Better Bathrooms Non-Illuminated Bathroom Mirror and Furniture Installation Guide
- June 7, 2024
- Better Bathrooms
Table of Contents
INSTALLATION MANUAL
Non-Illuminated Bathroom Mirror and Furniture
Thank you for choosing a Better Bathrooms Product
Please read this user manual before installing and using this product
Keep it safe for future reference.
Visit our page
www.betterbathrooms.com/for our entire
range of Mirrors
and Furniture
INSTALLATION TOOLS
PARTS LIST
Product| Description| Qty| Description| Qty| Description| Qty| Description|
City| Description| Qty| Description| City| Description| Qty
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
2497524976| | | | | | | Round door| | Round handle| | Shell Door| 2| Shell
Handle| 4
24977| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| handle| 2| screw| 2|
Handle| | Screw|
2497824979| | | | | | | Round door| | Round handle| | Shell Door| 2| Shell
Handle| 4
24980| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| handle| 2| screw| 2|
Handle| | Screw|
24981| | | | | | | | | | | | | |
24982| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Plastic washer| 2| Screw
Cap| 2| | | |
24983| | | | | | | | | | | | | |
2498424985| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| Round door| 2| Round
handle| 2| | | |
24986| | | | | | | handle| | screw| | | | |
25008| | | | | | | | | | | | | |
25039| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | | | | | |
25010| | | | | | | | | | | | | |
2501125012| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | | | | | |
25013| | | | | | | | | | | | | |
2501425015| | | | | | | | | | | | | |
25016| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | | | | | |
2501725018| | | | | | | | | | 2| | | |
25019| Wall Screw| 2| Wall Plug| 2| Brass washer| 2| Plastic washer| 2| Screw
Cap| | | | |
2582625827| | | | | | | | | | | | | |
2582825829| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| Frame Screw| 12| | |
| | |
2583025831| | | | | | | | | | | | | |
2583225833| | | | | | | | | | | | | |
2584125842| | | | | | | | | | | | | |
25843| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| | | | | | | |
25838| | | | | | | Round door| | Round handle| | Shell Door| | Shell Handle|
25839| Wall Screw| 6| Wall Plug| 6| Wall Bracket| 2| handle| 1| screw| 1|
Handle| 1| Screw| 2
25840| | | | | | | | | | | | | |
26938| | | | | | | | | | | | | |
26939| Wall Screw| 2| Wall Plug| 2| Brass Washer| 2| Plastic Washer| 2| Screw
Cap| 2| | | |
26940| | | | | | | | | | | | | |
INSTALLATION – Check the product for damage prior to installation
Before any drilling is carried out, please check for pipes and wires within
the wall which could be damaged.
MIRROR INSTALLATION
Fitted to the rear of the unit are x 2 fixing brackets, measure the distance
between the two brackets and mark this distance on the wall, ensuring this is
horizontally aligned, using a spirit level.
We recommend a height for the brackets of 70” (1778mm) from the floor, but
this is customer choice.
It is recommended to install to a solid wall, but if fitting to a stud wall,
the fixings must be secured into a stud, not only into the plasterboard.
MIRROR INSTALLATION
After the position of the brackets is marked, drill the holes in the wall,
using an 8mm drill bit (not supplied), to a depth of approx 40mm.
Insert the wall plugs and tap flush with the wall surface.
MIRROR INSTALLATION
Hold the bracket up to the wall over the drilled holes and secure using the
screws provided.
Ensure the brackets on the rear of the unit are fully tightened.
Lift the product on the wall-mounted brackets to engage both sections of the
brackets.
Once installed a bead of silicone can be applied around the edges of the unit if required.
CABINET INSTALLATION
Fitted to the rear of the unit are x 2 fixing brackets, measure the distance
between the two brackets and mark this distance on the wall, ensuring this is
horizontally aligned, using a spirit level.
We recommend a height for the brackets of 27.5” (698mm) from the floor, but
this is customer choice.
It is recommended to install to a solid wall, but if fitting to a stud wall,
the fixings must be secured into a stud, not only into the plasterboard.
It is also recommended to set up the unit before installing the basin not the
unit, so any adjustment can be made, via the fixings on the unit.
CABINET INSTALLATION
After the position of the brackets is marked, drill the holes in the wall,
using an 8mm drill bit (not supplied), to a depth of approx 40mm.
Insert the wall plugs and tap flush with the wall surface and secure the wall brackets into place.
CABINET INSTALLATION
Check the brackets fitted to the unit are fully tightened.
Lift the unit onto wall-fitted brackets.
If any adjustment forward or backward / up or down is required this is possible via the fitted adjusters on the inside of the unit.
CABINET INSTALLATION
After any adjustment of the unit has been made the basin can be fitted to the
unit, by applying a bead of silicone between the unit and basin to provide a
seal and fixing for the basin to the unit.
Also run a bead of silicone along the back edge of the base where it meets the
wall.
DOOR HANDLE INSTALLATION
The doors which are to be fitted with handles, either the round or shell type
are provided with pilot holes that should be drilled to allow fitting of the
handle screw through the door and into the handle.
Drill the holes, then place the screw through the unit from inside the door, connect this to the handle and tighten
FRAMED FURNITURE ASSEMBLY
Place the frame onto the unit and screw the frame to the unit through the
holes in the frame, ensuring this is aligned with the unit edge.
Ensure this is fully secured before use
WC UNIT INSTALLATION
Drill into the wall through the rear plinth of the WC unit.
Fit the wall plug Place the screw through the washers and secure to the wall.
Fit brass screw cap to brass washer
Measure the height from the floor to height a then measure height b and allow 5mm tolerance, then measure width c and allow 5mm
Mark these dimensions on to the
front panel of the unit using a pencil
WC UNIT INSTALLATION
Remove the front panel from the unit and cut the hole to allow the waste pipe and flush pipe to pass from the cistern
It is recommended to
seal the cut edge and bottom edge of the unit, to protect against moisture
ingress
CLEANING AND MAINTENANCE
Wipe the product clean and dry regularly, especially when the product is
subject to steam or splashes.
Do not use harsh chemicals or materials on the product, as this will damage
the product and invalidate your guarantee.
To clean and maintain the product, wipe using a clean damp cloth and wipe dry
with a soft cloth.
UK SUPPORT
Call: 0871 244 0935
Office hours: 9 am – 5 pm Monday to Friday
www.BetterBathrooms.com
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
20210201 – v2