urban ambiance UHP4030 Modern Ceiling Light Instruction Manual
- June 2, 2024
- urban ambiance
Table of Contents
urban ambiance UHP4030 Modern Ceiling Light
Specifications:
- Part Description: A Fixture
- Quantity: 1
- Hardware Contents:
- Nipple (1/8IP) – Qty: 1
- Wire nut – Qty: 3
- Mounting strap (1/8IP) – Qty: 1
- Hex nut (1/8IP) – Qty: 1
- Finial (1/8IP) – Qty: 1
- Lock washer (1/BIP) – Qty: 1
Product Usage Instructions
Safety Information:
Please read and understand the entire manual before assembling, operating, or
installing the product. Follow these safety precautions:
- Turn off electricity at the main circuit breaker panel before installation.
- Handle glass shades and bulbs with care as they are fragile.
Preparation:
- Verify that all parts are included as per the contents diagram.
- Estimated assembly time: 30 minutes.
- Tools required: Phillips screwdriver, pliers, wire stripper,safety glasses, electrical tape, ladder.
Assembly Instructions:
- Screw nipple, lock washer, and hex nut onto mounting strap.
- Attach the assembled parts onto the outlet box using mounting screws.
- Strip 3/8 of insulation from the electrical wire ends and connect white fixture wire to the white supply wire, black fixture wire to the black supply wire, and ground wires together.
- Attach the fixture to the nipple using the finial.
- Screw two lamps (not included) into fixture sockets using compatible bulbs.
Care and Maintenance:
Shut off the main power supply before cleaning or changing light bulbs. Clean
with a damp cloth; do not use abrasive or alcohol-based cleaners.
FAQ:
If you have any questions or need assistance, please contact our Customer Care Team at 1-855-303-4229 or visit our website at www.urbanambiance.com.
PRODUCT OVERVIEW
HARDWARE CONTENTS (not actual size)
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION:
- Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.
- Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs.
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that
contain alcohol.
Assembly Instructions
-
Screw nipple {AA), Lock washer {HH) and hex nut (DD) onto mounting strap (CC)
Hardware Used
-
Attach assembled parts from Step 1 onto outlet box using the mounting screws supplied with the outlet box (not included).
-
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect white fixture wire to the white supply wire from the outlet box; connect the black fixture wire to the black supply wire.
Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box.
-
Attach fixture (A) to nipple (AA) using finial (GG) to Secure tightly.
-
Screw two lamps (not included) into fixture sockets. Use 60-watt MAX incandescent medium base lamp, SBCFL or SBLED.
Questions?
Call our Customer Care Team at
1-855-303-4229