Urban Glide Bike 140 User Manual

: June 7, 2024
: Urban

Urban Glide Bike 140 User Manual

Safety and precaution

Please read the manual carefully before using the product and read the risks and safety tips in the manual. The use of an electrical product can be dangerous if the user is not watchful. Misuse and non-respect with the safety instructions does not affect the company in event of accident. Self-judgment and common sense are necessary for users to detect the possible dangers. Please verify the current regulations and laws in your country to know where and how to use your product legally. You must comply with the rules and laws that applicable to vehicles and pedestrians.

Protective equipment

Always wear the following protective equipment:
– Approved and certified helmet according to your location
– Knee pads and elbow patches
– Long sleeve t-shirt and long pants
– Gloves
– Shoes with rubber soles, never drive in barefoot or sandal. Verify to make the laces made and keep them as far as possible from the wheels and the internal system.

Driver’s advice

The user must not be more than 120 kg, the size and weight do not fully certify that the user will have full control of the vehicle. It is your responsibility to make sure that all users are aware of the risks. The recommended age for using this product is 10 years. It is your responsibility to put a younger child into consideration by taking into account their skills, maturity and ability and following the rules. Do not touch the engine or the brakes of the product immediately after use, these parts may be extremely hot.

Procedures and driving conditions

Please verify the current laws and rules in your country before using the product. Look around when using the product and pay attention to all possible risks. It is important to respect the rights and properties of everyone. For your safety do not start the accelerator if you are not on the product. This product is not designed to make jumps, acrobatic tricks and skids. Never drive on roads, near vehicles, stairs, hills, swimming pools or other streams. Please hold the handlebars with both hands. Never go on the product with more than one person. Be sure to keep your fingers and other body parts away from hot parts during use (Brake, motor, chain). Never use the product with a Mp3 player, or with your smartphone at hand. Never use the product to pull anything, as this may damage the components and wear out the battery. Never put the product in contact with water, the electrical components can be damaged and create a dangerous situation. Roll only on flat and solid surfaces. Avoid surfaces with gravel, holes, ice, which can lead to loss of control of the product. Do not drive at night or in areas where visibility is reduced. Do not ride indoors where there are carpets as they can interfere. After each use, verify that each piece is in its proper place, and that it is not damaged. Before each use, verify the following points:
– The brakes are in good condition
– All components are in good condition and in their places
– The parts with defects in the last use have been repaired or replaced according to the manufacturer’s conditions.
People who have medical follow-up or treatment such as: cardiac people, pregnant women, irresponsible people with back or neck problems, should not use the product.

Usage of the charger

Before using the product, it is necessary to charge it. A long charge may be necessary before the first use. Please refer to the battery indicator, you can charge your battery at any time to ensure the constant power. It is not necessary to wait until the battery is completely empty to charge it. Please do not use the charger of other brand, these can damage the battery of your product. To ensure a normal life cycle, it is important to charge your battery at least once every 3 months, even if you are not using product. Avoid shocks and contact with water, these are factors not covered by the warranty that may damage the battery. The supplied charger is “smart”, it will stop at 100% of the charge and not damage the battery. The charger must be in perfect condition during each use, verify the wires, the condition of connection ends and connectors. If the product does not charge, the charger may be defective, it needs to be replaced. The charger must be used only by an adult, it is important to unplug it from both sides when not charging.

Battery

Please do not store the battery in extreme temperatures. Store it below 30 ° C and above 0 ° C. If you do not use your product for 60-90 days, the battery may get worse. This loss of autonomy is due to lack of use and is therefore not covered by the warranty. At the end of its cycle, the battery must be discarded separately from the undifferentiated generic waste. Discard the batteries in the containers provided for this purpose. The recovery and recycling of batteries contributes to protect the environment and material resources conservation.

Maintenance

Please store your product in a dry, dust-free place, and avoid leaving it in a humid area or under the sun for too long. To clean your appliance, use a damp cloth and mild detergent. Do not use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean your appliance, which will damage its appearance and structure. Constantly verify the condition of components of your product, if any part is damaged, please replace it before using the product. If a part is not working, falling and injuring may occur.

Transport

If you wish to transport your product by air or other means of transport as well as its battery, please contact the local authorities and the carrier beforehand to obtain the possible prohibitions and limits of transport. Lithium batteries are considered dangerous in many countries. Please make sure that the access and transport are allowed before travelling. International law prohibits the transport of lithium batteries by air.

USING INSTRUCTION

1. On/Off

As shown in the picture, your device can be switched on and off by using the button in red. Push up to turn on. Then down to turn off.

2. Bell

There is a manual bell on the handle bar, use it for warn people around you of your arrival.

3. Battery indicator

The screen on the right handlebars allows you to track the battery power level of your device.

bars: Battery up to 100%
bars: Battery below 80%
bars: Battery below 50%
bar: Battery below 20%

4 . Charging

The charging port is located in the frame of the bike as shown in the following picture. When the battery is fully charged, the four bars turn blue.

6. Application

You can download the UrbanGlide app from the Apple store or the Play store. Your Bluetooth must be turned on in order to connect the app to your smartphone. Once the bike is detected on your smartphone, click on it via the application to connect it. The application requires at least Android 4.3 and iOS 8 to work.

7. Interface and functions

On the main interface of the application, you can find the speedometer, the battery level and the level of heating of the battery. The Bluetooth logo on the top of the screen allows you to access the Bluetooth search interface. When you click the arrow above the speedometer, the mileage is displayed in more details. When you press the padlock in the speed dial, you can lock and unlock your electric bike. When the bike is locked, it is impossible to accelerate. Finally, on the bottom of the interface, there are two icons, the first allows you access to the settings, the second allows you to have more information about navigation.

8. Lock / unlock

When you click on the padlock, the application asks you for a password to lock or unlock your electric bike. When you turn off your bike, it locks automatically, you can ride only when it is turned on. The original password is 123456, you can change it in the settings.

10. Start up

The “Startup” setting allows you two startup choices:

Zero speed start: which allows you to accelerate directly when the bike stops.
The non-zero start: which allows you to accelerate only when the bike has already taken a little speed with the help of your feet.

11. Bluetooth Name

In the “Bluetooth name” setting, you can change the Bluetooth name. The name will apply the next time you connect to the device.

12. Password

You can change the password that allows you to lock / unlock your bike. To do this, register simply with your old password, then enter your new password. If you want to change the password for the first time, use the original password “123456” and enter your new password.

13. Speed regulator

In order to use the speed regulator, it must first be activated in the settings, heading “Cruise”. Once activated, hold down a speed for 8 seconds, when the light at the bottom of your bike’s display flashes, release the accelerator, and the speed will maintain.

14. Headlight

In the headlight settings, you can choose the below two modes:

Manual: You can manually control the headlight of your bike through the application or the button on the handlebar.
Auto: The light turns on and off automatically depending on the brightness of location of the bike.

To turn on the rear lights, simply press the button directly on the rear light. There are two status: constant and flashing.
Warning: The light consumes battery, avoid leaving it on if it is not necessary.

15. Vehicle Information / Inspection

In this part, you can check the voltage, application version and the vehicle ID .This setting allows you to check the status of all components of the electric bike. If there is a malfunction, it will be automatically detected.

| TROUBLESHOOTING|
---|---|---
Problem| Possible cause| Solution

It does not work

|

The battery is not charged.

|

Charge the battery, check if the red light is on.

Connections or cables are disconnected.

|

Check that the battery is firmly seated in the product.

It does not work continuously

|

The battery needs to be charged.

|

Charge the battery, check if the red light is on.

The battery is not fully charged.

|

Make sure the power cable is well connected.

The battery may need to be replaced.

It suddenly stopped working

|

Overload, cut-off

|

Overloading may result in product failure. Turn off the product, wait 15 seconds, then turn it on again.

Fuse burnt

|

Overloading can burn fuses, you may have to replace them. For this, contact the after-sales service.

Prior to this, check the condition of all cables and connectors.

It is moving slowly

|

The brakes are not properly adjusted.

|

Check the condition of the brakes and try to loosen. If this does not work, please contact the after-sales service.

It has overloaded

|

Check that the user weighs less than the previously recommended weight.

Check that there are no objects obstructing the proper operation of the product.

Bad driving condition.

|

Make sure you are on flat, dry, and constant ground.

The tires / wheels are damaged.| Check the condition of the wheels of the

product.

DECLARATION OF CONFORMITY

We undersigned PACT GROUP hereby declare that the product.
Model: BIKE 140
Type: Electric bike.
Function: Electric bike for personal transport.
Product description: Foldable Electric bike has sits and adjustable handlebars. Meets all standards and technical directives below:

DIRECTIVES

2014/53/EU	2014/35/EU	2014/30/EU	2006/42/EC	2011/65/EU

TESTS STANDARD

EN 61000-6- 3:2007+A1:2011| EN 60335- 1:2012+A11:2014| EN ISO 12100:2010| IEC 60335-1:2010
---|---|---|---
EN 61000-6-1:2007| EN62233:2008| |
EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1|
EN 300 328 V2.1.1
EN 62479:2010

All tests were carried out by the laboratories mentioned below:

SGS-CSTC Sandards Tachnical Servicies (Shanghai) Co.,Ltd.
588 West Jindu Road, Xinqiao, songjiang, 201612 Shanghai, China
Shenzhen Anbotek Compliance Laboratory Limited
East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang street Bao’an district.
Shenzhen, Guangdong, China Contact details of the importer:
PACT GROUP
33 rue du ballon
93160 Noisy le Grand – France
Contact details of the person authorized to edit the technical document:
Fung NIM
33 rue du ballon
93160 Noisy le Grand – France
This declaration shall be issued under the responsibility of his representative.
29/06/2020.