IRONRIDGE CAMO-01-M1 Hidden End Cam Instruction Manual
- June 1, 2024
- IRONRIDGE
Table of Contents
Tech Brief
CAMO™ Hidden End Cam
Solar, Sleeker Than Ever
Most solar installations use mounting rails and fasteners to secure modules to
the building structure, but these critical components often protrude from the
sides of the modules, giving arrays a coarse look.
CAMO™ is an invisible fastener that secures solar modules flush to rail ends,
creating a clean, sleek appearance.
CAMO™ works with nearly all solar modules and installs without tools or torque
specifications. It simply rotates into place to structurally secure and
electrically bond with the module.
Cam-Locking Design
CAMO’s unique design allows for a completely tool-less installation. Simply
slide CAMO™ into the rail track and rotate the ergonomic handle 90 degrees to
lock onto the module frame. It’s that easy.
Easy, Tool-Less Installation
A. PLACE CAMO™
Slide CAMO™ into rail track far enough to clear the module frame. CAMO™
requires 6” of clearance from end of rail.
B. PLACE MODULE
Place module on rails and align flush with rail ends (module cells not shown
in image to provide clarity). The module can overhang the rail no more than
1/4”.
C. SLIDE CAMO™
Pull CAMO™ towards rail end, at a 45 degree angle, so linear bonding pin
contacts the module flange edge.
D. SECURE CAMO™
Rotate handle with an upwards motion until CAMO™ snaps into rail track. Ensure
CAMO™ bonding pins are fully seated on top of module frame.
Tested & Certified
UL 2703
CAMO™ conforms to STD UL 2703 (2015) requirements and fits modules with bottom
flanges that meet specifications shown in the frame compatibility diagram on
the left.
See IronRidge® Installation Manuals for full ratings and a list of certified
compatible modules.
Certified to comply with International
Building Code, ASCE/SEI-7, and
UL 2703 Mechanical and Bonding
Requirements.
© 2023 IronRidge, Inc. All rights reserved. Visit www.ironridge.com or call 1-800-227-9523 for more information. Version 1.03