monitor is designed to facilitate a healthy lifestyle, but should not be used as a measuring tool.
Specifications
Name: Mi Temperature and Humidity Monitor 2
Model: LYWSD03MMC
Materials: ABS & PMMA
Dimensions: 43 × 43 × 12.5 mm
Net Weight: 18 g
Operating Voltage : DC 2.5–3 V
Battery Type: CR2032 (Not included)
Wireless Connectivity : Bluetooth 4.2 Bluetooth Low Energy
Frequency Range : 2402MHz-2480MHz
Temperature Measurement Range : 0°C to 60°C
Temperature Accuracy : ± 0.1°C
Humidity Measurement Range: 0–99% RH
Humidity Accuracy: ± 1% RH
Note:
Illustrations of product, accessories, and user interface in the user manual
are for reference purposes only. Actual product and functions may vary due to
product enhancements.
Hereby, MiaoMiaoCe Technology (Beijing) Co., Ltd. declares that the radio equipment type LYWSD03MMC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/- declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment toa designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARRANTY NOTICE
As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi’s official website https://www.mi.com/en/service/warranty/. Except as prohibited by laws or otherwise promised by Xiaomi, the aer-sales services shall be limited to the country or region of the original purchase. Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace or refund your product. Normal wear and tear, force majeure, abuse or damage caused by the user’s negligence or fault are not warranted. The contact person for the aer-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify. The present warranties do not apply in Hong Kong and Taiwan. Products which were not duly imported and/or were 11 not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>